From mboxrd@z Thu Jan 1 00:00:00 1970 From: thierry.reding@gmail.com (Thierry Reding) Date: Thu, 27 Sep 2018 14:22:01 +0200 Subject: [PATCH v2 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel In-Reply-To: <20180907041948.19913-5-wens@csie.org> References: <20180907041948.19913-1-wens@csie.org> <20180907041948.19913-5-wens@csie.org> Message-ID: <20180927122201.GH29102@ulmo> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Sep 07, 2018 at 12:19:46PM +0800, Chen-Yu Tsai wrote: > This panel is marketed as Banana Pi 7" LCD display. On the back is > a sticker denoting the model name S070WV20-CT16. > > This is a 7" 800x480 panel connected through a 24-bit RGB interface. > However the panel only does 262k colors. > > Depending on the variant, the PCB attached to the panel module either > supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via > an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel > itself. > > Signed-off-by: Chen-Yu Tsai > --- > .../display/panel/bananapi,s070wv20-ct16.txt | 12 +++++++++ > drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++ > 2 files changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt Next time, please make the bindings and driver changes separate patches. Applied, thanks. Thierry -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: