From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Thu, 27 Sep 2018 19:18:31 +0200 Subject: [PATCH 05/12] drm/sun4i: sun6i_mipi_dsi: Add DSI Generic short write 2 param transfer In-Reply-To: <20180927114850.24565-6-jagan@amarulasolutions.com> References: <20180927114850.24565-1-jagan@amarulasolutions.com> <20180927114850.24565-6-jagan@amarulasolutions.com> Message-ID: <20180927171831.2nfybgn2xmc4vrgt@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Sep 27, 2018 at 05:18:43PM +0530, Jagan Teki wrote: > Short transfer write support for DCS and Generic transfer types > share similar way to process command sequence in DSI block so > add generic write 2 param transfer type macro so-that the panels > which are requesting similar transfer type may process properly. > > Also added error check for unsupporting transfer types this make > debugging easy for new transfer types. > > Signed-off-by: Jagan Teki > --- > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > index 156b371243c6..1c7e42015645 100644 > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > @@ -869,6 +869,7 @@ static ssize_t sun6i_dsi_transfer(struct mipi_dsi_host *host, > SUN6I_DSI_CMD_CTL_TX_FLAG); > > switch (msg->type) { > + case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: > case MIPI_DSI_DCS_SHORT_WRITE: > case MIPI_DSI_DCS_SHORT_WRITE_PARAM: You should order them by alphabetical order. > ret = sun6i_dsi_dcs_write_short(dsi, msg); > @@ -885,6 +886,8 @@ static ssize_t sun6i_dsi_transfer(struct mipi_dsi_host *host, > } > > default: > + dev_err(dsi->dev, "unsupported message type 0x%02x\n", > + msg->type); And this isn't an error check. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com