public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: bibby.hsieh@mediatek.com (Bibby Hsieh)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 02/11] drm/mediatek: move hardware register to node data
Date: Tue, 2 Oct 2018 16:10:32 +0800	[thread overview]
Message-ID: <20181002081041.32629-3-bibby.hsieh@mediatek.com> (raw)
In-Reply-To: <20181002081041.32629-1-bibby.hsieh@mediatek.com>

From: chunhui dai <chunhui.dai@mediatek.com>

The address of register DPI_H_FRE_CON is different in different IC.
Using of_node data to find this address.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c      | 19 ++++++++++++++++---
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h |  1 -
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 5ede1ddbaa1a..72aa43187731 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -18,6 +18,7 @@
 #include <linux/component.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_graph.h>
 #include <linux/interrupt.h>
 #include <linux/types.h>
@@ -72,6 +73,7 @@ struct mtk_dpi {
 	struct clk *tvd_clk;
 	int irq;
 	struct drm_display_mode mode;
+	const struct mtk_dpi_conf *conf;
 	enum mtk_dpi_out_color_format color_format;
 	enum mtk_dpi_out_yc_map yc_map;
 	enum mtk_dpi_out_bit_num bit_num;
@@ -110,6 +112,10 @@ struct mtk_dpi_yc_limit {
 	u16 c_bottom;
 };
 
+struct mtk_dpi_conf {
+	u32 reg_h_fre_con;
+};
+
 static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
 {
 	u32 tmp = readl(dpi->regs + offset) & ~mask;
@@ -335,7 +341,7 @@ static void mtk_dpi_config_swap_input(struct mtk_dpi *dpi, bool enable)
 
 static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
 {
-	mtk_dpi_mask(dpi, DPI_H_FRE_CON, H_FRE_2N, H_FRE_2N);
+	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
 }
 
 static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
@@ -639,6 +645,10 @@ static const struct component_ops mtk_dpi_component_ops = {
 	.unbind = mtk_dpi_unbind,
 };
 
+static const struct mtk_dpi_conf mt8173_conf = {
+	.reg_h_fre_con = 0xe0,
+};
+
 static int mtk_dpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -653,6 +663,7 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	dpi->dev = dev;
+	dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dpi->regs = devm_ioremap_resource(dev, mem);
@@ -732,8 +743,10 @@ static int mtk_dpi_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_dpi_of_ids[] = {
-	{ .compatible = "mediatek,mt8173-dpi", },
-	{}
+	{ .compatible = "mediatek,mt8173-dpi",
+	  .data = &mt8173_conf,
+	},
+	{ },
 };
 
 struct platform_driver mtk_dpi_driver = {
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
index 4b6ad4751a31..040444d7718d 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
+++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
@@ -223,6 +223,5 @@
 #define ESAV_CODE2			(0xFFF << 0)
 #define ESAV_CODE3_MSB			BIT(16)
 
-#define DPI_H_FRE_CON		0xE0
 #define H_FRE_2N			BIT(25)
 #endif /* __MTK_DPI_REGS_H */
-- 
2.12.5.2.gbdf23ab

  parent reply	other threads:[~2018-10-02  8:10 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-02  8:10 [PATCH v4 00/11] drm/mediatek: support hdmi output for mt2701 and mt7623 Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 01/11] drm/mediatek: add refcount for DPI power on/off Bibby Hsieh
2018-10-02  8:28   ` CK Hu
2018-10-02  8:10 ` Bibby Hsieh [this message]
2018-10-02  8:10 ` [PATCH v4 03/11] drm/mediatek: adjust EDGE to match clock and data Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 04/11] drm/mediatek: add clock factor for different IC Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 05/11] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge Bibby Hsieh
2018-10-02  8:32   ` CK Hu
2018-10-02  8:10 ` [PATCH v4 06/11] drm/mediatek: add dpi driver for mt2701 and mt7623 Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 07/11] drm/mediatek: separate hdmi phy to different file Bibby Hsieh
2018-10-02  8:40   ` CK Hu
2018-10-02  8:10 ` [PATCH v4 08/11] drm/mediatek: add support for SPDIF audio in HDMI Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 09/11] drm/mediatek: add hdmi driver for MT2701 and MT7623 Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 10/11] drm/mediatek: implement connection from BLS to DPI0 Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 11/11] drm/mediatek: add a error return value when clock driver has been prepared Bibby Hsieh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181002081041.32629-3-bibby.hsieh@mediatek.com \
    --to=bibby.hsieh@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox