public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: bibby.hsieh@mediatek.com (Bibby Hsieh)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 06/11] drm/mediatek: add dpi driver for mt2701 and mt7623
Date: Tue, 2 Oct 2018 16:10:36 +0800	[thread overview]
Message-ID: <20181002081041.32629-7-bibby.hsieh@mediatek.com> (raw)
In-Reply-To: <20181002081041.32629-1-bibby.hsieh@mediatek.com>

From: chunhui dai <chunhui.dai@mediatek.com>

This patch adds dpi dirver suppot for both mt2701 and mt7623.
And also support other (existing or future) chips that use
the same binding and driver.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c     | 21 +++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_drv.c |  2 ++
 2 files changed, 23 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 08915e1765f8..62a9d47df948 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -659,11 +659,29 @@ static unsigned int mt8173_calculate_factor(int clock)
 		return 3 << 1;
 }
 
+static unsigned int mt2701_calculate_factor(int clock)
+{
+	if (clock <= 64000)
+		return 16;
+	else if (clock <= 128000)
+		return 8;
+	else if (clock <= 256000)
+		return 4;
+	else
+		return 2;
+}
+
 static const struct mtk_dpi_conf mt8173_conf = {
 	.cal_factor = mt8173_calculate_factor,
 	.reg_h_fre_con = 0xe0,
 };
 
+static const struct mtk_dpi_conf mt2701_conf = {
+	.cal_factor = mt2701_calculate_factor,
+	.reg_h_fre_con = 0xb0,
+	.edge_sel_en = true,
+};
+
 static int mtk_dpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -753,6 +771,9 @@ static int mtk_dpi_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_dpi_of_ids[] = {
+	{ .compatible = "mediatek,mt2701-dpi",
+	  .data = &mt2701_conf,
+	},
 	{ .compatible = "mediatek,mt8173-dpi",
 	  .data = &mt8173_conf,
 	},
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 39721119713b..d961112fa2f5 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -424,6 +424,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
 	  .data = (void *)MTK_DSI },
 	{ .compatible = "mediatek,mt8173-dsi",
 	  .data = (void *)MTK_DSI },
+	{ .compatible = "mediatek,mt2701-dpi",
+	  .data = (void *)MTK_DPI },
 	{ .compatible = "mediatek,mt8173-dpi",
 	  .data = (void *)MTK_DPI },
 	{ .compatible = "mediatek,mt2701-disp-mutex",
-- 
2.12.5.2.gbdf23ab

  parent reply	other threads:[~2018-10-02  8:10 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-02  8:10 [PATCH v4 00/11] drm/mediatek: support hdmi output for mt2701 and mt7623 Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 01/11] drm/mediatek: add refcount for DPI power on/off Bibby Hsieh
2018-10-02  8:28   ` CK Hu
2018-10-02  8:10 ` [PATCH v4 02/11] drm/mediatek: move hardware register to node data Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 03/11] drm/mediatek: adjust EDGE to match clock and data Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 04/11] drm/mediatek: add clock factor for different IC Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 05/11] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge Bibby Hsieh
2018-10-02  8:32   ` CK Hu
2018-10-02  8:10 ` Bibby Hsieh [this message]
2018-10-02  8:10 ` [PATCH v4 07/11] drm/mediatek: separate hdmi phy to different file Bibby Hsieh
2018-10-02  8:40   ` CK Hu
2018-10-02  8:10 ` [PATCH v4 08/11] drm/mediatek: add support for SPDIF audio in HDMI Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 09/11] drm/mediatek: add hdmi driver for MT2701 and MT7623 Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 10/11] drm/mediatek: implement connection from BLS to DPI0 Bibby Hsieh
2018-10-02  8:10 ` [PATCH v4 11/11] drm/mediatek: add a error return value when clock driver has been prepared Bibby Hsieh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181002081041.32629-7-bibby.hsieh@mediatek.com \
    --to=bibby.hsieh@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox