From mboxrd@z Thu Jan 1 00:00:00 1970 From: andrew@lunn.ch (Andrew Lunn) Date: Wed, 3 Oct 2018 15:31:10 +0200 Subject: [PATCH] arm64: dts: clearfog-gt-8k: add PCIe slot description In-Reply-To: References: Message-ID: <20181003133110.GD427@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Oct 03, 2018 at 04:23:01PM +0300, Baruch Siach wrote: > This adds support for the PCIe interface on the CON4 mini-PCIe > connector. Hi Baruch Is there a dependency between this and the implementation of the reset-gpios? It would be good to at least mention if there is/is not such a dependency. You could put it under the ---. > > Signed-off-by: Baruch Siach > --- > arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts > index 2e06d82bec58..a13549749ee7 100644 > --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts > +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts > @@ -233,6 +233,13 @@ > }; > }; > > +&cp0_pcie0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&cp0_pci0_reset_pins>; > + reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > &cp0_gpio2 { > sata_reset { > gpio-hog; > -- > 2.19.0 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel