From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Mon, 8 Oct 2018 17:05:46 +0200 Subject: [linux-sunxi] Re: [PATCH 07/12] drm/sun4i: sun6i_mipi_dsi: Fix TCON DRQ set bits In-Reply-To: <45dbebe9-d0bd-4a1c-f8ee-3afd64cf35f9@openedev.com> References: <20180927114850.24565-1-jagan@amarulasolutions.com> <20180927114850.24565-8-jagan@amarulasolutions.com> <20180927165853.dpluekbqzat663q7@flea> <20181002132008.qtatwtbb3ldu75ay@flea> <45dbebe9-d0bd-4a1c-f8ee-3afd64cf35f9@openedev.com> Message-ID: <20181008150546.xob5es7gkn7t6kie@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Oct 03, 2018 at 08:52:06AM +0530, Jagan Teki wrote: > On Tuesday 02 October 2018 06:50 PM, Maxime Ripard wrote: > > On Thu, Sep 27, 2018 at 11:15:50PM +0530, Jagan Teki wrote: > > > On Thu, Sep 27, 2018 at 10:28 PM Maxime Ripard > > > wrote: > > > > > > > > On Thu, Sep 27, 2018 at 05:18:45PM +0530, Jagan Teki wrote: > > > > > TCON DRQ set bits for non-burst DSI mode can computed via > > > > > horizontal front porch instead of front porch + sync timings. > > > > > > > > > > Since there no documentation for TCON_DRQ_REG(0x7c) register > > > > > this change is taken as reference from BPI-M64-bsp. > > > > > > > > Detailing more what the issue is would be great. > > > > > > > > > Signed-off-by: Jagan Teki > > > > > --- > > > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++-- > > > > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > index 599284971ab6..9918fdb990ff 100644 > > > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > @@ -367,9 +367,9 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi, > > > > > struct mipi_dsi_device *device = dsi->device; > > > > > u32 val = 0; > > > > > > > > The computation here is in the A64 driver: > > > > > > > > if ((panel->lcd_ht - panel->lcd_x - panel->lcd_hbp) < 21) { > > > > dsi_dev[sel]->dsi_tcon_drq.bits.drq_mode = 0; > > > > } else { > > > > dsi_dev[sel]->dsi_tcon_drq.bits.drq_set = > > > > (panel->lcd_ht-panel->lcd_x-panel->lcd_hbp-20) * > > > > dsi_pixel_bits[panel->lcd_dsi_format]/(8*4); > > > > } > > > > > > > > It is testing that the sync + front porch is smaller than 21, and > > > > otherwise sets the drq. > > > > > > > > > - if ((mode->hsync_end - mode->hdisplay) > 20) { > > > > > > > > My code here is testing that the difference between hsync_end and > > > > hdisplay is superior to 20, and sets the DRQ if true. The condition is > > > > reversed, but otherwise, that difference is the front porch plus the > > > > sync length. > > > > > > True, I understand this, but does drq setting here is specific to SoC? > > > I thought of finding DRQ in A31 BSP but I couldn't find the code. do > > > you have bsp somewhere in github? > > > > > > > > > > > > + if ((mode->hsync_start - mode->hdisplay) > 20) { > > > > > > > > However, you are testing for just the front porch, unlike what your > > > > commit log is saying, and unlike what allwinner's code is saying. So > > > > this deserves some explanation. > > > > > > but A64 is doing this, do you think it's completely A64 specific or > > > testing panel with front porch drq? > > > > See the above code excerpt: > > panel->lcd_ht - panel->lcd_x - panel->lcd_hbp > > > > This is hsync + front porch. Not the sole front porch. So no, it's not > > doing this. > > => panel->lcd_ht - panel->lcd_x - panel->lcd_hbp > > from drivers/video/sunxi/disp2/disp/de/disp_lcd.c > timmings->hor_front_porch= panel_info->lcd_ht-panel_info->lcd_hbp - > panel_info->lcd_x; > > => (timmings->hor_front_porch + panel->lcd_hbp + panel->lcd_x) - > panel->lcd_x - panel->hbp > => timmings->hor_front_porch > => mode->hsync_start - mode->hdisplay > > This is simply a front porch. And this should be in your commit log as well. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: