From: kernel@esmil.dk (Emil Renner Berthing)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] spi: rockchip: adjust dma watermark and burstlen
Date: Wed, 10 Oct 2018 11:00:33 +0200 [thread overview]
Message-ID: <20181010090038.20834-3-kernel@esmil.dk> (raw)
In-Reply-To: <20181010090038.20834-1-kernel@esmil.dk>
From: Huibin Hong <huibin.hong@rock-chips.com>
Signal tx dma when spi fifo is less than half full,
and limit tx bursts to half the fifo length.
Clamp rx burst length to 1 to avoid alignment issues.
Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
drivers/spi/spi-rockchip.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 185bbdce62b1..ede3002215cd 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -458,10 +458,7 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
rxconf.direction = rs->dma_rx.direction;
rxconf.src_addr = rs->dma_rx.addr;
rxconf.src_addr_width = rs->n_bytes;
- if (rs->dma_caps.max_burst > 4)
- rxconf.src_maxburst = 4;
- else
- rxconf.src_maxburst = 1;
+ rxconf.src_maxburst = 1;
dmaengine_slave_config(rs->dma_rx.ch, &rxconf);
rxdesc = dmaengine_prep_slave_sg(
@@ -480,10 +477,7 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
txconf.direction = rs->dma_tx.direction;
txconf.dst_addr = rs->dma_tx.addr;
txconf.dst_addr_width = rs->n_bytes;
- if (rs->dma_caps.max_burst > 4)
- txconf.dst_maxburst = 4;
- else
- txconf.dst_maxburst = 1;
+ txconf.dst_maxburst = rs->fifo_len / 2;
dmaengine_slave_config(rs->dma_tx.ch, &txconf);
txdesc = dmaengine_prep_slave_sg(
@@ -581,7 +575,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_TXFTLR);
writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR);
- writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMATDLR);
+ writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_DMATDLR);
writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMARDLR);
writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR);
--
2.19.1
next prev parent reply other threads:[~2018-10-10 9:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-10 9:00 [PATCH 0/7] Enable spi dma on Rockchip RK3399 Emil Renner Berthing
2018-10-10 9:00 ` [PATCH 1/7] spi: rockchip: initialize dma_slave_config properly Emil Renner Berthing
2018-10-11 14:56 ` Applied "spi: rockchip: initialize dma_slave_config properly" to the spi tree Mark Brown
2018-10-10 9:00 ` Emil Renner Berthing [this message]
2018-10-11 14:56 ` Applied "spi: rockchip: adjust dma watermark and burstlen" " Mark Brown
2018-10-10 9:00 ` [PATCH 3/7] arm64: dts: rockchip: add rk3399 SPI DMAs Emil Renner Berthing
2018-10-16 12:32 ` Heiko Stuebner
2018-10-10 9:00 ` [PATCH 4/7] spi: rockchip: remove unneeded dma_caps Emil Renner Berthing
2018-10-11 14:56 ` Applied "spi: rockchip: remove unneeded dma_caps" to the spi tree Mark Brown
2018-10-10 9:00 ` [PATCH 5/7] spi: rockchip: mark use_dma as bool Emil Renner Berthing
2018-10-11 14:56 ` Applied "spi: rockchip: mark use_dma as bool" to the spi tree Mark Brown
2018-10-10 9:00 ` [PATCH 6/7] spi: rockchip: directly use direction constants Emil Renner Berthing
2018-10-11 14:55 ` Applied "spi: rockchip: directly use direction constants" to the spi tree Mark Brown
2018-10-10 9:00 ` [PATCH 7/7] spi: rockchip: simplify spi enable logic Emil Renner Berthing
2018-10-11 14:55 ` Applied "spi: rockchip: simplify spi enable logic" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181010090038.20834-3-kernel@esmil.dk \
--to=kernel@esmil.dk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox