From: anarsoul@gmail.com (Vasily Khoruzhick)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ASoC: sun4i-i2s: move code from startup/shutdown hooks into pm_runtime hooks
Date: Mon, 15 Oct 2018 20:11:41 -0700 [thread overview]
Message-ID: <20181016031141.16259-1-anarsoul@gmail.com> (raw)
startup() and shutdown() hooks are called for both substreams,
so stopping either substream when another is running breaks the
latter.
E.g. playback breaks if capture is stopped when playback is running.
Move code from startup() and shutdown() to resume() and suspend()
hooks respectively to fix this issue
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
v2: - rename from "ASoC: sun4i-i2s: don't try to start up
or shut down DAI if it's active"
- move code from startup/shutdown hooks into pm_runtime
sound/soc/sunxi/sun4i-i2s.c | 61 +++++++++++++++----------------------
1 file changed, 25 insertions(+), 36 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index a4aa931ebfae..daa6c08cffbc 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -644,40 +644,6 @@ static int sun4i_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
return 0;
}
-static int sun4i_i2s_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-
- /* Enable the whole hardware block */
- regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
- SUN4I_I2S_CTRL_GL_EN, SUN4I_I2S_CTRL_GL_EN);
-
- /* Enable the first output line */
- regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
- SUN4I_I2S_CTRL_SDO_EN_MASK,
- SUN4I_I2S_CTRL_SDO_EN(0));
-
-
- return clk_prepare_enable(i2s->mod_clk);
-}
-
-static void sun4i_i2s_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-
- clk_disable_unprepare(i2s->mod_clk);
-
- /* Disable our output lines */
- regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
- SUN4I_I2S_CTRL_SDO_EN_MASK, 0);
-
- /* Disable the whole hardware block */
- regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
- SUN4I_I2S_CTRL_GL_EN, 0);
-}
-
static int sun4i_i2s_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
@@ -695,8 +661,6 @@ static const struct snd_soc_dai_ops sun4i_i2s_dai_ops = {
.hw_params = sun4i_i2s_hw_params,
.set_fmt = sun4i_i2s_set_fmt,
.set_sysclk = sun4i_i2s_set_sysclk,
- .shutdown = sun4i_i2s_shutdown,
- .startup = sun4i_i2s_startup,
.trigger = sun4i_i2s_trigger,
};
@@ -869,6 +833,21 @@ static int sun4i_i2s_runtime_resume(struct device *dev)
goto err_disable_clk;
}
+ /* Enable the whole hardware block */
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+ SUN4I_I2S_CTRL_GL_EN, SUN4I_I2S_CTRL_GL_EN);
+
+ /* Enable the first output line */
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+ SUN4I_I2S_CTRL_SDO_EN_MASK,
+ SUN4I_I2S_CTRL_SDO_EN(0));
+
+ ret = clk_prepare_enable(i2s->mod_clk);
+ if (ret) {
+ dev_err(dev, "Failed to enable module clock\n");
+ goto err_disable_clk;
+ }
+
return 0;
err_disable_clk:
@@ -880,6 +859,16 @@ static int sun4i_i2s_runtime_suspend(struct device *dev)
{
struct sun4i_i2s *i2s = dev_get_drvdata(dev);
+ clk_disable_unprepare(i2s->mod_clk);
+
+ /* Disable our output lines */
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+ SUN4I_I2S_CTRL_SDO_EN_MASK, 0);
+
+ /* Disable the whole hardware block */
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+ SUN4I_I2S_CTRL_GL_EN, 0);
+
regcache_cache_only(i2s->regmap, true);
clk_disable_unprepare(i2s->bus_clk);
--
2.19.0
next reply other threads:[~2018-10-16 3:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-16 3:11 Vasily Khoruzhick [this message]
2018-10-16 7:16 ` [PATCH v2] ASoC: sun4i-i2s: move code from startup/shutdown hooks into pm_runtime hooks Maxime Ripard
2018-10-17 3:08 ` Vasily Khoruzhick
2018-10-17 7:45 ` Maxime Ripard
2018-10-17 14:41 ` Vasily Khoruzhick
2018-10-17 15:25 ` Maxime Ripard
2018-10-17 15:36 ` Vasily Khoruzhick
2018-10-17 21:01 ` Maxime Ripard
2018-10-19 16:18 ` Vasily Khoruzhick
2018-10-21 14:02 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181016031141.16259-1-anarsoul@gmail.com \
--to=anarsoul@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox