From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Thu, 25 Oct 2018 10:36:07 +0100 Subject: [PATCH v5 2/5] regulator: rk808: add RK809 and RK817 support. In-Reply-To: <1540294467-25813-3-git-send-email-tony.xie@rock-chips.com> References: <1540294467-25813-1-git-send-email-tony.xie@rock-chips.com> <1540294467-25813-3-git-send-email-tony.xie@rock-chips.com> Message-ID: <20181025093607.GO4939@dell> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, 23 Oct 2018, Tony Xie wrote: > Add support for the rk809 and rk817 regulator driver. > Their specifications are as follows? > 1. The RK809 and RK809 consist of 5 DCDCs, 9 LDOs > and have the same registers for these components except dcdc5. > 2. The dcdc5 is a boost dcdc for RK817 and is a buck for RK809. > 3. The RK817 has one switch but The Rk809 has two. > > The output voltages are configurable and are meant to supply power > to the main processor and other components. > > Signed-off-by: Tony Xie > --- > drivers/regulator/Kconfig | 4 +- > drivers/regulator/rk808-regulator.c | 657 ++++++++++++++++++++++++++++++++++-- > include/linux/mfd/rk808.h | 3 + Acked-by: Lee Jones -- Lee Jones [???] Linaro Services Technical Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog