From mboxrd@z Thu Jan 1 00:00:00 1970 From: xiaowei.bao@nxp.com (Xiaowei Bao) Date: Thu, 25 Oct 2018 19:08:58 +0800 Subject: [PATCH 3/6] PCI: layerscape: Add the EP mode support In-Reply-To: <20181025110901.5680-1-xiaowei.bao@nxp.com> References: <20181025110901.5680-1-xiaowei.bao@nxp.com> Message-ID: <20181025110901.5680-3-xiaowei.bao@nxp.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add the EP mode support. Signed-off-by: Xiaowei Bao --- .../devicetree/bindings/pci/layerscape-pci.txt | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 66df1e8..d3d7be1 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -13,12 +13,15 @@ information. Required properties: - compatible: should contain the platform identifier such as: + RC mode: "fsl,ls1021a-pcie", "snps,dw-pcie" "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie" "fsl,ls2088a-pcie" "fsl,ls1088a-pcie" "fsl,ls1046a-pcie" "fsl,ls1012a-pcie" + EP mode: + "fsl,ls-pcie-ep" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. -- 1.7.1