From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Mon, 29 Oct 2018 10:30:05 +0100 Subject: [PATCH v3 15/25] drm/sun4i: sun6i_mipi_dsi: Set proper vblk timing calculation In-Reply-To: <20181026144344.27778-16-jagan@amarulasolutions.com> References: <20181026144344.27778-1-jagan@amarulasolutions.com> <20181026144344.27778-16-jagan@amarulasolutions.com> Message-ID: <20181029093005.6kg7pc5z63gi6lzb@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Oct 26, 2018 at 08:13:34PM +0530, Jagan Teki wrote: > Unlike hblk, the vblk timings should follow an equation to compute > the desired value for lane 4 devices and rest of devices it would be 0. > > BSP code from BPI-M64-bsp is computing vblk as for 4-lane devices > (in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) > tmp = (ht*dsi_pixel_bits[format]/8)*vt-(4+dsi_hblk+2); > dsi_vblk = (lane-tmp%lane); > > So, update the vblk timing calculation accordingly. > > Tested on 2-lane, 4-lane MIPI-DSI LCD panels. > > Signed-off-by: Jagan Teki > Tested-by: Jagan Teki > --- > Changes for v3: > - new patch > Changes for v2: > - none > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 13 ++++++++++++- > 1 file changed, 12 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > index 20e330186b7f..42bd7506abaf 100644 > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > @@ -511,8 +511,19 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, > * Allwinner BSP is using a rather convoluted calculation > * there only for 4 lanes. However, using 0 (the !4 lanes > * case) even with a 4 lanes screen seems to work... Since you're adding the support for 2 lanes DSI displays, that should be removed. > + * > + * The vertical blank is set using a blanking packet (4 bytes + > + * payload + 2 bytes). Its minimal size is therefore 6 bytes > */ > - vblk = 0; > +#define VBLK_PACKET_OVERHEAD 6 > + if (device->lanes == 4) { > + int tmp; > + > + tmp = (mode->htotal * Bpp) * mode->vtotal - (hblk + VBLK_PACKET_OVERHEAD); > + vblk =(device->lanes - tmp % device->lanes); This generates a checkpatch warning. You should run all your patches through checkpatch before sending them. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 228 bytes Desc: not available URL: