From mboxrd@z Thu Jan 1 00:00:00 1970 From: benjamin.gaignard@linaro.org (Benjamin Gaignard) Date: Wed, 31 Oct 2018 10:30:28 +0100 Subject: [PATCH 1/5] dt-bindings: hwlock: Document STM32 hwspinlock bindings In-Reply-To: <20181031093032.20386-1-benjamin.gaignard@st.com> References: <20181031093032.20386-1-benjamin.gaignard@st.com> Message-ID: <20181031093032.20386-2-benjamin.gaignard@st.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add bindings for STM32 hardware spinlock device Signed-off-by: Benjamin Gaignard --- .../bindings/hwlock/st,stm32-hwspinlock.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt new file mode 100644 index 000000000000..7a999479d802 --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt @@ -0,0 +1,23 @@ +STM32 Hardware Spinlock Device Binding +------------------------------------- + +Required properties : +- compatible : should be "st,stm32-hwspinlock". +- reg : the register address of hwspinlock. +- #hwlock-cells : hwlock users only use the hwlock id to represent a specific + hwlock, so the number of cells should be <1> here. +- clock-names : Must contain "hwspinlock". +- clocks : Must contain a phandle entry for the clock in clock-names, see the + common clock bindings. + +Please look at the generic hwlock binding for usage information for consumers, +"Documentation/devicetree/bindings/hwlock/hwlock.txt" + +Example of hwlock provider: + hwspinlock at 4c000000 { + compatible = "st,stm32-hwspinlock"; + #hwlock-cells = <1>; + reg = <0x4c000000 0x400>; + clocks = <&rcc HSEM>; + clock-names = "hwspinlock"; + }; -- 2.15.0