From: christoffer.dall@arm.com (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/7] arm64/kvm: context-switch ptrauth registers
Date: Fri, 2 Nov 2018 09:37:25 +0100 [thread overview]
Message-ID: <20181102083725.GV12057@e113682-lin.lund.arm.com> (raw)
In-Reply-To: <1539773280-4159-3-git-send-email-amit.kachhap@arm.com>
On Wed, Oct 17, 2018 at 04:17:55PM +0530, Amit Daniel Kachhap wrote:
> From: Mark Rutland <mark.rutland@arm.com>
>
> When pointer authentication is supported, a guest may wish to use it.
> This patch adds the necessary KVM infrastructure for this to work.
>
> When we schedule a vcpu, we enable guest usage of pointer
> authentication instructions and accesses to the keys. After these are
> enabled, we allow context-switching the keys.
>
> Pointer authentication consists of address authentication and generic
> authentication, and CPUs in a system might have varied support for
> either. Where support for either feature is not uniform, it is hidden
> from guests via ID register emulation, as a result of the cpufeature
> framework in the host.
>
> Unfortunately, address authentication and generic authentication cannot
> be trapped separately, as the architecture provides a single EL2 trap
> covering both. If we wish to expose one without the other, we cannot
> prevent a (badly-written) guest from intermittently using a feature
> which is not uniformly supported (when scheduled on a physical CPU which
> supports the relevant feature). When the guest is scheduled on a
> physical CPU lacking the feature, these attempts will result in an UNDEF
> being taken by the guest.
>
> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Christoffer Dall <christoffer.dall@arm.com>
> Cc: kvmarm at lists.cs.columbia.edu
> ---
> arch/arm/include/asm/kvm_host.h | 2 +
> arch/arm64/include/asm/cpufeature.h | 6 +++
> arch/arm64/include/asm/kvm_host.h | 29 +++++++++++++++
> arch/arm64/include/asm/kvm_hyp.h | 7 ++++
> arch/arm64/kernel/traps.c | 1 +
> arch/arm64/kvm/handle_exit.c | 24 +++++++-----
> arch/arm64/kvm/hyp/Makefile | 1 +
> arch/arm64/kvm/hyp/ptrauth-sr.c | 73 +++++++++++++++++++++++++++++++++++++
> arch/arm64/kvm/hyp/switch.c | 8 ++++
> arch/arm64/kvm/sys_regs.c | 40 ++++++++++++++++----
> virt/kvm/arm/arm.c | 3 ++
> 11 files changed, 177 insertions(+), 17 deletions(-)
> create mode 100644 arch/arm64/kvm/hyp/ptrauth-sr.c
>
[...]
> diff --git a/arch/arm64/kvm/hyp/ptrauth-sr.c b/arch/arm64/kvm/hyp/ptrauth-sr.c
> new file mode 100644
> index 0000000..6e96908
> --- /dev/null
> +++ b/arch/arm64/kvm/hyp/ptrauth-sr.c
> @@ -0,0 +1,73 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * arch/arm64/kvm/hyp/ptrauth-sr.c: Guest/host ptrauth save/restore
> + *
> + * Copyright 2018 Arm Limited
> + * Author: Mark Rutland <mark.rutland@arm.com>
> + * Amit Daniel Kachhap <amit.kachhap@arm.com>
> + */
> +#include <linux/compiler.h>
> +#include <linux/kvm_host.h>
> +
> +#include <asm/cpucaps.h>
> +#include <asm/cpufeature.h>
> +#include <asm/kvm_asm.h>
> +#include <asm/kvm_hyp.h>
> +#include <asm/pointer_auth.h>
> +
> +static __always_inline bool __hyp_text __ptrauth_is_enabled(struct kvm_vcpu *vcpu)
> +{
> + return vcpu->arch.hcr_el2 & (HCR_API | HCR_APK);
> +}
> +
> +#define __ptrauth_save_key(regs, key) \
> +({ \
> + regs[key ## KEYLO_EL1] = read_sysreg_s(SYS_ ## key ## KEYLO_EL1); \
> + regs[key ## KEYHI_EL1] = read_sysreg_s(SYS_ ## key ## KEYHI_EL1); \
> +})
> +
> +static __always_inline void __hyp_text __ptrauth_save_state(struct kvm_cpu_context *ctxt)
> +{
> + __ptrauth_save_key(ctxt->sys_regs, APIA);
> + __ptrauth_save_key(ctxt->sys_regs, APIB);
> + __ptrauth_save_key(ctxt->sys_regs, APDA);
> + __ptrauth_save_key(ctxt->sys_regs, APDB);
> + __ptrauth_save_key(ctxt->sys_regs, APGA);
> +}
> +
> +#define __ptrauth_restore_key(regs, key) \
> +({ \
> + write_sysreg_s(regs[key ## KEYLO_EL1], SYS_ ## key ## KEYLO_EL1); \
> + write_sysreg_s(regs[key ## KEYHI_EL1], SYS_ ## key ## KEYHI_EL1); \
> +})
> +
> +static __always_inline void __hyp_text __ptrauth_restore_state(struct kvm_cpu_context *ctxt)
> +{
> + __ptrauth_restore_key(ctxt->sys_regs, APIA);
> + __ptrauth_restore_key(ctxt->sys_regs, APIB);
> + __ptrauth_restore_key(ctxt->sys_regs, APDA);
> + __ptrauth_restore_key(ctxt->sys_regs, APDB);
> + __ptrauth_restore_key(ctxt->sys_regs, APGA);
> +}
> +
> +void __no_ptrauth __hyp_text __ptrauth_switch_to_guest(struct kvm_vcpu *vcpu,
> + struct kvm_cpu_context *host_ctxt,
> + struct kvm_cpu_context *guest_ctxt)
> +{
> + if (!__ptrauth_is_enabled(vcpu))
> + return;
> +
> + __ptrauth_save_state(host_ctxt);
> + __ptrauth_restore_state(guest_ctxt);
> +}
> +
> +void __no_ptrauth __hyp_text __ptrauth_switch_to_host(struct kvm_vcpu *vcpu,
> + struct kvm_cpu_context *host_ctxt,
> + struct kvm_cpu_context *guest_ctxt)
> +{
> + if (!__ptrauth_is_enabled(vcpu))
> + return;
> +
> + __ptrauth_save_state(guest_ctxt);
> + __ptrauth_restore_state(host_ctxt);
> +}
> diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> index fa7dab9..714ee5b 100644
> --- a/arch/arm64/kvm/hyp/switch.c
> +++ b/arch/arm64/kvm/hyp/switch.c
> @@ -508,6 +508,8 @@ int kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
> sysreg_restore_guest_state_vhe(guest_ctxt);
> __debug_switch_to_guest(vcpu);
>
> + __ptrauth_switch_to_guest(vcpu, host_ctxt, guest_ctxt);
> +
> __set_guest_arch_workaround_state(vcpu);
>
> do {
> @@ -519,6 +521,8 @@ int kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
>
> __set_host_arch_workaround_state(vcpu);
>
> + __ptrauth_switch_to_host(vcpu, host_ctxt, guest_ctxt);
> +
> sysreg_save_guest_state_vhe(guest_ctxt);
>
> __deactivate_traps(vcpu);
> @@ -562,6 +566,8 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
> __sysreg_restore_state_nvhe(guest_ctxt);
> __debug_switch_to_guest(vcpu);
>
> + __ptrauth_switch_to_guest(vcpu, host_ctxt, guest_ctxt);
> +
> __set_guest_arch_workaround_state(vcpu);
>
> do {
> @@ -573,6 +579,8 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
>
> __set_host_arch_workaround_state(vcpu);
>
> + __ptrauth_switch_to_host(vcpu, host_ctxt, guest_ctxt);
> +
> __sysreg_save_state_nvhe(guest_ctxt);
> __sysreg32_save_state(vcpu);
> __timer_disable_traps(vcpu);
Two questions:
- Can we limit all ptrauth functionality to VHE systems so that we
don't need to touch the non-VHE path and so that we don't need any of
the __hyp_text stuff?
- Can we move all the save/restore logic to vcpu load/put as long as
the host kernel itself isn't using ptrauth, and if the host kernel at
some point begins to use ptrauth, can we have a hook to save/restore
at that time (similar to what we do for FPSIMD) to avoid this
overhead on every switch?
Thanks,
Christoffer
next prev parent reply other threads:[~2018-11-02 8:37 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-17 10:47 [PATCH v3 0/7] Add ARMv8.3 pointer authentication for kvm guest Amit Daniel Kachhap
2018-10-17 10:47 ` [PATCH v3 1/7] arm64/kvm: preserve host HCR_EL2 value Amit Daniel Kachhap
2018-10-17 10:47 ` [PATCH v3 2/7] arm64/kvm: context-switch ptrauth registers Amit Daniel Kachhap
2018-11-02 8:37 ` Christoffer Dall [this message]
2018-11-12 22:32 ` Catalin Marinas
2018-11-13 13:44 ` Christoffer Dall
2018-11-15 14:33 ` Amit Daniel Kachhap
2018-10-17 10:47 ` [PATCH v3 3/7] arm64/kvm: add a userspace option to enable pointer authentication Amit Daniel Kachhap
2018-10-17 10:47 ` [PATCH v3 4/7] arm64/kvm: enable pointer authentication cpufeature conditionally Amit Daniel Kachhap
2018-10-17 10:47 ` [PATCH v3 5/7] arm64/kvm: control accessibility of ptrauth key registers Amit Daniel Kachhap
2018-10-17 10:47 ` [PATCH v3 6/7] arm64: docs: document KVM support of pointer authentication Amit Daniel Kachhap
2018-11-02 8:39 ` Christoffer Dall
2018-10-17 10:48 ` [PATCH v3 7/7] arm/kvm: arm64: Add a vcpu feature for " Amit Daniel Kachhap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181102083725.GV12057@e113682-lin.lund.arm.com \
--to=christoffer.dall@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).