From mboxrd@z Thu Jan 1 00:00:00 1970 From: benjamin.gaignard@linaro.org (Benjamin Gaignard) Date: Mon, 12 Nov 2018 16:23:38 +0100 Subject: [PATCH v3 0/4] Add support of STM32 hwspinlock Message-ID: <20181112152342.6561-1-benjamin.gaignard@st.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This serie adds the support of the hardware semaphore block for stm32mp1 SoC. version 3: - fix clock name in properties description. - use postcore_initcall() instead of module_platform_driver() version 2: - fix comments done by Bjorn about clock naming, license terms in header, alphabetic ordering in Makefile and Kconfig and remove function - Do not push test module in this version while waiting for feedbacks about it Benjamin Gaignard (4): dt-bindings: hwlock: Document STM32 hwspinlock bindings hwspinlock: add STM32 hwspinlock device ARM: dts: stm32: Add hwspinlock node for stm32mp157 SoC ARM: dts: stm32: enable hwspinlock on stm32mp157c-ed1 .../bindings/hwlock/st,stm32-hwspinlock.txt | 23 +++ arch/arm/boot/dts/stm32mp157c-ed1.dts | 4 + arch/arm/boot/dts/stm32mp157c.dtsi | 9 ++ drivers/hwspinlock/Kconfig | 9 ++ drivers/hwspinlock/Makefile | 1 + drivers/hwspinlock/stm32_hwspinlock.c | 156 +++++++++++++++++++++ 6 files changed, 202 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt create mode 100644 drivers/hwspinlock/stm32_hwspinlock.c -- 2.15.0