From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] dt-binding: mediatek-dwmac: add binding document for MediaTek MT2712 DWMAC
Date: Mon, 12 Nov 2018 10:22:07 -0600 [thread overview]
Message-ID: <20181112162204.GA8910@bogus> (raw)
In-Reply-To: <1540782294-27721-3-git-send-email-biao.huang@mediatek.com>
On Mon, Oct 29, 2018 at 11:04:54AM +0800, Biao Huang wrote:
> The commit adds the device tree binding documentation for the MediaTek DWMAC
> found on MediaTek MT2712.
>
> Signed-off-by: Biao Huang <biao.huang@mediatek.com>
> ---
> .../devicetree/bindings/net/mediatek-dwmac.txt | 49 ++++++++++++++++++++
> 1 file changed, 49 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/mediatek-dwmac.txt
>
> diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
> new file mode 100644
> index 0000000..8baf0e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
> @@ -0,0 +1,49 @@
> +MediaTek DWMAC glue layer controller
> +
> +This file documents platform glue layer for stmmac.
> +Please see stmmac.txt for the other unchanged properties.
> +
> +The device node has following properties.
> +
> +Required properties:
> +- compatible: Should be "mediatek,mt2712-gmac" for MT2712 SoC
> +- reg: Address and length of the register set for the device
> +- interrupts: Should contain the MAC interrupts
> +- interrupt-names: Should contain a list of interrupt names corresponding to
> + the interrupts in the interrupts property, if available.
> + Should be "macirq" for the main MAC IRQ
> +- clocks: Must contain a phandle for each entry in clock-names.
> +- clock-names: the name of the clock listed in the clocks property. These are
> + "axi", "apb", "mac_ext", "mac_parent", "ptp_ref", "ptp_parent", "ptp_top"
> + for MT2712 SoC
Clocks should represent the physical clocks connected to a block. Parent
clocks are not in that category.
> +- mac-address: See ethernet.txt in the same directory
> +- phy-mode: See ethernet.txt in the same directory
> +
> +Example:
> +
> + eth: ethernet at 1101c000 {
> + compatible = "mediatek,mt2712-gmac";
> + reg = <0 0x1101c000 0 0x1300>;
> + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "macirq";
> + phy-mode ="rgmii-id";
> + mac-address = [00 55 7b b5 7d f7];
> + clock-names = "axi",
> + "apb",
> + "mac_ext",
> + "mac_parent",
> + "ptp_ref",
> + "ptp_parent",
> + "ptp_top";
> + clocks = <&pericfg CLK_PERI_GMAC>,
> + <&pericfg CLK_PERI_GMAC_PCLK>,
> + <&topckgen CLK_TOP_ETHER_125M_SEL>,
> + <&topckgen CLK_TOP_ETHERPLL_125M>,
> + <&topckgen CLK_TOP_ETHER_50M_SEL>,
> + <&topckgen CLK_TOP_APLL1_D3>,
> + <&topckgen CLK_TOP_APLL1>;
> + snps,txpbl = <32>;
> + snps,rxpbl = <32>;
> + snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
> + snps,reset-active-low;
> + };
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2018-11-12 16:22 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-29 3:04 [v2, PATCH 0/2] add Ethernet driver support for mt2712 Biao Huang
2018-10-29 3:04 ` [PATCH 1/2] net:stmmac: dwmac-mediatek: add " Biao Huang
2018-10-29 10:08 ` Corentin Labbe
2018-10-30 7:16 ` biao huang
2018-10-30 11:56 ` Andrew Lunn
2018-10-29 12:27 ` Andrew Lunn
2018-10-30 7:11 ` biao huang
2018-10-29 3:04 ` [PATCH 2/2] dt-binding: mediatek-dwmac: add binding document for MediaTek MT2712 DWMAC Biao Huang
2018-11-12 16:22 ` Rob Herring [this message]
2018-11-16 6:58 ` biao huang
2018-10-29 3:32 ` [v2, PATCH 0/2] add Ethernet driver support for mt2712 biao huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181112162204.GA8910@bogus \
--to=robh@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).