From mboxrd@z Thu Jan  1 00:00:00 1970
From: benjamin.gaignard@linaro.org (Benjamin Gaignard)
Date: Wed, 14 Nov 2018 10:00:23 +0100
Subject: [PATCH v4 0/4] Add support of STM32 hwspinlock
Message-ID: <20181114090027.7580-1-benjamin.gaignard@linaro.org>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

This serie adds the support of the hardware semaphore block for stm32mp1 SoC.

version 4:
- add Linaro SoB

version 3:
- fix clock name in properties description.
- use postcore_initcall() instead of module_platform_driver()

version 2:
- fix comments done by Bjorn about clock naming, license terms in header,
  alphabetic ordering in Makefile and Kconfig and remove function
- Do not push test module in this version while waiting for feedbacks about it

Benjamin Gaignard (4):
  dt-bindings: hwlock: Document STM32 hwspinlock bindings
  hwspinlock: add STM32 hwspinlock device
  ARM: dts: stm32: Add hwspinlock node for stm32mp157 SoC
  ARM: dts: stm32: enable hwspinlock on stm32mp157c-ed1

 .../bindings/hwlock/st,stm32-hwspinlock.txt        |  23 +++
 arch/arm/boot/dts/stm32mp157c-ed1.dts              |   4 +
 arch/arm/boot/dts/stm32mp157c.dtsi                 |   9 ++
 drivers/hwspinlock/Kconfig                         |   9 ++
 drivers/hwspinlock/Makefile                        |   1 +
 drivers/hwspinlock/stm32_hwspinlock.c              | 156 +++++++++++++++++++++
 6 files changed, 202 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
 create mode 100644 drivers/hwspinlock/stm32_hwspinlock.c

-- 
2.15.0