From: steve.capper@arm.com (Steve Capper)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 1/5] mm: mmap: Allow for "high" userspace addresses
Date: Wed, 14 Nov 2018 13:39:16 +0000 [thread overview]
Message-ID: <20181114133920.7134-2-steve.capper@arm.com> (raw)
In-Reply-To: <20181114133920.7134-1-steve.capper@arm.com>
This patch adds support for "high" userspace addresses that are
optionally supported on the system and have to be requested via a hint
mechanism ("high" addr parameter to mmap).
Architectures such as powerpc and x86 achieve this by making changes to
their architectural versions of arch_get_unmapped_* functions. However,
on arm64 we use the generic versions of these functions.
Rather than duplicate the generic arch_get_unmapped_* implementations
for arm64, this patch instead introduces two architectural helper macros
and applies them to arch_get_unmapped_*:
arch_get_mmap_end(addr) - get mmap upper limit depending on addr hint
arch_get_mmap_base(addr, base) - get mmap_base depending on addr hint
If these macros are not defined in architectural code then they default
to (TASK_SIZE) and (base) so should not introduce any behavioural
changes to architectures that do not define them.
Signed-off-by: Steve Capper <steve.capper@arm.com>
---
Changed in V3, commit log cleared up, explanation given for why core
code change over just architectural change
---
mm/mmap.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/mm/mmap.c b/mm/mmap.c
index 6c04292e16a7..7bb64381e77c 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2066,6 +2066,15 @@ unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info)
return gap_end;
}
+
+#ifndef arch_get_mmap_end
+#define arch_get_mmap_end(addr) (TASK_SIZE)
+#endif
+
+#ifndef arch_get_mmap_base
+#define arch_get_mmap_base(addr, base) (base)
+#endif
+
/* Get an address range which is currently unmapped.
* For shmat() with addr=0.
*
@@ -2085,8 +2094,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma, *prev;
struct vm_unmapped_area_info info;
+ const unsigned long mmap_end = arch_get_mmap_end(addr);
- if (len > TASK_SIZE - mmap_min_addr)
+ if (len > mmap_end - mmap_min_addr)
return -ENOMEM;
if (flags & MAP_FIXED)
@@ -2095,7 +2105,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
if (addr) {
addr = PAGE_ALIGN(addr);
vma = find_vma_prev(mm, addr, &prev);
- if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
+ if (mmap_end - len >= addr && addr >= mmap_min_addr &&
(!vma || addr + len <= vm_start_gap(vma)) &&
(!prev || addr >= vm_end_gap(prev)))
return addr;
@@ -2104,7 +2114,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
info.flags = 0;
info.length = len;
info.low_limit = mm->mmap_base;
- info.high_limit = TASK_SIZE;
+ info.high_limit = mmap_end;
info.align_mask = 0;
return vm_unmapped_area(&info);
}
@@ -2124,9 +2134,10 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
struct mm_struct *mm = current->mm;
unsigned long addr = addr0;
struct vm_unmapped_area_info info;
+ const unsigned long mmap_end = arch_get_mmap_end(addr);
/* requested length too big for entire address space */
- if (len > TASK_SIZE - mmap_min_addr)
+ if (len > mmap_end - mmap_min_addr)
return -ENOMEM;
if (flags & MAP_FIXED)
@@ -2136,7 +2147,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
if (addr) {
addr = PAGE_ALIGN(addr);
vma = find_vma_prev(mm, addr, &prev);
- if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
+ if (mmap_end - len >= addr && addr >= mmap_min_addr &&
(!vma || addr + len <= vm_start_gap(vma)) &&
(!prev || addr >= vm_end_gap(prev)))
return addr;
@@ -2145,7 +2156,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
info.low_limit = max(PAGE_SIZE, mmap_min_addr);
- info.high_limit = mm->mmap_base;
+ info.high_limit = arch_get_mmap_base(addr, mm->mmap_base);
info.align_mask = 0;
addr = vm_unmapped_area(&info);
@@ -2159,7 +2170,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
VM_BUG_ON(addr != -ENOMEM);
info.flags = 0;
info.low_limit = TASK_UNMAPPED_BASE;
- info.high_limit = TASK_SIZE;
+ info.high_limit = mmap_end;
addr = vm_unmapped_area(&info);
}
--
2.11.0
next prev parent reply other threads:[~2018-11-14 13:39 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-14 13:39 [PATCH V3 0/5] 52-bit userspace VAs Steve Capper
2018-11-14 13:39 ` Steve Capper [this message]
2018-11-23 18:17 ` [PATCH V3 1/5] mm: mmap: Allow for "high" userspace addresses Catalin Marinas
2018-11-26 12:11 ` Steve Capper
2018-11-14 13:39 ` [PATCH V3 2/5] arm64: mm: Introduce DEFAULT_MAP_WINDOW Steve Capper
2018-11-27 17:09 ` Catalin Marinas
2018-11-27 17:15 ` Ard Biesheuvel
2018-11-28 16:31 ` Steve Capper
2018-11-14 13:39 ` [PATCH V3 3/5] arm64: mm: Define arch_get_mmap_end, arch_get_mmap_base Steve Capper
2018-11-27 17:10 ` Catalin Marinas
2018-11-28 16:31 ` Steve Capper
2018-11-14 13:39 ` [PATCH V3 4/5] arm64: mm: introduce 52-bit userspace support Steve Capper
2018-11-23 18:35 ` Catalin Marinas
2018-11-26 12:13 ` Steve Capper
2018-11-30 17:59 ` Catalin Marinas
2018-12-04 17:41 ` Steve Capper
2018-11-14 13:39 ` [PATCH V3 5/5] arm64: mm: Allow forcing all userspace addresses to 52-bit Steve Capper
2018-11-23 18:22 ` Catalin Marinas
2018-11-26 12:11 ` Steve Capper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181114133920.7134-2-steve.capper@arm.com \
--to=steve.capper@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).