[PATCH v6 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller

[boris.brezillon@bootlin.com (Boris Brezillon)]

On Thu, 15 Nov 2018 14:04:00 +0100
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Hi Liang,
> 
> Liang Yang <liang.yang@amlogic.com> wrote on Thu, 15 Nov 2018 19:25:07
> +0800:
> 
> > Hi Boris,
> > 
> > I have implemented dma access base on these helpers you provided below.
> > we prepare to send v7 version now, so when will these helpers be pushed?  
> 
> Thanks for your work. You can send the v7 so we will have a look at the
> overall driver; but since we raised the DMA buffers issue we had a
> discussion with Boris about how to handle them and I think we are going
> to adopt the same solution as Wolfram in the I2C subsystem: manual
> flagging. Sadly, this is probably the best we can do to ensure proper
> DMA support.
> 
> There is nothing set is stone yet but I started a small rework to
> handle MTD operations differently (and add a DMA_SAFE flag), you can
> have a look there [1]. Don't base your work on it for now as it is just
> a preliminary version, subject to big changes.

In order to not block the driver, I'd suggest that you move the helper
I proposed directly into your driver and prefix them with 'meson_'.