From mboxrd@z Thu Jan 1 00:00:00 1970 From: paul.kocialkowski@bootlin.com (Paul Kocialkowski) Date: Thu, 15 Nov 2018 15:50:01 +0100 Subject: [PATCH 03/15] ARM: dts: sun8i-h3: Fix the system-control register range In-Reply-To: <20181115145013.3378-1-paul.kocialkowski@bootlin.com> References: <20181115145013.3378-1-paul.kocialkowski@bootlin.com> Message-ID: <20181115145013.3378-4-paul.kocialkowski@bootlin.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Unlike in previous generations, the system-control register range is not limited to a size of 0x30 on the H3. In particular, the EMAC clock configuration register (accessed through syscon) is at offset 0x30 in that range. Extend the register size to its full range (0x1000) as a result. Signed-off-by: Paul Kocialkowski --- arch/arm/boot/dts/sun8i-h3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 35d025af7deb..7157d954fb8c 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -136,7 +136,7 @@ soc { system-control at 1c00000 { compatible = "allwinner,sun8i-h3-system-control"; - reg = <0x01c00000 0x30>; + reg = <0x01c00000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges; -- 2.19.1