From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ASoC: Convert a few more users to using %pOFn instead of device_node.name
Date: Fri, 16 Nov 2018 15:43:49 -0600 [thread overview]
Message-ID: <20181116214349.20632-1-robh@kernel.org> (raw)
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: alsa-devel at alsa-project.org
Cc: linux-stm32 at st-md-mailman.stormreply.com
Cc: linux-arm-kernel at lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 2 +-
sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 2 +-
sound/soc/stm/stm32_sai.c | 8 ++++----
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c
index 192f4d7b37b6..bff7d71d0742 100644
--- a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c
+++ b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c
@@ -828,7 +828,7 @@ static int mt6797_afe_pcm_dev_probe(struct platform_device *pdev)
/* request irq */
irq_id = platform_get_irq(pdev, 0);
if (!irq_id) {
- dev_err(dev, "%s no irq found\n", dev->of_node->name);
+ dev_err(dev, "%pOFn no irq found\n", dev->of_node);
return -ENXIO;
}
ret = devm_request_irq(dev, irq_id, mt6797_afe_irq_handler,
diff --git a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
index c0b6697503fd..166aed28330d 100644
--- a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
+++ b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c
@@ -1092,7 +1092,7 @@ static int mt8173_afe_pcm_dev_probe(struct platform_device *pdev)
irq_id = platform_get_irq(pdev, 0);
if (irq_id <= 0) {
- dev_err(afe->dev, "np %s no irq\n", afe->dev->of_node->name);
+ dev_err(afe->dev, "np %pOFn no irq\n", afe->dev->of_node);
return irq_id < 0 ? irq_id : -ENXIO;
}
ret = devm_request_irq(afe->dev, irq_id, mt8173_afe_irq_handler,
diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c
index d597eba61992..bcb35cae2a2c 100644
--- a/sound/soc/stm/stm32_sai.c
+++ b/sound/soc/stm/stm32_sai.c
@@ -74,14 +74,14 @@ static int stm32_sai_sync_conf_provider(struct stm32_sai_data *sai, int synco)
return ret;
}
- dev_dbg(&sai->pdev->dev, "Set %s%s as synchro provider\n",
- sai->pdev->dev.of_node->name,
+ dev_dbg(&sai->pdev->dev, "Set %pOFn%s as synchro provider\n",
+ sai->pdev->dev.of_node,
synco == STM_SAI_SYNC_OUT_A ? "A" : "B");
prev_synco = FIELD_GET(SAI_GCR_SYNCOUT_MASK, readl_relaxed(sai->base));
if (prev_synco != STM_SAI_SYNC_OUT_NONE && synco != prev_synco) {
- dev_err(&sai->pdev->dev, "%s%s already set as sync provider\n",
- sai->pdev->dev.of_node->name,
+ dev_err(&sai->pdev->dev, "%pOFn%s already set as sync provider\n",
+ sai->pdev->dev.of_node,
prev_synco == STM_SAI_SYNC_OUT_A ? "A" : "B");
clk_disable_unprepare(sai->pclk);
return -EINVAL;
--
2.19.1
next reply other threads:[~2018-11-16 21:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-16 21:43 Rob Herring [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-10-01 21:43 [PATCH] ASoC: Convert a few more users to using %pOFn instead of device_node.name Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181116214349.20632-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).