[PATCH v2 0/4] AM654: Add pinmux support

[nm@ti.com (Nishanth Menon)]

On 11:31-20181113, Vignesh R wrote:
> Add pinmux definitions and pinctrl regions for AM654 SoCs
> and enable uart and i2c.
> 
> v2:
> Add only minimum needed macros in dt-bindings include file
> New patches to illustrate pinmux using uart and i2c
> 
> 
> Tero Kristo (1):
>   arm64: dts: ti: k3-am65: Add pinctrl regions
> 
> Vignesh R (3):
>   dt-bindings: pinctrl: k3: Introduce pinmux definitions
>   arm64: dts: ti: am654-base-board: Add pinmux for main uart0
>   arm64: dts: ti: k3-am654-base-board: Add I2C nodes
> 
>  MAINTAINERS                                   |  1 +
>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi      | 60 +++++++++++++
>  arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi       | 11 +++
>  arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi    | 19 ++++
>  arch/arm64/boot/dts/ti/k3-am65.dtsi           |  7 ++
>  .../arm64/boot/dts/ti/k3-am654-base-board.dts | 86 +++++++++++++++++++
>  include/dt-bindings/pinctrl/k3.h              | 35 ++++++++
>  7 files changed, 219 insertions(+)
>  create mode 100644 include/dt-bindings/pinctrl/k3.h

The last patch was a bit sneaky ;)... but there is nothing controversial
in it..

Series: Acked-by: Nishanth Menon <nm@ti.com>

-- 
Regards,
Nishanth Menon