[PATCH v5 01/18] arm64: dts: qcom: qcs404: add base dts files

[bjorn.andersson@linaro.org (Bjorn Andersson)]

On Fri 09 Nov 01:44 PST 2018, Vinod Koul wrote:

> Add base dts files for QCS404 chipset along with cpu, timer,
> gcc and uart2 nodes.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/qcs404.dtsi | 175 +++++++++++++++++++++++++++++++++++
>  1 file changed, 175 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qcs404.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> new file mode 100644
> index 000000000000..91abcdc78505
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -0,0 +1,175 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, Linaro Limited
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-qcs404.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <19200000>;
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu at 100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU1: cpu at 101 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x101>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU2: cpu at 102 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x102>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU3: cpu at 103 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x103>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		L2_0: l2-cache {
> +			compatible = "cache";
> +			cache-level = <2>;
> +		};
> +	};
> +
> +	memory at 80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0 0x80000000 0 0>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	soc: soc at 0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0xffffffff>;
> +		compatible = "simple-bus";
> +
> +		gcc: clock-controller at 1800000 {
> +			compatible = "qcom,gcc-qcs404";
> +			reg = <0x01800000 0x80000>;
> +			#clock-cells = <1>;
> +
> +			assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
> +			assigned-clock-rates = <19200000>;
> +		};
> +
> +		blsp1_uart2: serial at 78b1000 {
> +			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> +			reg = <0x078b1000 0x200>;
> +			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "core", "iface";
> +			status = "okay";
> +		};
> +
> +		intc: interrupt-controller at b000000 {
> +			compatible = "qcom,msm-qgic2";
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			reg = <0x0b000000 0x1000>,
> +			      <0x0b002000 0x1000>;
> +		};
> +
> +		timer at b120000 {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			compatible = "arm,armv7-timer-mem";
> +			reg = <0x0b120000 0x1000>;
> +			clock-frequency = <19200000>;
> +
> +			frame at b121000 {
> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0b121000 0x1000>,
> +				      <0x0b122000 0x1000>;
> +			};
> +
> +			frame at b123000 {
> +				frame-number = <1>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0b123000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame at b124000 {
> +				frame-number = <2>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0b124000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame at b125000 {
> +				frame-number = <3>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0b125000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame at b126000 {
> +				frame-number = <4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0b126000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame at b127000 {
> +				frame-number = <5>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0xb127000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame at b128000 {
> +				frame-number = <6>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0b128000 0x1000>;
> +				status = "disabled";
> +			};
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 2 0xff08>,
> +			     <GIC_PPI 3 0xff08>,
> +			     <GIC_PPI 4 0xff08>,
> +			     <GIC_PPI 1 0xff08>;
> +	};
> +};
> -- 
> 2.14.4
>