From: maxime.ripard@bootlin.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v2 11/14] dt-bindings: clock: Add Allwinner suniv F1C100s CCU
Date: Tue, 20 Nov 2018 09:52:29 +0100 [thread overview]
Message-ID: <20181120085229.suf3affnix3d7bi2@flea> (raw)
In-Reply-To: <5f0322d5e37726f0c597b919f59e121f0b2855c3.1542546735.git.mesihkilinc@gmail.com>
On Sun, Nov 18, 2018 at 05:17:10PM +0300, Mesih Kilinc wrote:
> Add compatiple string for Allwinner suniv F1C100s CCU.
> Add clock and reset definitions.
>
> Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
> ---
> .../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
> include/dt-bindings/clock/suniv-ccu-f1c100s.h | 69 ++++++++++++++++++++++
> include/dt-bindings/reset/suniv-ccu-f1c100s.h | 37 ++++++++++++
> 3 files changed, 107 insertions(+)
> create mode 100644 include/dt-bindings/clock/suniv-ccu-f1c100s.h
> create mode 100644 include/dt-bindings/reset/suniv-ccu-f1c100s.h
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> index 47d2e90..92c16eb 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> @@ -3,6 +3,7 @@ Allwinner Clock Control Unit Binding
>
> Required properties :
> - compatible: must contain one of the following compatibles:
> + - "allwinner,suniv-f1c100s-ccu"
Letters come after the numbers in alphabetical order, so that should
be moved at the end of that list (and you have that issue in a couple
of other patches).
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181120/76b489e1/attachment.sig>
next prev parent reply other threads:[~2018-11-20 8:52 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-18 14:16 [RFC PATCH v2 00/14] initial support for "suniv" Allwinner new ARM9 SoC Mesih Kilinc
2018-11-18 14:17 ` [RFC PATCH v2 01/14] ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7 Allwinner SoCs Mesih Kilinc
2018-11-20 8:40 ` Maxime Ripard
2018-11-18 14:17 ` [RFC PATCH v2 02/14] dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC Mesih Kilinc
2018-11-18 14:17 ` [RFC PATCH v2 03/14] ARM: sunxi: add Allwinner ARMv5 SoCs Mesih Kilinc
2018-11-20 8:42 ` Maxime Ripard
2018-11-18 14:17 ` [RFC PATCH v2 04/14] dt-bindings: interrupt-controller: Add suniv interrupt-controller Mesih Kilinc
2018-11-20 8:44 ` Maxime Ripard
2018-11-18 14:17 ` [RFC PATCH v2 05/14] irqchip/sun4i: add support for suniv interrupt controller Mesih Kilinc
2018-11-20 8:48 ` Maxime Ripard
2018-11-18 14:17 ` [RFC PATCH v2 06/14] dt-bindings: timer: Add Allwinner suniv timer Mesih Kilinc
2018-11-18 14:17 ` [RFC PATCH v2 07/14] clocksource: sun4i: add a compatible for suniv Mesih Kilinc
2018-11-18 14:17 ` [RFC PATCH v2 08/14] clocksource/drivers/sun4i: register as sched_clock on suniv Mesih Kilinc
2018-11-20 8:49 ` Maxime Ripard
2018-11-18 14:17 ` [RFC PATCH v2 09/14] dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl Mesih Kilinc
2018-11-18 14:17 ` [RFC PATCH v2 10/14] pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs) Mesih Kilinc
2018-11-18 14:17 ` [RFC PATCH v2 11/14] dt-bindings: clock: Add Allwinner suniv F1C100s CCU Mesih Kilinc
2018-11-20 8:52 ` Maxime Ripard [this message]
2018-11-18 14:17 ` [RFC PATCH v2 12/14] clk: sunxi-ng: add support for suniv F1C100s SoC Mesih Kilinc
2018-11-18 14:17 ` [RFC PATCH v2 13/14] ARM: dts: suniv: add initial DTSI file for F1C100s Mesih Kilinc
2018-11-20 8:55 ` Maxime Ripard
2018-11-18 14:17 ` [RFC PATCH v2 14/14] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano Mesih Kilinc
2018-11-20 8:56 ` [RFC PATCH v2 00/14] initial support for "suniv" Allwinner new ARM9 SoC Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181120085229.suf3affnix3d7bi2@flea \
--to=maxime.ripard@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).