[RFC PATCH v2 00/14] initial support for "suniv" Allwinner new ARM9 SoC

[RFC PATCH v2 00/14] initial support for "suniv" Allwinner new ARM9 SoC

[Mesih Kilinc]

This is the second version of RFC patchset for Allwinner ARMv5 F1C100s
SoC. Icenowy (author of the initial patchset) allowed me to continue.
For patch 1~3 which introduces first ARMv5 Allwinner SoC I looked 
freescale,imx configs and tried to organize patches better. 
Addressed comment from Maxime Ripard and added SoC name to
compatibles and filenames. 
Addressed comment from Rob Herring and added dt-bindings.

This is my first patch. Sorry for any inconvenience :-)

Original cover later:

This is the RFC initial patchset for the "new" Allwinner SUNIV ARM9 SoC.

The same die is packaged differently, come with different co-packaged
DRAM or shipped with different SDK; and then made many model names: F23,
F25, F1C100A, F1C100S, F1C200S, F1C500, F1C600, R6, etc. These SoCs all
share a common feature set and are packaged similarly (eLQFP128 for SoCs
without co-packaged DRAM, QFN88 for with DRAM). As their's no
functionality hidden on the QFN88 models (except DRAM interface not
exported), it's not clever to differentiate them. So I will use suniv as
common name of all these SoCs.

As it's the first not ARMv7+ Allwinner SoC to get supported, this
patchset firstly made CONFIG_ARCH_SUNXI a common config item, and let
selectable CONFIG_ARCH_SUNXI_V{5,7} to internally select it. This makes
reusing most work possible. This is PATCH 1~2.

The ARM9 has neither GIC nor arch_timer, like the sun4i/5i Cortex-A8
SoCs. So adapt the IRQ and timer driver used by sun4i/5i to support
suniv. This is PATCH 3~5.

Then it's the common way to support a new SoC -- pinctrl, CCU and
initial DT.

Changes since v1:
- Patch "ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7
  Allwinner SoCs"
  - Instead of using a common bool config use a common menuconfig. 
  - Use ARCH_MULTI_V7 to differentiate V7 SoCs.
  - Addressed comment from Julian Calaby
- Patch "ARM: sunxi: add Allwinner ARMv5 SoCs"
  - Use ARCH_MULTI_V5 to differentiate V5 SoCs.
  - removed "allwinner,suniv" board compatible string
  - Added dt-bindings
- Patch "irqchip/sun4i: add support for suniv interrupt controller"
  - Added dt-bindings
  - Changed "allwinner,suniv-ic" to "allwinner,suniv-f1c100s-ic"
- Patch "clocksource: sun4i: add a compatible for suniv"
  - Added dt-bindings
  - Changed "allwinner,suniv-timer" to "allwinner,suniv-f1c100s-timer"
- Patch "pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)"
  - Added dt-bindings
  - Renamed suniv-pinctrl to suniv-f1c100s-pinctrl
- Patch "clk: sunxi-ng: add support for suniv F1C100s SoC"
  - Added dt-bindings
  - Renamed suniv-ccu to suniv-f1c100s-ccu
- Patch "ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
  - Addressed comment from Rask Ingemann Lambertsen

Mesih Kilinc (14):
  ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7 Allwinner
    SoCs
  dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC
  ARM: sunxi: add Allwinner ARMv5 SoCs
  dt-bindings: interrupt-controller: Add suniv interrupt-controller
  irqchip/sun4i: add support for suniv interrupt controller
  dt-bindings: timer: Add Allwinner suniv timer
  clocksource: sun4i: add a compatible for suniv
  clocksource/drivers/sun4i: register as sched_clock on suniv
  dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl
  pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)
  dt-bindings: clock: Add Allwinner suniv F1C100s CCU
  clk: sunxi-ng: add support for suniv F1C100s SoC
  ARM: dts: suniv: add initial DTSI file for F1C100s
  ARM: suniv: f1c100s: add device tree for Lichee Pi Nano

 Documentation/devicetree/bindings/arm/sunxi.txt    |   1 +
 .../devicetree/bindings/clock/sunxi-ccu.txt        |   1 +
 .../interrupt-controller/allwinner,sun4i-ic.txt    |   5 +-
 .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt   |   1 +
 .../bindings/timer/allwinner,sun4i-timer.txt       |   5 +-
 arch/arm/boot/dts/Makefile                         |   2 +
 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts  |  26 +
 arch/arm/boot/dts/suniv-f1c100s.dtsi               | 158 ++++++
 arch/arm/mach-sunxi/Kconfig                        |  39 +-
 arch/arm/mach-sunxi/Makefile                       |   3 +-
 arch/arm/mach-sunxi/sunxi_v5.c                     |  22 +
 drivers/clk/sunxi-ng/Kconfig                       |   5 +
 drivers/clk/sunxi-ng/Makefile                      |   1 +
 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c           | 536 +++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h           |  34 ++
 drivers/clocksource/sun4i_timer.c                  |   5 +-
 drivers/irqchip/irq-sun4i.c                        |  47 +-
 drivers/pinctrl/sunxi/Kconfig                      |   4 +
 drivers/pinctrl/sunxi/Makefile                     |   1 +
 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c      | 417 ++++++++++++++++
 include/dt-bindings/clock/suniv-ccu-f1c100s.h      |  69 +++
 include/dt-bindings/reset/suniv-ccu-f1c100s.h      |  37 ++
 22 files changed, 1401 insertions(+), 18 deletions(-)
 create mode 100644 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
 create mode 100644 arch/arm/boot/dts/suniv-f1c100s.dtsi
 create mode 100644 arch/arm/mach-sunxi/sunxi_v5.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
 create mode 100644 include/dt-bindings/clock/suniv-ccu-f1c100s.h
 create mode 100644 include/dt-bindings/reset/suniv-ccu-f1c100s.h

-- 
2.7.4

[RFC PATCH v2 01/14] ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7 Allwinner SoCs

[Mesih Kilinc]

Allwinner also has some ARMv5 SoCs.

In order to add support for them, add a CONFIG_ARCH_SUNXI_V7 bool config
which is selected when a ARMv7 soc is selected, and make CONFIG_ARCH_SUNXI
a common option which is selected by both V7 and V5 sunxi option.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 arch/arm/mach-sunxi/Kconfig  | 25 +++++++++++++++++--------
 arch/arm/mach-sunxi/Makefile |  2 +-
 2 files changed, 18 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index d9c8ecf..5db17ec 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,31 +6,38 @@ menuconfig ARCH_SUNXI
 	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	select PINCTRL
-	select PM_OPP
-	select SUN4I_TIMER
 	select RESET_CONTROLLER
+	help
+	  Support for Allwinner ARM-based family of processors
 
 if ARCH_SUNXI
 
+if ARCH_MULTI_V7
+
+config ARCH_SUNXI_V7
+	bool
+	select PM_OPP
+	select SUN4I_TIMER
+
 config MACH_SUN4I
 	bool "Allwinner A10 (sun4i) SoCs support"
-	default ARCH_SUNXI
+	select ARCH_SUNXI_V7
 
 config MACH_SUN5I
 	bool "Allwinner A10s / A13 (sun5i) SoCs support"
-	default ARCH_SUNXI
+	select ARCH_SUNXI_V7
 	select SUN5I_HSTIMER
 
 config MACH_SUN6I
 	bool "Allwinner A31 (sun6i) SoCs support"
-	default ARCH_SUNXI
+	select ARCH_SUNXI_V7
 	select ARM_GIC
 	select MFD_SUN6I_PRCM
 	select SUN5I_HSTIMER
 
 config MACH_SUN7I
 	bool "Allwinner A20 (sun7i) SoCs support"
-	default ARCH_SUNXI
+	select ARCH_SUNXI_V7
 	select ARM_GIC
 	select ARM_PSCI
 	select ARCH_SUPPORTS_BIG_ENDIAN
@@ -39,13 +46,13 @@ config MACH_SUN7I
 
 config MACH_SUN8I
 	bool "Allwinner sun8i Family SoCs support"
-	default ARCH_SUNXI
+	select ARCH_SUNXI_V7
 	select ARM_GIC
 	select MFD_SUN6I_PRCM
 
 config MACH_SUN9I
 	bool "Allwinner (sun9i) SoCs support"
-	default ARCH_SUNXI
+	select ARCH_SUNXI_V7
 	select ARM_GIC
 
 config ARCH_SUNXI_MC_SMP
@@ -56,3 +63,5 @@ config ARCH_SUNXI_MC_SMP
 	select ARM_CPU_SUSPEND
 
 endif
+
+endif
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 71429aa..c9a83ab 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -1,5 +1,5 @@
 CFLAGS_mc_smp.o	+= -march=armv7-a
 
-obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
+obj-$(CONFIG_ARCH_SUNXI_V7) += sunxi.o
 obj-$(CONFIG_ARCH_SUNXI_MC_SMP) += mc_smp.o headsmp.o
 obj-$(CONFIG_SMP) += platsmp.o
-- 
2.7.4

[RFC PATCH v2 02/14] dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC

[Mesih Kilinc]

Add new Allwinner ARMv5 F1C100s SoC's compatible string

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index e4beec3..12f1b00 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -3,6 +3,7 @@ Allwinner sunXi Platforms Device Tree Bindings
 Each device tree must specify which Allwinner SoC it uses,
 using one of the following compatible strings:
 
+  allwinner,suniv-f1c100s
   allwinner,sun4i-a10
   allwinner,sun5i-a10s
   allwinner,sun5i-a13
-- 
2.7.4

[RFC PATCH v2 03/14] ARM: sunxi: add Allwinner ARMv5 SoCs

[Mesih Kilinc]

Add option for Allwinner ARMv5 SoCs and SoC F1C100s (which has a die
used for many new F-series products, including F1C100A, F1C100s, F1C200s,
F1C500, F1C600).

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 arch/arm/mach-sunxi/Kconfig    | 14 +++++++++++++-
 arch/arm/mach-sunxi/Makefile   |  1 +
 arch/arm/mach-sunxi/sunxi_v5.c | 22 ++++++++++++++++++++++
 3 files changed, 36 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-sunxi/sunxi_v5.c

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 5db17ec..066644c 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,6 +1,6 @@
 menuconfig ARCH_SUNXI
 	bool "Allwinner SoCs"
-	depends on ARCH_MULTI_V7
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
@@ -64,4 +64,16 @@ config ARCH_SUNXI_MC_SMP
 
 endif
 
+if ARCH_MULTI_V5
+
+config ARCH_SUNXI_V5
+	bool
+	select SUN4I_TIMER
+
+config MACH_SUNIV
+	bool "Allwinner new F-series (suniv) SoCs support"
+	select ARCH_SUNXI_V5
+
+endif
+
 endif
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index c9a83ab..fd17fdd 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -1,5 +1,6 @@
 CFLAGS_mc_smp.o	+= -march=armv7-a
 
 obj-$(CONFIG_ARCH_SUNXI_V7) += sunxi.o
+obj-$(CONFIG_ARCH_SUNXI_V5) += sunxi_v5.o
 obj-$(CONFIG_ARCH_SUNXI_MC_SMP) += mc_smp.o headsmp.o
 obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-sunxi/sunxi_v5.c b/arch/arm/mach-sunxi/sunxi_v5.c
new file mode 100644
index 0000000..15f2d7a
--- /dev/null
+++ b/arch/arm/mach-sunxi/sunxi_v5.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree support for Allwinner F series SoCs
+ *
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2018 Mesih Kilinc <mesihkilinc@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char * const suniv_board_dt_compat[] = {
+	"allwinner,suniv-f1c100s",
+	NULL,
+};
+
+DT_MACHINE_START(SUNXI_DT, "Allwinner suniv Family")
+	.dt_compat	= suniv_board_dt_compat,
+MACHINE_END
-- 
2.7.4

[RFC PATCH v2 04/14] dt-bindings: interrupt-controller: Add suniv interrupt-controller

[Mesih Kilinc]

Add compatible string for Alwinner suniv F1C100s SoC interrupt
controller which is stripped version of sun4i

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 .../devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt  | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
index b290ca1..e04ddb4 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
@@ -2,7 +2,10 @@ Allwinner Sunxi Interrupt Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sun4i-a10-ic"
+- compatible: should be "allwinner,<soc-familiy>-<soc-name>-ic" to identify
+	      Allwinner IRQ chip such as:
+              "allwinner,sun4i-a10-ic"
+              "allwinner,suniv-f1c100s-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
-- 
2.7.4

[RFC PATCH v2 05/14] irqchip/sun4i: add support for suniv interrupt controller

[Mesih Kilinc]

The new F-series SoCs (suniv) from Allwinner use an stripped version of
the interrupt controller in A10/A13.

Add support for it in irq-sun4i driver.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 drivers/irqchip/irq-sun4i.c | 47 ++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 42 insertions(+), 5 deletions(-)

diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c
index e3e5b91..2abf662 100644
--- a/drivers/irqchip/irq-sun4i.c
+++ b/drivers/irqchip/irq-sun4i.c
@@ -23,13 +23,26 @@
 
 #include <asm/exception.h>
 
+enum sun4i_irq_type {
+	sun4i_ic,
+	suniv_ic
+};
+
+static enum sun4i_irq_type sun4i_irq_type;
+static int sun4i_irq_enable_reg_offset;
+static int sun4i_irq_mask_reg_offset;
+
 #define SUN4I_IRQ_VECTOR_REG		0x00
 #define SUN4I_IRQ_PROTECTION_REG	0x08
 #define SUN4I_IRQ_NMI_CTRL_REG		0x0c
 #define SUN4I_IRQ_PENDING_REG(x)	(0x10 + 0x4 * x)
 #define SUN4I_IRQ_FIQ_PENDING_REG(x)	(0x20 + 0x4 * x)
-#define SUN4I_IRQ_ENABLE_REG(x)		(0x40 + 0x4 * x)
-#define SUN4I_IRQ_MASK_REG(x)		(0x50 + 0x4 * x)
+#define SUN4I_IRQ_ENABLE_REG_OFFSET	0x40
+#define SUN4I_IRQ_MASK_REG_OFFSET	0x50
+#define SUNIV_IRQ_ENABLE_REG_OFFSET	0x20
+#define SUNIV_IRQ_MASK_REG_OFFSET	0x30
+#define SUN4I_IRQ_ENABLE_REG(x)		(sun4i_irq_enable_reg_offset + 0x4 * x)
+#define SUN4I_IRQ_MASK_REG(x)		(sun4i_irq_mask_reg_offset + 0x4 * x)
 
 static void __iomem *sun4i_irq_base;
 static struct irq_domain *sun4i_irq_domain;
@@ -115,8 +128,9 @@ static int __init sun4i_of_init(struct device_node *node,
 	writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(1));
 	writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(2));
 
-	/* Enable protection mode */
-	writel(0x01, sun4i_irq_base + SUN4I_IRQ_PROTECTION_REG);
+	/* Enable protection mode (not available in suniv) */
+	if (sun4i_irq_type == sun4i_ic)
+		writel(0x01, sun4i_irq_base + SUN4I_IRQ_PROTECTION_REG);
 
 	/* Configure the external interrupt source type */
 	writel(0x00, sun4i_irq_base + SUN4I_IRQ_NMI_CTRL_REG);
@@ -130,7 +144,30 @@ static int __init sun4i_of_init(struct device_node *node,
 
 	return 0;
 }
-IRQCHIP_DECLARE(allwinner_sun4i_ic, "allwinner,sun4i-a10-ic", sun4i_of_init);
+
+static int __init sun4i_ic_of_init(struct device_node *node,
+				   struct device_node *parent)
+{
+	sun4i_irq_type = sun4i_ic;
+	sun4i_irq_enable_reg_offset = SUN4I_IRQ_ENABLE_REG_OFFSET;
+	sun4i_irq_mask_reg_offset = SUN4I_IRQ_MASK_REG_OFFSET;
+	sun4i_of_init(node, parent);
+
+	return 0;
+}
+IRQCHIP_DECLARE(allwinner_sun4i_ic, "allwinner,sun4i-a10-ic", sun4i_ic_of_init);
+
+static int __init suniv_ic_of_init(struct device_node *node,
+				   struct device_node *parent)
+{
+	sun4i_irq_type = suniv_ic;
+	sun4i_irq_enable_reg_offset = SUNIV_IRQ_ENABLE_REG_OFFSET;
+	sun4i_irq_mask_reg_offset = SUNIV_IRQ_MASK_REG_OFFSET;
+	sun4i_of_init(node, parent);
+
+	return 0;
+}
+IRQCHIP_DECLARE(allwinner_suniv_ic, "allwinner,suniv-f1c100s-ic", suniv_ic_of_init);
 
 static void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs)
 {
-- 
2.7.4

[RFC PATCH v2 06/14] dt-bindings: timer: Add Allwinner suniv timer

[Mesih Kilinc]

Add compatible string for Allwinner suniv timer which is similar to
sun4i timer.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
index 5c2e235..9c02a4b 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
@@ -2,7 +2,10 @@ Allwinner A1X SoCs Timer Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sun4i-a10-timer"
+- compatible: should be "allwinner,<soc-familiy>-<soc-name>-timer" to identify
+	      Allwinner SoCs timer such as:
+              "allwinner,sun4i-a10-timer"
+              "allwinner,suniv-f1c100s-timer"
 - reg : Specifies base physical address and size of the registers.
 - interrupts : The interrupt of the first timer
 - clocks: phandle to the source clock (usually a 24 MHz fixed clock)
-- 
2.7.4

[RFC PATCH v2 07/14] clocksource: sun4i: add a compatible for suniv

[Mesih Kilinc]

The suniv (new F-series) chip has a timer with less functionality than
the A10 timer, e.g. it has only 3 channels.

Add a new compatible for it. As we didn't use the extra channels on A10
either now, the code needn't to be changed.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 drivers/clocksource/sun4i_timer.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index 6e0180a..6b57187 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -218,3 +218,5 @@ static int __init sun4i_timer_init(struct device_node *node)
 }
 TIMER_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
 		       sun4i_timer_init);
+TIMER_OF_DECLARE(suniv, "allwinner,suniv-f1c100s-timer",
+		       sun4i_timer_init);
-- 
2.7.4

[RFC PATCH v2 08/14] clocksource/drivers/sun4i: register as sched_clock on suniv

[Mesih Kilinc]

The suniv chip (newer F-series Allwinner SoCs) is based on ARM926EJ-S
CPU, thus it has no architecture timer.

Register sun4i_timer as sched_clock on it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 drivers/clocksource/sun4i_timer.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index 6b57187..65f38f6 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -186,7 +186,8 @@ static int __init sun4i_timer_init(struct device_node *node)
 	 */
 	if (of_machine_is_compatible("allwinner,sun4i-a10") ||
 	    of_machine_is_compatible("allwinner,sun5i-a13") ||
-	    of_machine_is_compatible("allwinner,sun5i-a10s"))
+	    of_machine_is_compatible("allwinner,sun5i-a10s") ||
+	    of_machine_is_compatible("allwinner,suniv-f1c100s"))
 		sched_clock_register(sun4i_timer_sched_read, 32,
 				     timer_of_rate(&to));
 
-- 
2.7.4

[RFC PATCH v2 09/14] dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl

[Mesih Kilinc]

Add compatible string for Allwinner suniv F1C100s SoC's pinctrl.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 258a464..5086734 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -7,6 +7,7 @@ the pins includes drive strength and pull-up.
 
 Required properties:
 - compatible: Should be one of the following (depending on your SoC):
+  "allwinner,suniv-f1c100s-pinctrl"
   "allwinner,sun4i-a10-pinctrl"
   "allwinner,sun5i-a10s-pinctrl"
   "allwinner,sun5i-a13-pinctrl"
-- 
2.7.4

[RFC PATCH v2 10/14] pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)

[Mesih Kilinc]

The suniv F1C100s chip (several new F-series SoCs) of Allwinner has a
pin
controller like other SoCs from Allwinner.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 drivers/pinctrl/sunxi/Kconfig                 |   4 +
 drivers/pinctrl/sunxi/Makefile                |   1 +
 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c | 417 ++++++++++++++++++++++++++
 3 files changed, 422 insertions(+)
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c

diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index 95282cd..a731fc9 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -6,6 +6,10 @@ config PINCTRL_SUNXI
 	select GENERIC_PINCONF
 	select GPIOLIB
 
+config PINCTRL_SUNIV_F1C100S
+	def_bool MACH_SUNIV
+	select PINCTRL_SUNXI
+
 config PINCTRL_SUN4I_A10
 	def_bool MACH_SUN4I || MACH_SUN7I || MACH_SUN8I
 	select PINCTRL_SUNXI
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index adb8443..fafcdae 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -3,6 +3,7 @@
 obj-y					+= pinctrl-sunxi.o
 
 # SoC Drivers
+obj-$(CONFIG_PINCTRL_SUNIV_F1C100S)	+= pinctrl-suniv-f1c100s.o
 obj-$(CONFIG_PINCTRL_SUN4I_A10)		+= pinctrl-sun4i-a10.o
 obj-$(CONFIG_PINCTRL_SUN5I)		+= pinctrl-sun5i.o
 obj-$(CONFIG_PINCTRL_SUN6I_A31)		+= pinctrl-sun6i-a31.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
new file mode 100644
index 0000000..46d5667
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
@@ -0,0 +1,417 @@
+/*
+ * Allwinner new F-series F1C100s SoC (suniv) pinctrl driver.
+ *
+ * Copyright (C) 2018 Icenowy Zheng
+ *
+ * Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Copyright (C) 2014 Jackie Hwang
+ *
+ * Jackie Hwang <huangshr@allwinnertech.com>
+ *
+ * Copyright (C) 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * Copyright (C) 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-sunxi.h"
+static const struct sunxi_desc_pin suniv_f1c100s_pins[] = {
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "rtp"),		/* X1 */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* BCLK */
+		  SUNXI_FUNCTION(0x5, "uart1"),		/* RTS */
+		  SUNXI_FUNCTION(0x6, "spi1")),		/* CS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "rtp"),		/* X2 */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* LRCK */
+		  SUNXI_FUNCTION(0x5, "uart1"),		/* CTS */
+		  SUNXI_FUNCTION(0x6, "spi1")),		/* MOSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "rtp"),		/* Y1 */
+		  SUNXI_FUNCTION(0x3, "pwm0"),		/* PWM0 */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* IN */
+		  SUNXI_FUNCTION(0x5, "uart1"),		/* RX */
+		  SUNXI_FUNCTION(0x6, "spi1")),		/* MOSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "rtp"),		/* Y2 */
+		  SUNXI_FUNCTION(0x3, "ir0"),		/* RX */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* OUT */
+		  SUNXI_FUNCTION(0x5, "uart1"),		/* TX */
+		  SUNXI_FUNCTION(0x6, "spi1")),		/* MISO */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "dram"),		/* DQS0 */
+		  SUNXI_FUNCTION(0x3, "i2c1"),		/* SCK */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* BCLK */
+		  SUNXI_FUNCTION(0x5, "uart1"),		/* RTS */
+		  SUNXI_FUNCTION(0x6, "spi1")),		/* CS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "dram"),		/* DQS1 */
+		  SUNXI_FUNCTION(0x3, "i2c1"),		/* SDA */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* LRCK */
+		  SUNXI_FUNCTION(0x5, "uart1"),		/* CTS */
+		  SUNXI_FUNCTION(0x6, "spi1")),		/* MOSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "dram"),		/* CKE */
+		  SUNXI_FUNCTION(0x3, "pwm0"),		/* PWM0 */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* IN */
+		  SUNXI_FUNCTION(0x5, "uart1"),		/* RX */
+		  SUNXI_FUNCTION(0x6, "spi1")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "dram"),		/* DDR_REF_D */
+		  SUNXI_FUNCTION(0x3, "ir0"),		/* RX */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* OUT */
+		  SUNXI_FUNCTION(0x5, "uart1"),		/* TX */
+		  SUNXI_FUNCTION(0x6, "spi1")),		/* MISO */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi0"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "mmc1")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi0"),		/* CS */
+		  SUNXI_FUNCTION(0x3, "mmc1")),		/* CMD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi0"),		/* MISO */
+		  SUNXI_FUNCTION(0x3, "mmc1")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi0"),		/* MOSI */
+		  SUNXI_FUNCTION(0x3, "uart0")),	/* TX */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "i2c0"),		/* SDA */
+		  SUNXI_FUNCTION(0x4, "rsb"),		/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "uart1"),		/* RTS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D4*/
+		  SUNXI_FUNCTION(0x3, "uart1"),		/* CTS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D5 */
+		  SUNXI_FUNCTION(0x3, "uart1"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D6 */
+		  SUNXI_FUNCTION(0x3, "uart1"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D7 */
+		  SUNXI_FUNCTION(0x3, "i2c1"),		/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D10 */
+		  SUNXI_FUNCTION(0x3, "i2c1"),		/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D11 */
+		  SUNXI_FUNCTION(0x3, "i2s"),		/* MCLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D12 */
+		  SUNXI_FUNCTION(0x3, "i2s"),		/* BCLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D13 */
+		  SUNXI_FUNCTION(0x3, "i2s"),		/* LRCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 10),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D14 */
+		  SUNXI_FUNCTION(0x3, "i2s"),		/* IN */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 11),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D15 */
+		  SUNXI_FUNCTION(0x3, "i2s"),		/* OUT */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 12),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D18 */
+		  SUNXI_FUNCTION(0x3, "i2c0"),		/* SCK */
+		  SUNXI_FUNCTION(0x4, "rsb"),		/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 12)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 13),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D19 */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 13)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 14),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D20 */
+		  SUNXI_FUNCTION(0x3, "lvds1"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D21 */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* RTS */
+		  SUNXI_FUNCTION(0x4, "i2c2"),		/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 15)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 16),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D22 */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* CTS */
+		  SUNXI_FUNCTION(0x4, "i2c2"),		/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 16)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 17),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* D23 */
+		  SUNXI_FUNCTION(0x3, "spdif"),		/* OUT */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 17)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 18),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "spi0"),		/* CS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 18)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 19),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* DE */
+		  SUNXI_FUNCTION(0x3, "spi0"),		/* MOSI */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 19)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 20),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* HYSNC */
+		  SUNXI_FUNCTION(0x3, "spi0"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 20)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 21),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd"),		/* VSYNC */
+		  SUNXI_FUNCTION(0x3, "spi0"),		/* MISO */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 21)),
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* HSYNC */
+		  SUNXI_FUNCTION(0x3, "lcd"),		/* D0 */
+		  SUNXI_FUNCTION(0x4, "i2c2"),		/* SCK */
+		  SUNXI_FUNCTION(0x5, "uart0"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* VSYNC */
+		  SUNXI_FUNCTION(0x3, "lcd"),		/* D1 */
+		  SUNXI_FUNCTION(0x4, "i2c2"),		/* SDA */
+		  SUNXI_FUNCTION(0x5, "uart0"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* PCLK */
+		  SUNXI_FUNCTION(0x3, "lcd"),		/* D8 */
+		  SUNXI_FUNCTION(0x4, "clk"),		/* OUT */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "lcd"),		/* D9 */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* BCLK */
+		  SUNXI_FUNCTION(0x5, "rsb"),		/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D1 */
+		  SUNXI_FUNCTION(0x3, "lcd"),		/* D16 */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* LRCK */
+		  SUNXI_FUNCTION(0x5, "rsb"),		/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "lcd"),		/* D17 */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* IN */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 5)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "pwm1"),		/* PWM1 */
+		  SUNXI_FUNCTION(0x4, "i2s"),		/* OUT */
+		  SUNXI_FUNCTION(0x5, "spdif"),		/* OUT */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 6)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D4 */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* TX */
+		  SUNXI_FUNCTION(0x4, "spi1"),		/* CS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 7)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D5 */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* RX */
+		  SUNXI_FUNCTION(0x4, "spi1"),		/* MOSI */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 8)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D6 */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* RTS */
+		  SUNXI_FUNCTION(0x4, "spi1"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 9)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 10),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D7 */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* CTS */
+		  SUNXI_FUNCTION(0x4, "spi1"),		/* MISO */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 10)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 11),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "clk0"),		/* OUT */
+		  SUNXI_FUNCTION(0x3, "i2c0"),		/* SCK */
+		  SUNXI_FUNCTION(0x4, "ir"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 11)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 12),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* MCLK */
+		  SUNXI_FUNCTION(0x3, "i2c0"),		/* SDA */
+		  SUNXI_FUNCTION(0x4, "pwm0"),		/* PWM0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 12)),
+
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D1 */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* MS */
+		  SUNXI_FUNCTION(0x4, "ir0"),		/* MS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "dgb0"),		/* DI */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "uart0"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* CMD */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* DO */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "uart0"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* CK */
+		  SUNXI_FUNCTION(0x4, "pwm1"),		/* PWM1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 5)),
+};
+
+static const struct sunxi_pinctrl_desc suniv_f1c100s_pinctrl_data = {
+	.pins = suniv_f1c100s_pins,
+	.npins = ARRAY_SIZE(suniv_f1c100s_pins),
+	.irq_banks = 3,
+	.disable_strict_mode = true,
+};
+
+static int suniv_pinctrl_probe(struct platform_device *pdev)
+{
+	return sunxi_pinctrl_init(pdev,
+				  &suniv_f1c100s_pinctrl_data);
+}
+
+static const struct of_device_id suniv_f1c100s_pinctrl_match[] = {
+	{ .compatible = "allwinner,suniv-f1c100s-pinctrl", },
+	{}
+};
+
+static struct platform_driver suniv_f1c100s_pinctrl_driver = {
+	.probe	= suniv_pinctrl_probe,
+	.driver	= {
+		.name		= "suniv-f1c100s-pinctrl",
+		.of_match_table	= suniv_f1c100s_pinctrl_match,
+	},
+};
+builtin_platform_driver(suniv_f1c100s_pinctrl_driver);
-- 
2.7.4

[RFC PATCH v2 11/14] dt-bindings: clock: Add Allwinner suniv F1C100s CCU

[Mesih Kilinc]

Add compatiple string for Allwinner suniv F1C100s CCU.
Add clock and reset definitions.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 .../devicetree/bindings/clock/sunxi-ccu.txt        |  1 +
 include/dt-bindings/clock/suniv-ccu-f1c100s.h      | 69 ++++++++++++++++++++++
 include/dt-bindings/reset/suniv-ccu-f1c100s.h      | 37 ++++++++++++
 3 files changed, 107 insertions(+)
 create mode 100644 include/dt-bindings/clock/suniv-ccu-f1c100s.h
 create mode 100644 include/dt-bindings/reset/suniv-ccu-f1c100s.h

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 47d2e90..92c16eb 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -3,6 +3,7 @@ Allwinner Clock Control Unit Binding
 
 Required properties :
 - compatible: must contain one of the following compatibles:
+		- "allwinner,suniv-f1c100s-ccu"
 		- "allwinner,sun4i-a10-ccu"
 		- "allwinner,sun5i-a10s-ccu"
 		- "allwinner,sun5i-a13-ccu"
diff --git a/include/dt-bindings/clock/suniv-ccu-f1c100s.h b/include/dt-bindings/clock/suniv-ccu-f1c100s.h
new file mode 100644
index 0000000..56f6d0d
--- /dev/null
+++ b/include/dt-bindings/clock/suniv-ccu-f1c100s.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2018 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUNIV_F1C100S_H_
+#define _DT_BINDINGS_CLK_SUNIV_F1C100S_H_
+
+#define CLK_CPU			11
+
+#define CLK_BUS_MMC0		14
+#define CLK_BUS_MMC1		15
+#define CLK_BUS_DRAM		16
+#define CLK_BUS_SPI0		17
+#define CLK_BUS_SPI1		18
+#define CLK_BUS_OTG		19
+#define CLK_BUS_VE		20
+#define CLK_BUS_LCD		21
+#define CLK_BUS_DEINTERLACE	22
+#define CLK_BUS_CSI		23
+#define CLK_BUS_TVD		24
+#define CLK_BUS_TVE		25
+#define CLK_BUS_DE_BE		26
+#define CLK_BUS_DE_FE		27
+#define CLK_BUS_CODEC		28
+#define CLK_BUS_SPDIF		29
+#define CLK_BUS_IR		30
+#define CLK_BUS_RSB		31
+#define CLK_BUS_I2S0		32
+#define CLK_BUS_I2C0		33
+#define CLK_BUS_I2C1		34
+#define CLK_BUS_I2C2		35
+#define CLK_BUS_PIO		36
+#define CLK_BUS_UART0		37
+#define CLK_BUS_UART1		38
+#define CLK_BUS_UART2		39
+
+#define CLK_MMC0		40
+#define CLK_MMC0_SAMPLE		41
+#define CLK_MMC0_OUTPUT		42
+#define CLK_MMC1		43
+#define CLK_MMC1_SAMPLE		44
+#define CLK_MMC1_OUTPUT		45
+#define CLK_I2S			46
+#define CLK_SPDIF		47
+
+#define CLK_USB_PHY0		48
+
+#define CLK_DRAM_VE		49
+#define CLK_DRAM_CSI		50
+#define CLK_DRAM_DEINTERLACE	51
+#define CLK_DRAM_TVD		52
+#define CLK_DRAM_DE_FE		53
+#define CLK_DRAM_DE_BE		54
+
+#define CLK_DE_BE		55
+#define CLK_DE_FE		56
+#define CLK_TCON		57
+#define CLK_DEINTERLACE		58
+#define CLK_TVE2_CLK		59
+#define CLK_TVE1_CLK		60
+#define CLK_TVD			61
+#define CLK_CSI			62
+#define CLK_VE			63
+#define CLK_CODEC		64
+#define CLK_AVS			65
+
+#endif
diff --git a/include/dt-bindings/reset/suniv-ccu-f1c100s.h b/include/dt-bindings/reset/suniv-ccu-f1c100s.h
new file mode 100644
index 0000000..95f1ed0
--- /dev/null
+++ b/include/dt-bindings/reset/suniv-ccu-f1c100s.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2018 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#ifndef _DT_BINDINGS_RST_SUNIV_F1C100S_H_
+#define _DT_BINDINGS_RST_SUNIV_F1C100S_H_
+
+#define RST_USB_PHY0		0
+#define RST_BUS_MMC0		1
+#define RST_BUS_MMC1		2
+#define RST_BUS_DRAM		3
+#define RST_BUS_SPI0		4
+#define RST_BUS_SPI1		5
+#define RST_BUS_OTG		6
+#define RST_BUS_VE		7
+#define RST_BUS_LCD		8
+#define RST_BUS_DEINTERLACE		9
+#define RST_BUS_CSI		10
+#define RST_BUS_TVD		11
+#define RST_BUS_TVE		12
+#define RST_BUS_DE_BE		13
+#define RST_BUS_DE_FE		14
+#define RST_BUS_CODEC		15
+#define RST_BUS_SPDIF		16
+#define RST_BUS_IR		17
+#define RST_BUS_RSB		18
+#define RST_BUS_I2S0		19
+#define RST_BUS_I2C0		20
+#define RST_BUS_I2C1		21
+#define RST_BUS_I2C2		22
+#define RST_BUS_UART0		23
+#define RST_BUS_UART1		24
+#define RST_BUS_UART2		25
+
+#endif /* _DT_BINDINGS_RST_SUNIV_F1C100S_H_ */
-- 
2.7.4

[RFC PATCH v2 12/14] clk: sunxi-ng: add support for suniv F1C100s SoC

[Mesih Kilinc]

The suniv F1C100s SoC (the chip in some new F-series products of
Allwinner)
has a CCU which seems to be a stripped version of the CCU in SoCs after
sun6i.

Add support for the CCU.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 drivers/clk/sunxi-ng/Kconfig             |   5 +
 drivers/clk/sunxi-ng/Makefile            |   1 +
 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c | 536 +++++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h |  34 ++
 4 files changed, 576 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 826674d..429ea4a 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -6,6 +6,11 @@ config SUNXI_CCU
 
 if SUNXI_CCU
 
+config SUNIV_F1C100S_CCU
+	bool "Support for the Allwinner newer F1C100s CCU"
+	default MACH_SUNIV
+	depends on MACH_SUNIV || COMPILE_TEST
+
 config SUN50I_A64_CCU
 	bool "Support for the Allwinner A64 CCU"
 	default ARM64 && ARCH_SUNXI
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 4945470..4c7bee8 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@ obj-y				+= ccu_nm.o
 obj-y				+= ccu_mp.o
 
 # SoC support
+obj-$(CONFIG_SUNIV_F1C100S_CCU)	+= ccu-suniv-f1c100s.o
 obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
 obj-$(CONFIG_SUN50I_H6_CCU)	+= ccu-sun50i-h6.o
 obj-$(CONFIG_SUN50I_H6_R_CCU)	+= ccu-sun50i-h6-r.o
diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
new file mode 100644
index 0000000..d933dba
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-suniv-f1c100s.h"
+
+static struct ccu_nkmp pll_cpu_clk = {
+	.enable = BIT(31),
+	.lock	= BIT(28),
+
+	.n	= _SUNXI_CCU_MULT(8, 5),
+	.k	= _SUNXI_CCU_MULT(4, 2),
+	.m	= _SUNXI_CCU_DIV(0, 2),
+	/* MAX is guessed by the BSP table */
+	.p	= _SUNXI_CCU_DIV_MAX(16, 2, 4),
+
+	.common	= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-cpu", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUNIV_PLL_AUDIO_REG	0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				   "osc24M", 0x008,
+				   8, 7,		/* N */
+				   0, 5,		/* M */
+				   BIT(31),		/* gate */
+				   BIT(28),		/* lock */
+				   CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+					"osc24M", 0x010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr",
+				    "osc24M", 0x020,
+				    8, 5,		/* N */
+				    4, 2,		/* K */
+				    0, 2,		/* M */
+				    BIT(31),		/* gate */
+				    BIT(28),		/* lock */
+				    CLK_IS_CRITICAL);
+
+static struct ccu_nk pll_periph_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.n		= _SUNXI_CCU_MULT(8, 5),
+	.common		= {
+		.reg		= 0x028,
+		.hw.init	= CLK_HW_INIT("pll-periph", "osc24M",
+					      &ccu_nk_ops, 0),
+	},
+};
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+					     "pll-cpu", "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL | CLK_SET_RATE_PARENT);
+
+static const char * const ahb_parents[] = { "osc32k", "osc24M",
+					    "cpu", "pll-periph" };
+static const struct ccu_mux_var_prediv ahb_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
+static struct ccu_div ahb_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.var_predivs	= ahb_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb",
+						      ahb_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb_clk, "apb", "ahb",
+			   0x054, 8, 2, apb_div_table, 0);
+
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk,	"bus-spi1",	"ahb",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb",
+		      0x060, BIT(24), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_lcd_clk,	"bus-lcd",	"ahb",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_deinterlace_clk,	"bus-deinterlace",	"ahb",
+		      0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi_clk,	"bus-csi",	"ahb",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_tvd_clk,	"bus-tvd",	"ahb",
+		      0x064, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_tve_clk,	"bus-tve",	"ahb",
+		      0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_de_be_clk,	"bus-de-be",	"ahb",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_de_fe_clk,	"bus-de-fe",	"ahb",
+		      0x064, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk,	"bus-spdif",	"apb",
+		      0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ir_clk,	"bus-ir",	"apb",
+		      0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_rsb_clk,	"bus-rsb",	"apb",
+		      0x068, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk,	"bus-i2s0",	"apb",
+		      0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb",
+		      0x068, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb",
+		      0x068, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk,	"bus-i2c2",	"apb",
+		      0x068, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb",
+		      0x068, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb",
+		      0x068, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb",
+		      0x068, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb",
+		      0x068, BIT(22), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+
+static const char * const i2s_spdif_parents[] = { "pll-audio-8x",
+						  "pll-audio-4x",
+						  "pll-audio-2x",
+						  "pll-audio" };
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s_clk, "i2s", i2s_spdif_parents,
+			       0x0b0, 16, 2, BIT(31), 0);
+
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_spdif_parents,
+			       0x0b4, 16, 2, BIT(31), 0);
+
+/* The BSP header file has a CIR_CFG, but no mod clock uses this definition */
+
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"pll-ddr",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk,	"dram-csi",	"pll-ddr",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_deinterlace_clk,	"dram-deinterlace",
+		      "pll-ddr", 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk,	"dram-tvd",	"pll-ddr",
+		      0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_de_fe_clk,	"dram-de-fe",	"pll-ddr",
+		      0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_be_clk,	"dram-de-be",	"pll-ddr",
+		      0x100, BIT(26), 0);
+
+static const char * const de_parents[] = { "pll-video", "pll-periph" };
+static const u8 de_table[] = { 0, 2, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_be_clk, "de-be",
+				       de_parents, de_table,
+				       0x104, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_fe_clk, "de-fe",
+				       de_parents, de_table,
+				       0x10c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video", "pll-video-2x" };
+static const u8 tcon_table[] = { 0, 2, };
+static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon_clk, "tcon",
+				     tcon_parents, tcon_table,
+				     0x118, 24, 3, BIT(31),
+				     CLK_SET_RATE_PARENT);
+
+static const char * const deinterlace_parents[] = { "pll-video",
+						    "pll-video-2x" };
+static const u8 deinterlace_table[] = { 0, 2, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(deinterlace_clk, "deinterlace",
+				       deinterlace_parents, deinterlace_table,
+				       0x11c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tve_clk2_parents[] = { "pll-video",
+						 "pll-video-2x" };
+static const u8 tve_clk2_table[] = { 0, 2, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(tve_clk2_clk, "tve-clk2",
+				       tve_clk2_parents, tve_clk2_table,
+				       0x120, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_GATE(tve_clk1_clk, "tve-clk1", "tve-clk2",
+			     0x120, 8, 1, BIT(15), 0);
+
+static const char * const tvd_parents[] = { "pll-video", "osc24M",
+					    "pll-video-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd_clk, "tvd", tvd_parents,
+				 0x124, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_parents[] = { "pll-video", "osc24M" };
+static const u8 csi_table[] = { 0, 5, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_clk, "csi", csi_parents, csi_table,
+				       0x120, 0, 4, 8, 3, BIT(15), 0);
+
+/*
+ * TODO: BSP says the parent is pll-audio, however common sense and experience
+ * told us it should be pll-ve. pll-ve is totally not used in BSP code.
+ */
+static SUNXI_CCU_GATE(ve_clk, "ve", "pll-audio", 0x13c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio", 0x140, BIT(31), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x144, BIT(31), 0);
+
+static struct ccu_common *suniv_ccu_clks[] = {
+	&pll_cpu_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr0_clk.common,
+	&pll_periph_clk.common,
+	&cpu_clk.common,
+	&ahb_clk.common,
+	&apb_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_dram_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_otg_clk.common,
+	&bus_ve_clk.common,
+	&bus_lcd_clk.common,
+	&bus_deinterlace_clk.common,
+	&bus_csi_clk.common,
+	&bus_tve_clk.common,
+	&bus_tvd_clk.common,
+	&bus_de_be_clk.common,
+	&bus_de_fe_clk.common,
+	&bus_codec_clk.common,
+	&bus_spdif_clk.common,
+	&bus_ir_clk.common,
+	&bus_rsb_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_pio_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&mmc0_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc0_output_clk.common,
+	&mmc1_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc1_output_clk.common,
+	&i2s_clk.common,
+	&spdif_clk.common,
+	&usb_phy0_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi_clk.common,
+	&dram_deinterlace_clk.common,
+	&dram_tvd_clk.common,
+	&dram_de_fe_clk.common,
+	&dram_de_be_clk.common,
+	&de_be_clk.common,
+	&de_fe_clk.common,
+	&tcon_clk.common,
+	&deinterlace_clk.common,
+	&tve_clk2_clk.common,
+	&tve_clk1_clk.common,
+	&tvd_clk.common,
+	&csi_clk.common,
+	&ve_clk.common,
+	&codec_clk.common,
+	&avs_clk.common,
+};
+
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video_2x_clk, "pll-video-2x",
+			"pll-video", 1, 2, 0);
+
+static struct clk_hw_onecell_data suniv_hw_clks = {
+	.hws	= {
+		[CLK_PLL_CPU]		= &pll_cpu_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO]		= &pll_video_clk.common.hw,
+		[CLK_PLL_VIDEO_2X]	= &pll_video_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AHB]		= &ahb_clk.common.hw,
+		[CLK_APB]		= &apb_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_LCD]		= &bus_lcd_clk.common.hw,
+		[CLK_BUS_DEINTERLACE]	= &bus_deinterlace_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_BUS_TVD]		= &bus_tvd_clk.common.hw,
+		[CLK_BUS_TVE]		= &bus_tve_clk.common.hw,
+		[CLK_BUS_DE_BE]		= &bus_de_be_clk.common.hw,
+		[CLK_BUS_DE_FE]		= &bus_de_fe_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_BUS_IR]		= &bus_ir_clk.common.hw,
+		[CLK_BUS_RSB]		= &bus_rsb_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_I2S]		= &i2s_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
+		[CLK_DRAM_DEINTERLACE]	= &dram_deinterlace_clk.common.hw,
+		[CLK_DRAM_TVD]		= &dram_tvd_clk.common.hw,
+		[CLK_DRAM_DE_FE]	= &dram_de_fe_clk.common.hw,
+		[CLK_DRAM_DE_BE]	= &dram_de_be_clk.common.hw,
+		[CLK_DE_BE]		= &de_be_clk.common.hw,
+		[CLK_DE_FE]		= &de_fe_clk.common.hw,
+		[CLK_TCON]		= &tcon_clk.common.hw,
+		[CLK_DEINTERLACE]	= &deinterlace_clk.common.hw,
+		[CLK_TVE2_CLK]		= &tve_clk2_clk.common.hw,
+		[CLK_TVE1_CLK]		= &tve_clk1_clk.common.hw,
+		[CLK_TVD]		= &tvd_clk.common.hw,
+		[CLK_CSI]		= &csi_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_CODEC]		= &codec_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map suniv_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_SPI1]		=  { 0x2c0, BIT(21) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(24) },
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_LCD]		=  { 0x2c4, BIT(4) },
+	[RST_BUS_DEINTERLACE]	=  { 0x2c4, BIT(5) },
+	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_TVD]		=  { 0x2c4, BIT(9) },
+	[RST_BUS_TVE]		=  { 0x2c4, BIT(10) },
+	[RST_BUS_DE_BE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_DE_FE]		=  { 0x2c4, BIT(14) },
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+	[RST_BUS_SPDIF]		=  { 0x2d0, BIT(1) },
+	[RST_BUS_IR]		=  { 0x2d0, BIT(2) },
+	[RST_BUS_RSB]		=  { 0x2d0, BIT(3) },
+	[RST_BUS_I2S0]		=  { 0x2d0, BIT(12) },
+	[RST_BUS_I2C0]		=  { 0x2d0, BIT(16) },
+	[RST_BUS_I2C1]		=  { 0x2d0, BIT(17) },
+	[RST_BUS_I2C2]		=  { 0x2d0, BIT(18) },
+	[RST_BUS_UART0]		=  { 0x2d0, BIT(20) },
+	[RST_BUS_UART1]		=  { 0x2d0, BIT(21) },
+	[RST_BUS_UART2]		=  { 0x2d0, BIT(22) },
+};
+
+static const struct sunxi_ccu_desc suniv_ccu_desc = {
+	.ccu_clks	= suniv_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(suniv_ccu_clks),
+
+	.hw_clks	= &suniv_hw_clks,
+
+	.resets		= suniv_ccu_resets,
+	.num_resets	= ARRAY_SIZE(suniv_ccu_resets),
+};
+
+static struct ccu_pll_nb suniv_pll_cpu_nb = {
+	.common	= &pll_cpu_clk.common,
+	/* copy from pll_cpu_clk */
+	.enable	= BIT(31),
+	.lock	= BIT(28),
+};
+
+static struct ccu_mux_nb suniv_cpu_nb = {
+	.common		= &cpu_clk.common,
+	.cm		= &cpu_clk.mux,
+	.delay_us	= 1, /* > 8 clock cycles at 24 MHz */
+	.bypass_index	= 1, /* index of 24 MHz oscillator */
+};
+
+static void __init suniv_f1c100s_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%pOF: Could not map the clock registers\n", node);
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUNIV_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUNIV_PLL_AUDIO_REG);
+
+	sunxi_ccu_probe(node, reg, &suniv_ccu_desc);
+
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&suniv_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
+	ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
+				  &suniv_cpu_nb);
+}
+CLK_OF_DECLARE(suniv_f1c100s_ccu, "allwinner,suniv-f1c100s-ccu",
+	       suniv_f1c100s_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
new file mode 100644
index 0000000..1da687a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CCU_SUNIV_F1C100S_H_
+#define _CCU_SUNIV_F1C100S_H_
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
+#define CLK_PLL_CPU		0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_AUDIO_2X	3
+#define CLK_PLL_AUDIO_4X	4
+#define CLK_PLL_AUDIO_8X	5
+#define CLK_PLL_VIDEO		6
+#define CLK_PLL_VIDEO_2X	7
+#define CLK_PLL_VE		8
+#define CLK_PLL_DDR0		9
+#define CLK_PLL_PERIPH		10
+
+/* CPU clock is exported */
+
+#define CLK_AHB			12
+#define CLK_APB			13
+
+/* All bus gates, DRAM gates and mod clocks are exported */
+
+#define CLK_NUMBER		(CLK_AVS + 1)
+
+#endif /* _CCU_SUNIV_F1C100S_H_ */
-- 
2.7.4

[RFC PATCH v2 13/14] ARM: dts: suniv: add initial DTSI file for F1C100s

[Mesih Kilinc]

F1C100s is one product with the suniv die, which has a 32MiB co-packaged
DDR1 DRAM chip. As we have the support for suniv pin controller and CCU now, add a
initial DTSI for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Mesih Kilinc <mesihkilnc@gmail.com>
---
 arch/arm/boot/dts/suniv-f1c100s.dtsi | 158 +++++++++++++++++++++++++++++++++++
 1 file changed, 158 insertions(+)
 create mode 100644 arch/arm/boot/dts/suniv-f1c100s.dtsi

diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
new file mode 100644
index 0000000..d98f658
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
+ */
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		fake100M: clk-100M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+			clock-output-names = "fake-100M";
+		};
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller at 1c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_d: sram at 10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section at 0 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		ccu: clock at 1c20000 {
+			compatible = "allwinner,suniv-f1c100s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller at 1c20400 {
+			compatible = "allwinner,suniv-f1c100s-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl at 1c20800 {
+			compatible = "allwinner,suniv-f1c100s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <38>, <39>, <40>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart-pins-pe {
+				pins = "PE0", "PE1";
+				function = "uart0";
+			};
+		};
+
+		timer at 1c20c00 {
+			compatible = "allwinner,suniv-f1c100s-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <13>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog at 1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+		};
+
+		uart0: serial at 1c25000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial at 1c25400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial at 1c25800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+	};
+};
-- 
2.7.4

[RFC PATCH v2 14/14] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano

[Mesih Kilinc]

Lichee Pi Nano is a F1C100s board by Lichee Pi.

Add initial device tree for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 arch/arm/boot/dts/Makefile                        |  2 ++
 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 26 +++++++++++++++++++++++
 2 files changed, 28 insertions(+)
 create mode 100644 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b0e966d..2b96a5b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1066,6 +1066,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+	suniv-f1c100s-licheepi-nano.dtb
 dtb-$(CONFIG_ARCH_TANGO) += \
 	tango4-vantage-1172.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
new file mode 100644
index 0000000..6ae5ccc
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+/ {
+	model = "Lichee Pi Nano";
+	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
-- 
2.7.4

[RFC PATCH v2 01/14] ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7 Allwinner SoCs

[Maxime Ripard]

Hi,

On Sun, Nov 18, 2018 at 05:17:00PM +0300, Mesih Kilinc wrote:
> Allwinner also has some ARMv5 SoCs.
> 
> In order to add support for them, add a CONFIG_ARCH_SUNXI_V7 bool config
> which is selected when a ARMv7 soc is selected, and make CONFIG_ARCH_SUNXI
> a common option which is selected by both V7 and V5 sunxi option.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>

I'm not sure why Icenowy has her SoB here?

> ---
>  arch/arm/mach-sunxi/Kconfig  | 25 +++++++++++++++++--------
>  arch/arm/mach-sunxi/Makefile |  2 +-
>  2 files changed, 18 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index d9c8ecf..5db17ec 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -6,31 +6,38 @@ menuconfig ARCH_SUNXI
>  	select GENERIC_IRQ_CHIP
>  	select GPIOLIB
>  	select PINCTRL
> -	select PM_OPP
> -	select SUN4I_TIMER
>  	select RESET_CONTROLLER
> +	help
> +	  Support for Allwinner ARM-based family of processors
>  
>  if ARCH_SUNXI
>  
> +if ARCH_MULTI_V7
> +
> +config ARCH_SUNXI_V7
> +	bool
> +	select PM_OPP
> +	select SUN4I_TIMER
> +
>  config MACH_SUN4I
>  	bool "Allwinner A10 (sun4i) SoCs support"
> -	default ARCH_SUNXI
> +	select ARCH_SUNXI_V7

It changes the behaviour a bit. It used to be enabled by default, it
doesn't anymore.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181120/c4cd052e/attachment-0001.sig>

[RFC PATCH v2 03/14] ARM: sunxi: add Allwinner ARMv5 SoCs

[Maxime Ripard]

On Sun, Nov 18, 2018 at 05:17:02PM +0300, Mesih Kilinc wrote:
> Add option for Allwinner ARMv5 SoCs and SoC F1C100s (which has a die
> used for many new F-series products, including F1C100A, F1C100s, F1C200s,
> F1C500, F1C600).
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
> ---
>  arch/arm/mach-sunxi/Kconfig    | 14 +++++++++++++-
>  arch/arm/mach-sunxi/Makefile   |  1 +
>  arch/arm/mach-sunxi/sunxi_v5.c | 22 ++++++++++++++++++++++
>  3 files changed, 36 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/mach-sunxi/sunxi_v5.c
> 
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 5db17ec..066644c 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -1,6 +1,6 @@
>  menuconfig ARCH_SUNXI
>  	bool "Allwinner SoCs"
> -	depends on ARCH_MULTI_V7
> +	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
>  	select ARCH_HAS_RESET_CONTROLLER
>  	select CLKSRC_MMIO
>  	select GENERIC_IRQ_CHIP
> @@ -64,4 +64,16 @@ config ARCH_SUNXI_MC_SMP
>  
>  endif
>  
> +if ARCH_MULTI_V5
> +
> +config ARCH_SUNXI_V5
> +	bool
> +	select SUN4I_TIMER

If SUN4I_TIMER is needed both by the armv5 and armv7 cores, why did we
need to move it out of ARCH_SUNXI?

> +config MACH_SUNIV
> +	bool "Allwinner new F-series (suniv) SoCs support"

I would drop the "new" here.

> +++ b/arch/arm/mach-sunxi/sunxi_v5.c
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree support for Allwinner F series SoCs
> + *
> + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
> + * Copyright (C) 2018 Mesih Kilinc <mesihkilinc@gmail.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <asm/mach/arch.h>
> +
> +static const char * const suniv_board_dt_compat[] = {
> +	"allwinner,suniv-f1c100s",
> +	NULL,
> +};
> +
> +DT_MACHINE_START(SUNXI_DT, "Allwinner suniv Family")
> +	.dt_compat	= suniv_board_dt_compat,
> +MACHINE_END

Do we really need a separate file for that?

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181120/8fce95a1/attachment-0001.sig>

[RFC PATCH v2 04/14] dt-bindings: interrupt-controller: Add suniv interrupt-controller

[Maxime Ripard]

Hi,

On Sun, Nov 18, 2018 at 05:17:03PM +0300, Mesih Kilinc wrote:
> Add compatible string for Alwinner suniv F1C100s SoC interrupt
> controller which is stripped version of sun4i
> 
> Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
> ---
>  .../devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt  | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
> index b290ca1..e04ddb4 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
> +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
> @@ -2,7 +2,10 @@ Allwinner Sunxi Interrupt Controller
>  
>  Required properties:
>  
> -- compatible : should be "allwinner,sun4i-a10-ic"
> +- compatible: should be "allwinner,<soc-familiy>-<soc-name>-ic" to identify

There's no need to define the pattern, just list the compatibles
supported. Otherwise, you give the idea that all the combinations are
supported, and they aren't.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181120/e7506352/attachment-0001.sig>

[RFC PATCH v2 05/14] irqchip/sun4i: add support for suniv interrupt controller

[Maxime Ripard]

Hi,

On Sun, Nov 18, 2018 at 05:17:04PM +0300, Mesih Kilinc wrote:
> The new F-series SoCs (suniv) from Allwinner use an stripped version of
> the interrupt controller in A10/A13.
> 
> Add support for it in irq-sun4i driver.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
> ---
>  drivers/irqchip/irq-sun4i.c | 47 ++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 42 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c
> index e3e5b91..2abf662 100644
> --- a/drivers/irqchip/irq-sun4i.c
> +++ b/drivers/irqchip/irq-sun4i.c
> @@ -23,13 +23,26 @@
>  
>  #include <asm/exception.h>
>  
> +enum sun4i_irq_type {
> +	sun4i_ic,
> +	suniv_ic
> +};
> +
> +static enum sun4i_irq_type sun4i_irq_type;

You don't really need that type. It's completely redundant with the
compatible.

> +static int sun4i_irq_enable_reg_offset;
> +static int sun4i_irq_mask_reg_offset;

Ideally, this should be a structure so that we can easily extend it
without adding more and more global variables. And the type shouldn't
be signed.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181120/f43113d5/attachment-0001.sig>

[RFC PATCH v2 08/14] clocksource/drivers/sun4i: register as sched_clock on suniv

[Maxime Ripard]

On Sun, Nov 18, 2018 at 05:17:07PM +0300, Mesih Kilinc wrote:
> The suniv chip (newer F-series Allwinner SoCs) is based on ARM926EJ-S
> CPU, thus it has no architecture timer.
> 
> Register sun4i_timer as sched_clock on it.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>

This one should be squashed in the previous patch.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181120/b3c20907/attachment-0001.sig>

[RFC PATCH v2 11/14] dt-bindings: clock: Add Allwinner suniv F1C100s CCU

[Maxime Ripard]

On Sun, Nov 18, 2018 at 05:17:10PM +0300, Mesih Kilinc wrote:
> Add compatiple string for Allwinner suniv F1C100s CCU.
> Add clock and reset definitions.
> 
> Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
> ---
>  .../devicetree/bindings/clock/sunxi-ccu.txt        |  1 +
>  include/dt-bindings/clock/suniv-ccu-f1c100s.h      | 69 ++++++++++++++++++++++
>  include/dt-bindings/reset/suniv-ccu-f1c100s.h      | 37 ++++++++++++
>  3 files changed, 107 insertions(+)
>  create mode 100644 include/dt-bindings/clock/suniv-ccu-f1c100s.h
>  create mode 100644 include/dt-bindings/reset/suniv-ccu-f1c100s.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> index 47d2e90..92c16eb 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> @@ -3,6 +3,7 @@ Allwinner Clock Control Unit Binding
>  
>  Required properties :
>  - compatible: must contain one of the following compatibles:
> +		- "allwinner,suniv-f1c100s-ccu"

Letters come after the numbers in alphabetical order, so that should
be moved at the end of that list (and you have that issue in a couple
of other patches).

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181120/76b489e1/attachment.sig>

[RFC PATCH v2 13/14] ARM: dts: suniv: add initial DTSI file for F1C100s

[Maxime Ripard]

On Sun, Nov 18, 2018 at 05:17:12PM +0300, Mesih Kilinc wrote:
> F1C100s is one product with the suniv die, which has a 32MiB co-packaged
> DDR1 DRAM chip. As we have the support for suniv pin controller and CCU now, add a
> initial DTSI for it.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Mesih Kilinc <mesihkilnc@gmail.com>
> ---
>  arch/arm/boot/dts/suniv-f1c100s.dtsi | 158 +++++++++++++++++++++++++++++++++++
>  1 file changed, 158 insertions(+)
>  create mode 100644 arch/arm/boot/dts/suniv-f1c100s.dtsi
> 
> diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> new file mode 100644
> index 0000000..d98f658
> --- /dev/null
> +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> +/*
> + * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
> + * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
> + */
> +
> +#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
> +#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	interrupt-parent = <&intc>;
> +
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		osc24M: clk-24M {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <24000000>;
> +			clock-output-names = "osc24M";
> +		};
> +
> +		osc32k: clk-32k {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <32768>;
> +			clock-output-names = "osc32k";
> +		};
> +
> +		fake100M: clk-100M {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <100000000>;
> +			clock-output-names = "fake-100M";
> +		};

Why do you need that fake clock?

> +	};
> +
> +	cpus {
> +		#address-cells = <0>;
> +		#size-cells = <0>;
> +
> +		cpu {
> +			compatible = "arm,arm926ej-s";
> +			device_type = "cpu";
> +		};
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		sram-controller at 1c00000 {
> +			compatible = "allwinner,sun4i-a10-sram-controller";

You should have a compatible for that SoC there (possibly keeping the
A10 compatible if that makes sense).

> +			reg = <0x01c00000 0x30>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			sram_d: sram at 10000 {
> +				compatible = "mmio-sram";
> +				reg = <0x00010000 0x1000>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0 0x00010000 0x1000>;
> +
> +				otg_sram: sram-section at 0 {
> +					compatible = "allwinner,sun4i-a10-sram-d";

Ditto

> +					reg = <0x0000 0x1000>;
> +					status = "disabled";
> +				};
> +			};
> +		};
> +
> +		ccu: clock at 1c20000 {
> +			compatible = "allwinner,suniv-f1c100s-ccu";
> +			reg = <0x01c20000 0x400>;
> +			clocks = <&osc24M>, <&osc32k>;
> +			clock-names = "hosc", "losc";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		intc: interrupt-controller at 1c20400 {
> +			compatible = "allwinner,suniv-f1c100s-ic";
> +			reg = <0x01c20400 0x400>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +		};
> +
> +		pio: pinctrl at 1c20800 {
> +			compatible = "allwinner,suniv-f1c100s-pinctrl";
> +			reg = <0x01c20800 0x400>;
> +			interrupts = <38>, <39>, <40>;
> +			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
> +			clock-names = "apb", "hosc", "losc";
> +			gpio-controller;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			#gpio-cells = <3>;
> +
> +			uart0_pins_a: uart-pins-pe {
> +				pins = "PE0", "PE1";
> +				function = "uart0";
> +			};
> +		};
> +
> +		timer at 1c20c00 {
> +			compatible = "allwinner,suniv-f1c100s-timer";
> +			reg = <0x01c20c00 0x90>;
> +			interrupts = <13>;
> +			clocks = <&osc24M>;
> +		};
> +
> +		wdt: watchdog at 1c20ca0 {
> +			compatible = "allwinner,sun6i-a31-wdt";

Ditto.

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181120/05545ac8/attachment-0001.sig>

[RFC PATCH v2 00/14] initial support for "suniv" Allwinner new ARM9 SoC

[Maxime Ripard]

Hi,

On Sun, Nov 18, 2018 at 05:16:59PM +0300, Mesih Kilinc wrote:
> This is the second version of RFC patchset for Allwinner ARMv5 F1C100s
> SoC. Icenowy (author of the initial patchset) allowed me to continue.
> For patch 1~3 which introduces first ARMv5 Allwinner SoC I looked 
> freescale,imx configs and tried to organize patches better. 
> Addressed comment from Maxime Ripard and added SoC name to
> compatibles and filenames. 
> Addressed comment from Rob Herring and added dt-bindings.
> 
> This is my first patch. Sorry for any inconvenience :-)

Apart from the minor comments you'll find with each patches, you did
great :)

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181120/26925267/attachment-0001.sig>