From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Tue, 20 Nov 2018 11:55:57 +0100 Subject: [PATCH v4 03/26] clk: sunxi-ng: Add check for maximum rate to NKM PLLs In-Reply-To: References: <20181113111633.20189-1-jagan@amarulasolutions.com> <20181113111633.20189-4-jagan@amarulasolutions.com> <20181113132658.niwy6bqdqzaeqpv2@flea> Message-ID: <20181120105557.3mysirc3ga2h2334@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Nov 15, 2018 at 08:51:04PM +0530, Jagan Teki wrote: > > > drivers/clk/sunxi-ng/ccu_nkm.c | 3 +++ > > > drivers/clk/sunxi-ng/ccu_nkm.h | 1 + > > > 2 files changed, 4 insertions(+) > > > > > > diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c > > > index 6b5ad990f802..b8b66cdd30bf 100644 > > > --- a/drivers/clk/sunxi-ng/ccu_nkm.c > > > +++ b/drivers/clk/sunxi-ng/ccu_nkm.c > > > @@ -128,6 +128,9 @@ static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux, > > > if (rate < nkm->min_rate) > > > return nkm->min_rate; > > > > > > + if (nkm->max_rate && rate > nkm->max_rate) > > > + return nkm->max_rate; > > > + > > > > I would expect the test to be the same for the minimum and maximum cases. > > I don't have proper use-case for max rate test, I do verify by using > higher the rate on dclock, but nor sure. May be I can skip the > max_rate patch? So you're sending more patches that you haven't really tested? Why are you sending them then? > Apart from this, any idea about this issue where SUN4I_TCON0_DCLK_REG > will only work with div upto 6 on A64 DSI panels[1], did you find the > same issue on A33? IIRC my panel was falling into the case where the divider was 4, so I've not fallen into that case. > With parent rate 330MHz, the resulting tcon divider for 30MHz [2] > clock is 11 and for the same for 55MHz [3] clock is 6. I'm not sure what the question is? Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 228 bytes Desc: not available URL: