From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Thu, 22 Nov 2018 09:19:09 +0100 Subject: [PATCH v1 1/2] ARM: dts: sun8i: Add board dts file for t3-cqa3t-bv3. In-Reply-To: <20181121154356.GA4359@arx-s1> References: <20181121154356.GA4359@arx-s1> Message-ID: <20181122081909.2u3kt3ih5ma2dl2y@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Nov 21, 2018 at 11:43:57PM +0800, Hao Zhang wrote: > The T3/R40/V40 using the same sdk and config file in allwinner > sdk, it seem they are the same SOC just with different name, so > compatible with R40. > > The t3-cqa3t-bv3 based on Allwinner T3 SoC, it has various connectors, > leds, buttons, and sell on: > https://item.taobao.com/item.htm?spm=2013.1.w4023-4203040713.25.62704cce7UCgLS&id=557154455330 > > It features: > - X-Powers AXP221s PMIC connected to i2c0 > - 1/2 GB DDR3 DRAM > - 8 GB eMMC > - 2x USB 2.0 hosts > - 1x USB 2.0 OTG > - 2 LVDS connectors > - 24 bit RGB LCD connector > - HDMI output > - DVP camera interface (support 500w cmos camera) > - GPIO connectors > - 5 TTL uarts and 2 RS232 uarts > - 1 RS485 connector > - support i2c capacitive tp and usb infrared tp > - boot control, reset and user buttons > - 3.5mm headphone and 3.5mm mic jack > - 100M RJ45 > - micro SD card slot > - DC power jack > - RCT power slot > - 1 CVBS TVIN > - 1 CVBS TVOUT > - 2 customer leds > - 1 buzzer > - 1 minipcie > - I2C output > - SPI output > - PCM output > - wifi and bt connector reserved. > > Board info can find here: > https://github.com/Axl-zhang/Allwinner-V40-T3-R40-manual > > Signed-off-by: Hao Zhang Applied both patches, thanks! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 228 bytes Desc: not available URL: