[RFC PATCH v3 01/17] ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7 Allwinner SoCs

[maxime.ripard@bootlin.com (Maxime Ripard)]

On Wed, Nov 21, 2018 at 09:30:34PM +0300, Mesih Kilinc wrote:
> Allwinner also has some ARMv5 SoCs.
> 
> In order to add support for them, add a CONFIG_ARCH_SUNXI_V7 bool config
> which is selected when a ARMv7 soc is selected, and make CONFIG_ARCH_SUNXI
> a common option which is selected by both V7 and V5 sunxi option.
> 
> Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
> ---
>  arch/arm/mach-sunxi/Kconfig | 23 ++++++++++++++++-------
>  1 file changed, 16 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index d9c8ecf..7e5f173 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -6,31 +6,38 @@ menuconfig ARCH_SUNXI
>  	select GENERIC_IRQ_CHIP
>  	select GPIOLIB
>  	select PINCTRL
> -	select PM_OPP
>  	select SUN4I_TIMER
>  	select RESET_CONTROLLER
> +	help
> +	  Support for Allwinner ARM-based family of processors
>  
>  if ARCH_SUNXI
>  
> +if ARCH_MULTI_V7
> +
> +config ARCH_SUNXI_V7
> +	bool
> +	select PM_OPP
> +

Actually, thinking more about this, I don't see why the PM_OPP config
option should be made specific to the ARMv7 sunxi SoCs, you will have
things cpufreq enabled at some point as well on the armv5 support.

>  config MACH_SUN4I
>  	bool "Allwinner A10 (sun4i) SoCs support"
> -	default ARCH_SUNXI
> +	select ARCH_SUNXI_V7

The option is still changed from being on by default to being off by
default. This breaks all the defconfig, and we really shouldn't change
that.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181122/0390c8e4/attachment.sig>