From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Tue, 27 Nov 2018 10:47:30 +0100 Subject: [PATCH 10/14] regulator: dts: set proper lradc vref on OLinuXino Lime2 In-Reply-To: References: <20181127093735.amfqfcsxzreajte4@flea> Message-ID: <20181127094730.dewrb5ri6uyebl2e@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Nov 27, 2018 at 05:41:10PM +0800, Chen-Yu Tsai wrote: > On Tue, Nov 27, 2018 at 5:37 PM Maxime Ripard wrote: > > > > On Mon, Nov 26, 2018 at 05:27:51PM +0200, Priit Laes wrote: > > > From: Olliver Schinagl > > > > > > The lradc's analog reference voltage is set to 3.0 volt in the > > > hardware. This is more or less set in copper for at least lradc0. Set the > > > property in the dts to ensure the lradc is referenced properly. > > > > > > Signed-off-by: Olliver Schinagl > > > Signed-off-by: Priit Laes > > > > I'm not sure why that patch is part of this series, but I applied > > it. Thanks! > > Please help fix up the subject. Should read > > "ARM: dts: sun7i: set proper lradc vref on OLinuXino Lime2" > > or > > "ARM: dts: sun7i: olinoxino-lime2: set proper lradc vref" Yes, I've noticed it while applying, and this is already fixed :) Thanks for the reminder! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 228 bytes Desc: not available URL: