public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Priit Laes <plaes@plaes.org>
To: Mesih Kilinc <mesihkilinc@gmail.com>
Cc: devicetree@vger.kernel.org, Marc Zyngier <marc.zyngier@arm.com>,
	Julian Calaby <julian.calaby@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	linux-kernel@vger.kernel.org,
	Russell King <linux@armlinux.org.uk>,
	linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com,
	Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <maxime.ripard@free-electrons.com>,
	Chen-Yu Tsai <wens@csie.org>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Icenowy Zheng <icenowy@aosc.io>
Subject: Re: [linux-sunxi] [PATCH v5 00/17] initial support for "suniv" Allwinner new ARM9 SoC
Date: Thu, 29 Nov 2018 21:47:30 +0000	[thread overview]
Message-ID: <20181129214730.6d6aju4jurai6rmv@plaes.org> (raw)
In-Reply-To: <cover.1543443475.git.mesihkilinc@gmail.com>

On Thu, Nov 29, 2018 at 01:33:10AM +0300, Mesih Kilinc wrote:
> This is the fifth version of patchset for Allwinner ARMv5 F1C100s
> SoC. Addressed comments from Maxime Ripard and Rob Herring, added signatures.

IIRC, the original author of these patches was Icenowy, what happened to this?
> 
> Changes since v4:
> - Patch "dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl"
>   - This patch applied for 4.21.
> - Patch "pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)"
>   - This patch applied for 4.21.
> - Patch "dt-bindings: clock: Add Allwinner suniv F1C100s CCU"
>   - Fixed license identifier position
>   - Added DMA fields.
> - Patch "clk: sunxi-ng: add support for suniv F1C100s SoC"
>   - Added DMA reset and clock support.
> - Patch "ARM: dts: suniv: add initial DTSI file for F1C100s"
>   - Remove dt-binding headers. 
>   - Fix uart0 pin label.
> - Patch "ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
>   - Fix uart0 pin label.
> 
> Changes since v3:
> - Patch "ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs"
>   - Remove CONFIG_ARCH_SUNXI_Vx. Use ARCH_MULTI_Vx to differentiate SoC's
>   - Change KConfig ARCH_SUNXI selection: 'select' to 'default'. 
> - Patch "irqchip/sun4i: Add a struct to hold global variables"
>   - Split irq_sun4i.c changes to 3 patch.
> - Patch "pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)"
>   - pinctrl-suniv-f1c100s: remove: disable_strict_mode = true
> - Patch "ARM: dts: suniv: add initial DTSI file for F1C100s"
>   - suniv-f1c100s.dtsi: remove unnecessary componenets.
>   - Instead of patching drivers, add original compatible string with 
> f1c100s compatibles.
>   - Add Acked-by signatures.
> 
> Changes since v2:
> - Patch "ARM: sunxi: add Allwinner ARMv5 SoCs"
>   - Move SUN4I_TIMER option to ARCH_SUNXI
>   - Added help text for MACH_SUNIV
> - Patch "irqchip/sun4i: add support for suniv interrupt controller"
>   - Defined sunxi_irq_chip_data struct and used it to differentiate
>     registers between different chips.
> - Patch " ARM: dts: suniv: add initial DTSI file for F1C100s"
>   - Removed unnecessary fake clock.
>   - Fixed compatible strings.
> 
> Changes since v1:
> - Patch "ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7
>   Allwinner SoCs"
>   - Instead of using a common bool config use a common menuconfig. 
>   - Use ARCH_MULTI_V7 to differentiate V7 SoCs.
>   - Addressed comment from Julian Calaby
> - Patch "ARM: sunxi: add Allwinner ARMv5 SoCs"
>   - Use ARCH_MULTI_V5 to differentiate V5 SoCs.
>   - removed "allwinner,suniv" board compatible string
>   - Added dt-bindings
> - Patch "irqchip/sun4i: add support for suniv interrupt controller"
>   - Added dt-bindings
>   - Changed "allwinner,suniv-ic" to "allwinner,suniv-f1c100s-ic"
> - Patch "clocksource: sun4i: add a compatible for suniv"
>   - Added dt-bindings
>   - Changed "allwinner,suniv-timer" to "allwinner,suniv-f1c100s-timer"
> - Patch "pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)"
>   - Added dt-bindings
>   - Renamed suniv-pinctrl to suniv-f1c100s-pinctrl
> - Patch "clk: sunxi-ng: add support for suniv F1C100s SoC"
>   - Added dt-bindings
>   - Renamed suniv-ccu to suniv-f1c100s-ccu
> - Patch "ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
>   - Addressed comment from Rask Ingemann Lambertsen
> 
> Thanks!
> 
> Mesih Kilinc (17):
>   ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs
>   dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC
>   ARM: sunxi: add Allwinner ARMv5 SoCs
>   dt-bindings: interrupt-controller: Add suniv interrupt-controller
>   irqchip/sun4i: Add a struct to hold global variables
>   irqchip/sun4i: Move IC specific register offsets to struct
>   irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s
>   dt-bindings: timer: Add Allwinner suniv timer
>   clocksource: sun4i: add a compatible for suniv
>   dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl
>   pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)
>   dt-bindings: clock: Add Allwinner suniv F1C100s CCU
>   clk: sunxi-ng: add support for suniv F1C100s SoC
>   dt-bindings: sram: Add Allwinner suniv F1C100s
>   dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt
>   ARM: dts: suniv: add initial DTSI file for F1C100s
>   ARM: suniv: f1c100s: add device tree for Lichee Pi Nano
> 
>  Documentation/devicetree/bindings/arm/sunxi.txt    |   1 +
>  .../devicetree/bindings/clock/sunxi-ccu.txt        |   1 +
>  .../interrupt-controller/allwinner,sun4i-ic.txt    |   4 +-
>  .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt   |   1 +
>  .../devicetree/bindings/sram/sunxi-sram.txt        |   4 +
>  .../bindings/timer/allwinner,sun4i-timer.txt       |   4 +-
>  .../devicetree/bindings/watchdog/sunxi-wdt.txt     |   1 +
>  arch/arm/boot/dts/Makefile                         |   2 +
>  arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts  |  26 +
>  arch/arm/boot/dts/suniv-f1c100s.dtsi               | 147 ++++++
>  arch/arm/mach-sunxi/Kconfig                        |  19 +-
>  arch/arm/mach-sunxi/sunxi.c                        |  10 +
>  drivers/clk/sunxi-ng/Kconfig                       |   5 +
>  drivers/clk/sunxi-ng/Makefile                      |   1 +
>  drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c           | 541 +++++++++++++++++++++
>  drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h           |  34 ++
>  drivers/clocksource/sun4i_timer.c                  |   5 +-
>  drivers/irqchip/irq-sun4i.c                        | 106 ++--
>  drivers/pinctrl/sunxi/Kconfig                      |   4 +
>  drivers/pinctrl/sunxi/Makefile                     |   1 +
>  drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c      | 416 ++++++++++++++++
>  include/dt-bindings/clock/suniv-ccu-f1c100s.h      |  70 +++
>  include/dt-bindings/reset/suniv-ccu-f1c100s.h      |  38 ++
>  23 files changed, 1408 insertions(+), 33 deletions(-)
>  create mode 100644 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
>  create mode 100644 arch/arm/boot/dts/suniv-f1c100s.dtsi
>  create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
>  create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
>  create mode 100644 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
>  create mode 100644 include/dt-bindings/clock/suniv-ccu-f1c100s.h
>  create mode 100644 include/dt-bindings/reset/suniv-ccu-f1c100s.h
> 
> -- 
> 2.7.4
> 
> -- 
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2018-11-29 21:47 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-28 22:33 [PATCH v5 00/17] initial support for "suniv" Allwinner new ARM9 SoC Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 01/17] ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 02/17] dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 03/17] ARM: sunxi: add Allwinner ARMv5 SoCs Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 04/17] dt-bindings: interrupt-controller: Add suniv interrupt-controller Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 05/17] irqchip/sun4i: Add a struct to hold global variables Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 06/17] irqchip/sun4i: Move IC specific register offsets to struct Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 07/17] irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 08/17] dt-bindings: timer: Add Allwinner suniv timer Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 09/17] clocksource: sun4i: add a compatible for suniv Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 10/17] dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 11/17] pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs) Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 12/17] dt-bindings: clock: Add Allwinner suniv F1C100s CCU Mesih Kilinc
2018-11-29  0:47   ` Stephen Boyd
2018-11-28 22:33 ` [PATCH v5 13/17] clk: sunxi-ng: add support for suniv F1C100s SoC Mesih Kilinc
2018-11-29  0:47   ` Stephen Boyd
2018-11-29  6:39     ` Mesih Kilinc
2018-11-29 23:37       ` Stephen Boyd
2018-12-02 20:26         ` Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 14/17] dt-bindings: sram: Add Allwinner suniv F1C100s Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 15/17] dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 16/17] ARM: dts: suniv: add initial DTSI file for F1C100s Mesih Kilinc
2018-11-28 22:33 ` [PATCH v5 17/17] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano Mesih Kilinc
2018-11-29 21:47 ` Priit Laes [this message]
2018-11-29 23:45   ` [linux-sunxi] [PATCH v5 00/17] initial support for "suniv" Allwinner new ARM9 SoC Icenowy Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181129214730.6d6aju4jurai6rmv@plaes.org \
    --to=plaes@plaes.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=icenowy@aosc.io \
    --cc=julian.calaby@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux@armlinux.org.uk \
    --cc=marc.zyngier@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mesihkilinc@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox