From: Christoph Hellwig <hch@lst.de>
To: iommu@lists.linux-foundation.org
Cc: linux-arch@vger.kernel.org, linux-alpha@vger.kernel.org,
linux-ia64@vger.kernel.org, linux-parisc@vger.kernel.org,
Linus Torvalds <torvalds@linux-foundation.org>,
Joerg Roedel <joro@8bytes.org>,
x86@kernel.org, Robin Murphy <robin.murphy@arm.com>,
linux-kernel@vger.kernel.org, Jon Mason <jdmason@kudzu.us>,
xen-devel@lists.xenproject.org,
David Woodhouse <dwmw2@infradead.org>,
linux-arm-kernel@lists.infradead.org,
Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH 16/23] x86/calgary: remove the mapping_error dma_map_ops method
Date: Fri, 30 Nov 2018 14:22:24 +0100 [thread overview]
Message-ID: <20181130132231.16512-17-hch@lst.de> (raw)
In-Reply-To: <20181130132231.16512-1-hch@lst.de>
Return DMA_MAPPING_ERROR instead of the magic bad_dma_addr on a dma
mapping failure and let the core dma-mapping code handle the rest.
Remove the magic EMERGENCY_PAGES that the bad_dma_addr gets redirected to.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/x86/kernel/pci-calgary_64.c | 29 +++++++----------------------
1 file changed, 7 insertions(+), 22 deletions(-)
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index bbfc8b1e9104..e76ec1b8ed1f 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -51,8 +51,6 @@
#include <asm/x86_init.h>
#include <asm/iommu_table.h>
-#define CALGARY_MAPPING_ERROR 0
-
#ifdef CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT
int use_calgary __read_mostly = 1;
#else
@@ -157,8 +155,6 @@ static const unsigned long phb_debug_offsets[] = {
#define PHB_DEBUG_STUFF_OFFSET 0x0020
-#define EMERGENCY_PAGES 32 /* = 128KB */
-
unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED;
static int translate_empty_slots __read_mostly = 0;
static int calgary_detected __read_mostly = 0;
@@ -255,7 +251,7 @@ static unsigned long iommu_range_alloc(struct device *dev,
if (panic_on_overflow)
panic("Calgary: fix the allocator.\n");
else
- return CALGARY_MAPPING_ERROR;
+ return DMA_MAPPING_ERROR;
}
}
@@ -274,11 +270,10 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
dma_addr_t ret;
entry = iommu_range_alloc(dev, tbl, npages);
-
- if (unlikely(entry == CALGARY_MAPPING_ERROR)) {
+ if (unlikely(entry == DMA_MAPPING_ERROR)) {
pr_warn("failed to allocate %u pages in iommu %p\n",
npages, tbl);
- return CALGARY_MAPPING_ERROR;
+ return DMA_MAPPING_ERROR;
}
/* set the return dma address */
@@ -298,8 +293,7 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
unsigned long flags;
/* were we called with bad_dma_address? */
- badend = CALGARY_MAPPING_ERROR + (EMERGENCY_PAGES * PAGE_SIZE);
- if (unlikely(dma_addr < badend)) {
+ if (unlikely(dma_addr == DMA_MAPPING_ERROR)) {
WARN(1, KERN_ERR "Calgary: driver tried unmapping bad DMA "
"address 0x%Lx\n", dma_addr);
return;
@@ -383,7 +377,7 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
npages = iommu_num_pages(vaddr, s->length, PAGE_SIZE);
entry = iommu_range_alloc(dev, tbl, npages);
- if (entry == CALGARY_MAPPING_ERROR) {
+ if (entry == DMA_MAPPING_ERROR) {
/* makes sure unmap knows to stop */
s->dma_length = 0;
goto error;
@@ -401,7 +395,7 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
error:
calgary_unmap_sg(dev, sg, nelems, dir, 0);
for_each_sg(sg, s, nelems, i) {
- sg->dma_address = CALGARY_MAPPING_ERROR;
+ sg->dma_address = DMA_MAPPING_ERROR;
sg->dma_length = 0;
}
return 0;
@@ -454,7 +448,7 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size,
/* set up tces to cover the allocated range */
mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
- if (mapping == CALGARY_MAPPING_ERROR)
+ if (mapping == DMA_MAPPING_ERROR)
goto free;
*dma_handle = mapping;
return ret;
@@ -479,11 +473,6 @@ static void calgary_free_coherent(struct device *dev, size_t size,
free_pages((unsigned long)vaddr, get_order(size));
}
-static int calgary_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
- return dma_addr == CALGARY_MAPPING_ERROR;
-}
-
static const struct dma_map_ops calgary_dma_ops = {
.alloc = calgary_alloc_coherent,
.free = calgary_free_coherent,
@@ -491,7 +480,6 @@ static const struct dma_map_ops calgary_dma_ops = {
.unmap_sg = calgary_unmap_sg,
.map_page = calgary_map_page,
.unmap_page = calgary_unmap_page,
- .mapping_error = calgary_mapping_error,
.dma_supported = dma_direct_supported,
};
@@ -739,9 +727,6 @@ static void __init calgary_reserve_regions(struct pci_dev *dev)
u64 start;
struct iommu_table *tbl = pci_iommu(dev->bus);
- /* reserve EMERGENCY_PAGES from bad_dma_address and up */
- iommu_range_reserve(tbl, CALGARY_MAPPING_ERROR, EMERGENCY_PAGES);
-
/* avoid the BIOS/VGA first 640KB-1MB region */
/* for CalIOC2 - avoid the entire first MB */
if (is_calgary(dev->device)) {
--
2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-11-30 13:29 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-30 13:22 remove the ->mapping_error method from dma_map_ops V3 Christoph Hellwig
2018-11-30 13:22 ` [PATCH 01/23] dma-mapping: provide a generic DMA_MAPPING_ERROR Christoph Hellwig
2018-12-04 16:41 ` Robin Murphy
2018-12-04 22:33 ` Christoph Hellwig
2018-11-30 13:22 ` [PATCH 02/23] dma-direct: remove the mapping_error dma_map_ops method Christoph Hellwig
2018-11-30 13:22 ` [PATCH 03/23] arm: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 04/23] powerpc/iommu: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 05/23] mips/jazz: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 06/23] s390: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 07/23] sparc: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 08/23] parisc/ccio: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 09/23] parisc/sba_iommu: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 10/23] arm64: remove the dummy_dma_ops mapping_error method Christoph Hellwig
2018-11-30 13:22 ` [PATCH 11/23] alpha: remove the mapping_error dma_map_ops method Christoph Hellwig
2018-11-30 13:22 ` [PATCH 12/23] ia64/sba_iommu: improve internal map_page users Christoph Hellwig
2018-11-30 13:22 ` [PATCH 13/23] ia64/sba_iommu: remove the mapping_error dma_map_ops method Christoph Hellwig
2018-11-30 13:22 ` [PATCH 14/23] ia64/sn: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 15/23] x86/amd_gart: " Christoph Hellwig
2018-11-30 13:22 ` Christoph Hellwig [this message]
2018-11-30 13:22 ` [PATCH 17/23] iommu: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 18/23] iommu/intel: small map_page cleanup Christoph Hellwig
2018-11-30 13:22 ` [PATCH 19/23] iommu/vt-d: remove the mapping_error dma_map_ops method Christoph Hellwig
2018-11-30 13:22 ` [PATCH 20/23] iommu/dma-iommu: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 21/23] xen-swiotlb: " Christoph Hellwig
2018-12-02 12:42 ` Konrad Rzeszutek Wilk
2018-11-30 13:22 ` [PATCH 22/23] dma-mapping: " Christoph Hellwig
2018-11-30 13:22 ` [PATCH 23/23] dma-mapping: return an error code from dma_mapping_error Christoph Hellwig
2018-11-30 18:59 ` remove the ->mapping_error method from dma_map_ops V3 Russell King - ARM Linux
2018-11-30 19:43 ` Linus Torvalds
2018-12-03 17:27 ` Christoph Hellwig
2018-12-06 14:57 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181130132231.16512-17-hch@lst.de \
--to=hch@lst.de \
--cc=dwmw2@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jdmason@kudzu.us \
--cc=joro@8bytes.org \
--cc=linux-alpha@vger.kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-parisc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=robin.murphy@arm.com \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).