Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: Linus Walleij <linus.walleij@linaro.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>
Cc: linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>,
	Jagan Teki <jagan@amarulasolutions.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] pinctrl: sunxi: a64: Rename function ts0 to ts
Date: Mon,  3 Dec 2018 23:41:00 +0800	[thread overview]
Message-ID: <20181203154100.4280-3-wens@csie.org> (raw)
In-Reply-To: <20181203154100.4280-1-wens@csie.org>

The A64 only has one TS (transport stream) controller. The datasheet
also lists the function as TS_XXX instead of TS0_XXX.

Rename the function names now before any there are any users.

Fixes: 96851d391d02 ("drivers: pinctrl: add driver for Allwinner A64 SoC")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c | 24 +++++++++++-----------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
index 8b974b2a2486..7b83d3755a0e 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
@@ -324,62 +324,62 @@ static const struct sunxi_desc_pin a64_pins[] = {
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* PCK */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* CLK */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* CLK */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* CK */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* ERR */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* ERR */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* HSYNC */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* SYNC */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* SYNC */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* VSYNC */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* DVLD */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* DVLD */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* D0 */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* D0 */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* D0 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* D1 */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* D1 */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* D1 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* D2 */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* D2 */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* D2 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* D3 */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* D3 */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* D3 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* D4 */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* D4 */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* D4 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* D5 */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* D5 */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* D5 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 10),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* D6 */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* D6 */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* D6 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 11),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "csi"),		/* D7 */
-		  SUNXI_FUNCTION(0x4, "ts0")),		/* D7 */
+		  SUNXI_FUNCTION(0x4, "ts")),		/* D7 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 12),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-- 
2.20.0.rc1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2018-12-03 15:41 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-03 15:40 [PATCH 0/2] pinctrl: sunxi: a64: Drop numeral from csi0/ts0 Chen-Yu Tsai
2018-12-03 15:40 ` [PATCH 1/2] pinctrl: sunxi: a64: Rename function csi0 to csi Chen-Yu Tsai
2018-12-03 15:41 ` Chen-Yu Tsai [this message]
2018-12-03 15:45 ` [PATCH 0/2] pinctrl: sunxi: a64: Drop numeral from csi0/ts0 Maxime Ripard
2018-12-07 12:30 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181203154100.4280-3-wens@csie.org \
    --to=wens@csie.org \
    --cc=jagan@amarulasolutions.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox