Re: [linux-sunxi] [PATCH 0/8] This is a second edition of a series that implements voltage

From: Lee Jones <lee.jones@linaro.org>
To: Priit Laes <plaes@plaes.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Mark Brown <broonie@kernel.org>,
	linux-sunxi <linux-sunxi@googlegroups.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org,
	Olliver Schinagl <oliver@schinagl.nl>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [linux-sunxi] [PATCH 0/8] This is a second edition of a series that implements voltage
Date: Tue, 11 Dec 2018 07:46:54 +0000	[thread overview]
Message-ID: <20181211074654.GF4497@dell> (raw)
In-Reply-To: <20181211071137.k3rqwctnibg6tyc2@plaes.org>

On Tue, 11 Dec 2018, Priit Laes wrote:

> On Mon, Dec 10, 2018 at 08:42:11PM +0200, Priit Laes wrote:
> > ramping for AXP209 DCDC2 and LDO3 regulators and software
> > based soft-start for AXP209 LDO3 regulator.
> 
> Ugh.. managed to botch this series. I'll send a fixed one
> today.

While you're at it, please don't forget to add the version number in
the patch subject lines.  Each patch should have read "[PATCH v2]
<...>" in this submission.

> > Both features are needed to work around a PMIC shutdown when
> > toggling LDO3 on certain boards with high capacitance on the
> > LDO3 output.
> > 
> > Similar features (or workarounds) have been also implemented
> > on u-boot side [1].
> > 
> > Changes since v1:
> > - Rebased on top of next and dropped already merged patches.
> > - Dropped LDO4 full range devicetree change for Lime2 (prev patch 9)
> >   in favor of general pin-bank regulator dependency [2].
> > - Fixed paths in devicetree bindings (patch 3)
> > - Added note about software based soft-start for LDO3 (patch 5)
> > 
> > [1] https://lists.denx.de/pipermail/u-boot/2018-November/348612.html
> > [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-December/618459.html
> > 
> > Olliver Schinagl (8):
> >   mfd: axp20x: name voltage ramping define properly
> >   regulator: axp20x: add support for set_ramp_delay for AXP209
> >   dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209
> >   regulator: axp20x: add software based soft_start for AXP209 LDO3
> >   dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3
> >   regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2
> >   mfd: axp20x: Clean up included headers
> >   mfd: axp20x: use explicit bit defines
> > 
> >  Documentation/devicetree/bindings/mfd/axp20x.txt |   9 +-
> >  arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts  |   2 +-
> >  drivers/mfd/axp20x.c                             |  13 +-
> >  drivers/regulator/axp20x-regulator.c             | 142 +++++++++++++++-
> >  include/linux/mfd/axp20x.h                       |   4 +-
> >  5 files changed, 161 insertions(+), 9 deletions(-)
> > 
> > base-commit: 14cf8c1d5b90a0cf6a8ba51ef59db8da8c7a2622

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel