From: Lokesh Vutla <lokeshvutla@ti.com>
To: <marc.zyngier@arm.com>, Nishanth Menon <nm@ti.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
Rob Herring <robh+dt@kernel.org>, <tglx@linutronix.de>,
<jason@lakedaemon.net>
Cc: Device Tree Mailing List <devicetree@vger.kernel.org>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Lokesh Vutla <lokeshvutla@ti.com>, Sekhar Nori <nsekhar@ti.com>,
linux-kernel@vger.kernel.org, Tero Kristo <t-kristo@ti.com>,
Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v4 05/13] firmware: ti_sci: Add helper apis to manage resources
Date: Thu, 27 Dec 2018 11:43:05 +0530 [thread overview]
Message-ID: <20181227061313.5451-5-lokeshvutla@ti.com> (raw)
In-Reply-To: <20181227061313.5451-1-lokeshvutla@ti.com>
Each resource with in the device can be uniquely identified
by a type and subtype as defined by TISCI. Since this is generic
across the devices, resource allocation also can be made generic
instead of each client driver handling the resource. So add helper
apis to manage the resource.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
drivers/firmware/ti_sci.c | 126 +++++++++++++++++++++++++
include/linux/soc/ti/ti_sci_protocol.h | 48 ++++++++++
2 files changed, 174 insertions(+)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index c2f0815edab6..b6804c214be9 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -2480,6 +2480,132 @@ const struct ti_sci_handle *devm_ti_sci_get_by_phandle(struct device *dev,
}
EXPORT_SYMBOL_GPL(devm_ti_sci_get_by_phandle);
+/*
+ * ti_sci_get_free_resource() - Get a free resource from TISCI resource.
+ * @res: Pointer to the TISCI resource
+ *
+ * Return: resource num if all went ok else TI_SCI_RESOURCE_NULL.
+ */
+u16 ti_sci_get_free_resource(struct ti_sci_resource *res)
+{
+ unsigned long flags;
+ u16 set, free_bit;
+
+ raw_spin_lock_irqsave(&res->lock, flags);
+ for (set = 0; set < res->sets; set++) {
+ free_bit = find_first_zero_bit(res->desc[set].res_map,
+ res->desc[set].num);
+ if (free_bit != res->desc[set].num) {
+ set_bit(free_bit, res->desc[set].res_map);
+ raw_spin_unlock_irqrestore(&res->lock, flags);
+ return res->desc[set].start + free_bit;
+ }
+ }
+ raw_spin_unlock_irqrestore(&res->lock, flags);
+
+ return TI_SCI_RESOURCE_NULL;
+}
+EXPORT_SYMBOL_GPL(ti_sci_get_free_resource);
+
+/**
+ * ti_sci_release_resource() - Release a resource from TISCI resource.
+ * @res: Pointer to the TISCI resource
+ */
+void ti_sci_release_resource(struct ti_sci_resource *res, u16 id)
+{
+ unsigned long flags;
+ u16 set;
+
+ raw_spin_lock_irqsave(&res->lock, flags);
+ for (set = 0; set < res->sets; set++) {
+ if (res->desc[set].start <= id &&
+ (res->desc[set].num + res->desc[set].start) > id)
+ clear_bit(id - res->desc[set].start,
+ res->desc[set].res_map);
+ }
+ raw_spin_unlock_irqrestore(&res->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ti_sci_release_resource);
+
+/**
+ * devm_ti_sci_get_of_resource() - Get a TISCI resource assigned to a device
+ * @handle: TISCI handle
+ * @dev: Device pointer to which the resource is assigned
+ * @of_prop: property name by which the resource are represented
+ *
+ * Note: This function expects of_prop to be in the form of tuples
+ * <type, subtype>. Allocates and initializes ti_sci_resource structure
+ * for each of_prop. Client driver can directly call
+ * ti_sci_(get_free, release)_resource apis for handling the resource.
+ *
+ * Return: Pointer to ti_sci_resource if all went well else appropriate
+ * error pointer.
+ */
+struct ti_sci_resource *
+devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
+ struct device *dev, u32 dev_id, char *of_prop)
+{
+ struct ti_sci_resource *res;
+ u32 resource_subtype;
+ u16 resource_type;
+ int i, ret;
+
+ res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+ if (!res)
+ return ERR_PTR(-ENOMEM);
+
+ res->sets = of_property_count_elems_of_size(dev_of_node(dev), of_prop,
+ sizeof(u32));
+ if (res->sets < 0) {
+ dev_err(dev, "%s resource type ids not available\n", of_prop);
+ return ERR_PTR(res->sets);
+ }
+
+ res->desc = devm_kcalloc(dev, res->sets, sizeof(*res->desc),
+ GFP_KERNEL);
+ if (!res->desc)
+ return ERR_PTR(-ENOMEM);
+
+ ret = ti_sci_get_resource_type(handle_to_ti_sci_info(handle), dev_id,
+ &resource_type);
+ if (ret) {
+ dev_err(dev, "No valid resource type for %u\n", dev_id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ for (i = 0; i < res->sets; i++) {
+ ret = of_property_read_u32_index(dev_of_node(dev), of_prop, i,
+ &resource_subtype);
+ if (ret)
+ return ERR_PTR(-EINVAL);
+
+ ret = handle->ops.rm_core_ops.get_range(handle, dev_id,
+ resource_subtype,
+ &res->desc[i].start,
+ &res->desc[i].num);
+ if (ret) {
+ dev_err(dev, "type %d subtype %d not allocated for host %d\n",
+ resource_type, resource_subtype,
+ handle_to_ti_sci_info(handle)->host_id);
+ return ERR_PTR(ret);
+ }
+
+ dev_dbg(dev, "res type = %d, subtype = %d, start = %d, num = %d\n",
+ resource_type, resource_subtype, res->desc[i].start,
+ res->desc[i].num);
+
+ res->desc[i].res_map =
+ devm_kzalloc(dev, BITS_TO_LONGS(res->desc[i].num) *
+ sizeof(*res->desc[i].res_map), GFP_KERNEL);
+ if (!res->desc[i].res_map)
+ return ERR_PTR(-ENOMEM);
+ }
+ raw_spin_lock_init(&res->lock);
+
+ return res;
+}
+EXPORT_SYMBOL_GPL(devm_ti_sci_get_of_resource);
+
static int tisci_reboot_handler(struct notifier_block *nb, unsigned long mode,
void *cmd)
{
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index 6d17580839dc..2a1a41a17295 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -317,6 +317,33 @@ struct ti_sci_handle {
struct ti_sci_ops ops;
};
+#define TI_SCI_RESOURCE_NULL 0xffff
+
+/**
+ * struct ti_sci_resource_desc - Description of TI SCI resource instance range.
+ * @start: Start index of the resource.
+ * @num: Number of resources.
+ * @res_map: Bitmap to manage the allocation of these resources.
+ */
+struct ti_sci_resource_desc {
+ u16 start;
+ u16 num;
+ unsigned long *res_map;
+};
+
+/**
+ * struct ti_sci_resource - Structure representing a resource assigned
+ * to a device.
+ * @sets: Number of sets available from this resource type
+ * @lock: Lock to guard the res map in each set.
+ * @desc: Array of resource descriptors.
+ */
+struct ti_sci_resource {
+ u16 sets;
+ raw_spinlock_t lock;
+ struct ti_sci_resource_desc *desc;
+};
+
#if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL)
const struct ti_sci_handle *ti_sci_get_handle(struct device *dev);
int ti_sci_put_handle(const struct ti_sci_handle *handle);
@@ -325,6 +352,11 @@ const struct ti_sci_handle *ti_sci_get_by_phandle(struct device_node *np,
const char *property);
const struct ti_sci_handle *devm_ti_sci_get_by_phandle(struct device *dev,
const char *property);
+u16 ti_sci_get_free_resource(struct ti_sci_resource *res);
+void ti_sci_release_resource(struct ti_sci_resource *res, u16 id);
+struct ti_sci_resource *
+devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
+ struct device *dev, u32 dev_id, char *of_prop);
#else /* CONFIG_TI_SCI_PROTOCOL */
@@ -357,6 +389,22 @@ const struct ti_sci_handle *devm_ti_sci_get_by_phandle(struct device *dev,
{
return ERR_PTR(-EINVAL);
}
+
+static inline u16 ti_sci_get_free_resource(struct ti_sci_resource *res)
+{
+ return TI_SCI_RESOURCE_NULL;
+}
+
+static inline void ti_sci_release_resource(struct ti_sci_resource *res, u16 id)
+{
+}
+
+static inline struct ti_sci_resource *
+devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
+ struct device *dev, u32 dev_id, char *of_prop)
+{
+ return ERR_PTR(-EINVAL);
+}
#endif /* CONFIG_TI_SCI_PROTOCOL */
#endif /* __TISCI_PROTOCOL_H */
--
2.19.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-27 6:15 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-27 6:08 [PATCH v4 00/13] Add support for TISCI irqchip drivers Lokesh Vutla
2018-12-27 6:13 ` [PATCH v4 01/13] firmware: ti_sci: Add support to get TISCI handle using of_phandle Lokesh Vutla
2018-12-27 6:13 ` [PATCH v4 02/13] firmware: ti_sci: Add support for RM core ops Lokesh Vutla
2018-12-27 6:13 ` [PATCH v4 03/13] firmware: ti_sci: Add support for IRQ management Lokesh Vutla
2018-12-27 6:13 ` [PATCH v4 04/13] firmware: ti_sci: Add RM mapping table for am654 Lokesh Vutla
2018-12-27 6:13 ` Lokesh Vutla [this message]
2018-12-27 16:15 ` [PATCH v4 05/13] firmware: ti_sci: Add helper apis to manage resources Nishanth Menon
2018-12-27 6:13 ` [PATCH v4 06/13] dt-bindings: irqchip: Introduce TISCI Interrupt router bindings Lokesh Vutla
2018-12-27 6:13 ` [PATCH v4 07/13] irqchip: ti-sci-intr: Add support for Interrupt Router driver Lokesh Vutla
2019-01-16 17:16 ` Marc Zyngier
2019-01-24 10:19 ` Lokesh Vutla
2018-12-27 6:13 ` [RFC PATCH v4 08/13] genirq/msi: Add support for allocating single MSI for a device Lokesh Vutla
2019-01-16 18:30 ` Marc Zyngier
2019-01-24 10:19 ` Lokesh Vutla
2019-02-04 10:33 ` Marc Zyngier
2019-02-05 13:42 ` Lokesh Vutla
2019-02-08 10:39 ` Marc Zyngier
2018-12-27 6:13 ` [RFC PATCH v4 09/13] genirq/msi: Add support for .msi_unprepare callback Lokesh Vutla
2019-01-17 10:39 ` Marc Zyngier
2018-12-27 6:13 ` [RFC PATCH v4 10/13] soc: ti: Add MSI domain support for K3 Interrupt Aggregator Lokesh Vutla
2019-01-15 14:41 ` Nishanth Menon
2018-12-27 6:13 ` [RFC PATCH v4 11/13] dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings Lokesh Vutla
2018-12-27 6:13 ` [RFC PATCH v4 12/13] irqchip: ti-sci-inta: Add support for Interrupt Aggregator driver Lokesh Vutla
2019-01-02 11:49 ` Peter Ujfalusi
2019-01-02 12:26 ` Lokesh Vutla
2019-01-15 12:38 ` Tero Kristo
2019-01-15 14:04 ` Nishanth Menon
2018-12-27 6:13 ` [RFC PATCH v4 13/13] soc: ti: am6: Enable interrupt controller drivers Lokesh Vutla
2019-01-15 13:54 ` Nishanth Menon
2019-01-02 11:58 ` [PATCH v4 00/13] Add support for TISCI irqchip drivers Peter Ujfalusi
2019-01-11 10:28 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181227061313.5451-5-lokeshvutla@ti.com \
--to=lokeshvutla@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox