[PATCH V2 1/1] defconfig: arm64: add imx8qxp support

[PATCH V2 1/1] defconfig: arm64: add imx8qxp support

[Aisheng Dong]

Enable basic drivers for imx8qxp booting up support:
SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock,
Uart, MMC, FEC.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
v1->v2:
 * add more information in commit log
---
 arch/arm64/configs/defconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 3ef443c..f0f38dd 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -43,6 +43,7 @@ CONFIG_ARCH_HISI=y
 CONFIG_ARCH_MEDIATEK=y
 CONFIG_ARCH_MESON=y
 CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_MXC=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_R8A774A1=y
@@ -113,6 +114,8 @@ CONFIG_ARM_SCPI_PROTOCOL=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_EFI_CAPSULE_LOADER=y
+CONFIG_IMX_SCU=y
+CONFIG_IMX_SCU_PD=y
 CONFIG_ACPI=y
 CONFIG_ACPI_APEI=y
 CONFIG_ACPI_APEI_GHES=y
@@ -245,6 +248,7 @@ CONFIG_NET_XGENE=y
 CONFIG_ATL1C=m
 CONFIG_MACB=y
 CONFIG_THUNDER_NIC_PF=y
+CONFIG_FEC=y
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_HNS_DSAF=y
 CONFIG_HNS_ENET=y
@@ -326,6 +330,8 @@ CONFIG_SERIAL_QCOM_GENI=y
 CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
 CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_SERIAL_MVEBU_UART=y
 CONFIG_SERIAL_DEV_BUS=y
 CONFIG_VIRTIO_CONSOLE=y
@@ -365,6 +371,7 @@ CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_IMX8QXP=y
 CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_MSM8994=y
@@ -547,6 +554,7 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ARASAN=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_MMC_SDHCI_CADENCE=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_F_SDH30=y
 CONFIG_MMC_MESON_GX=y
@@ -613,6 +621,7 @@ CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_CLK_QORIQ=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_CLK_IMX8QXP=y
 CONFIG_TI_SCI_CLK=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_QCOM_CLK_SMD_RPM=y
@@ -627,6 +636,7 @@ CONFIG_SDM_GCC_845=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_ARM_MHU=y
+CONFIG_IMX_MBOX=y
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_TI_MESSAGE_MANAGER=y
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 1/1] defconfig: arm64: add imx8qxp support

[Shawn Guo]

On Mon, Jan 14, 2019 at 03:22:21AM +0000, Aisheng Dong wrote:
> Enable basic drivers for imx8qxp booting up support:
> SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock,
> Uart, MMC, FEC.
> 
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

The prefix should be like 'arm64: defconfig: ...'.  I fixed it up and
applied the patch.

Shawn

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel