Re: [PATCH resend] drm/panel: panel-innolux: set display off in innolux_panel_unprepare

[Sean Paul <sean@poorly.run>]

On Fri, Jan 18, 2019 at 12:58:10PM -0500, Sean Paul wrote:
> On Wed, Jan 9, 2019 at 1:59 AM Hsin-Yi, Wang <hsinyi@chromium.org> wrote:
> >
> > Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable()
> > to innolux_panel_unprepare(), so they are consistent with
> > innolux_panel_enable() and innolux_panel_prepare().
> >
> > This also fixes some mode check and irq timeout issue in MTK dsi code.
> >
> > Since some dsi code (e.g. mtk_dsi) have following call trace:
> > 1. drm_panel_disable(), which calls innolux_panel_disable()
> > 2. switch to cmd mode
> > 3. drm_panel_unprepare(), which calls innolux_panel_unprepare()
> >
> > However, mtk_dsi needs to be in cmd mode to be able to send commands
> > (e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()),
> > so we need these functions to be called after the switch to cmd mode happens,
> > i.e. in innolux_panel_unprepare.
> >
> >
> > Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org>
> 
> Reviewed-by: Sean Paul <seanpaul@chromium.org>

Applied to drm-misc-next, thanks for your patch.

Sean

> 
> > ---
> > Resend for review.
> > ---
> >  drivers/gpu/drm/panel/panel-innolux-p079zca.c | 11 +++++------
> >  1 file changed, 5 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
> > index ca4ae45dd307..8e5724b63f1f 100644
> > --- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c
> > +++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
> > @@ -70,18 +70,12 @@ static inline struct innolux_panel *to_innolux_panel(struct drm_panel *panel)
> >  static int innolux_panel_disable(struct drm_panel *panel)
> >  {
> >         struct innolux_panel *innolux = to_innolux_panel(panel);
> > -       int err;
> >
> >         if (!innolux->enabled)
> >                 return 0;
> >
> >         backlight_disable(innolux->backlight);
> >
> > -       err = mipi_dsi_dcs_set_display_off(innolux->link);
> > -       if (err < 0)
> > -               DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
> > -                             err);
> > -
> >         innolux->enabled = false;
> >
> >         return 0;
> > @@ -95,6 +89,11 @@ static int innolux_panel_unprepare(struct drm_panel *panel)
> >         if (!innolux->prepared)
> >                 return 0;
> >
> > +       err = mipi_dsi_dcs_set_display_off(innolux->link);
> > +       if (err < 0)
> > +               DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
> > +                             err);
> > +
> >         err = mipi_dsi_dcs_enter_sleep_mode(innolux->link);
> >         if (err < 0) {
> >                 DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
> > --
> > 2.18.1
> >
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel