* [PATCH] arm64: defconfig: Enable PFUZE100 regulator
@ 2019-02-06 14:02 Carlo Caione
2019-02-06 14:04 ` Fabio Estevam
2019-02-11 3:02 ` Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Carlo Caione @ 2019-02-06 14:02 UTC (permalink / raw)
To: catalin.marinas, will.deacon, linux-arm-kernel, shawnguo, kernel,
fabio.estevam, abel.vesa, l.stach
Cc: Carlo Caione
This is needed to boot correctly from eMMC on the i.MX8MQ EVK board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 10b8e05c3d35..788773d16c7c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -448,6 +448,7 @@ CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_MAX77620=y
+CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPMH=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
--
2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: defconfig: Enable PFUZE100 regulator
2019-02-06 14:02 [PATCH] arm64: defconfig: Enable PFUZE100 regulator Carlo Caione
@ 2019-02-06 14:04 ` Fabio Estevam
2019-02-11 3:02 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2019-02-06 14:04 UTC (permalink / raw)
To: Carlo Caione
Cc: Abel Vesa, Catalin Marinas, Will Deacon, Sascha Hauer,
Fabio Estevam, Shawn Guo,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Lucas Stach
On Wed, Feb 6, 2019 at 12:03 PM Carlo Caione <ccaione@baylibre.com> wrote:
>
> This is needed to boot correctly from eMMC on the i.MX8MQ EVK board.
>
> Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: defconfig: Enable PFUZE100 regulator
2019-02-06 14:02 [PATCH] arm64: defconfig: Enable PFUZE100 regulator Carlo Caione
2019-02-06 14:04 ` Fabio Estevam
@ 2019-02-11 3:02 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2019-02-11 3:02 UTC (permalink / raw)
To: Carlo Caione
Cc: abel.vesa, catalin.marinas, will.deacon, kernel, fabio.estevam,
linux-arm-kernel, l.stach
On Wed, Feb 06, 2019 at 02:02:41PM +0000, Carlo Caione wrote:
> This is needed to boot correctly from eMMC on the i.MX8MQ EVK board.
>
> Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-02-11 3:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-02-06 14:02 [PATCH] arm64: defconfig: Enable PFUZE100 regulator Carlo Caione
2019-02-06 14:04 ` Fabio Estevam
2019-02-11 3:02 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).