From: "sxauwsk@163.com" <sxauwsk@163.com>
To: "Shubhrajyoti Datta" <shubhrajyoti.datta@gmail.com>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>,
"michal.simek" <michal.simek@xilinx.com>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-i2c <linux-i2c@vger.kernel.org>
Subject: [PATCH] i2c: cadence: try reset when master receive error interrupts
Date: Sat, 16 Feb 2019 15:50:19 +0800 [thread overview]
Message-ID: <2019021615501780626817@163.com> (raw)
In-Reply-To: CAKfKVtELqoNNJB0qB88ghGoVrdV2-Ez1DjvmT3dZifntdV0GQg@mail.gmail.com
>Hi Sxauwsk,
>
>On Wed, Jan 30, 2019 at 3:13 PM sxauwsk <sxauwsk@163.com> wrote:
>>
>> When the adapter receive error interrupts, such as NACK, arbitration lost,
>> cdns_i2c_master_xfer return to the caller directly instead of resuming
>> the adapter which resulted in the adapter being out of control.
>>
>> So when driver detect err_status then try to repair and fix it.
>>
>> Signed-off-by: sxauwsk <sxauwsk@163.com>
>> ---
>> drivers/i2c/busses/i2c-cadence.c | 12 +++++++-----
>> 1 file changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
>> index b13605718291..e10048d7524a 100644
>> --- a/drivers/i2c/busses/i2c-cadence.c
>> +++ b/drivers/i2c/busses/i2c-cadence.c
>> @@ -548,10 +548,6 @@ static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
>> cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK,
>> CDNS_I2C_IDR_OFFSET);
>>
>> - /* If it is bus arbitration error, try again */
>> - if (id->err_status & CDNS_I2C_IXR_ARB_LOST)
>> - return -EAGAIN;
>> -
>> return 0;
>> }
>>
>> @@ -617,13 +613,19 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
>> id->bus_hold_flag = 0;
>>
>> ret = cdns_i2c_process_msg(id, msgs, adap);
>> - if (ret)
>> + if (!ret)
>> goto out;
>>
>In case the Arbitration error happend the cdns_i2c_process_msg would return 0
>and we will miss the check below.
>
>Am I missing something ?
>
>> /* Report the other error interrupts to application */
>> if (id->err_status) {
>> cdns_i2c_master_reset(adap);
>>
>> + /* If it is bus arbitration error, try again */
>> + if (id->err_status & CDNS_I2C_IXR_ARB_LOST) {
>> + ret = -EAGAIN;
>> + goto out;
>> + }
>> +
>> if (id->err_status & CDNS_I2C_IXR_NACK) {
>> ret = -ENXIO;
>> goto out;
>> --
>> 2.19.2
>>
>>
In cdns_i2c_process_msg process, when detect arbitration lost error return -EAGAIN to cdns_i2c_master_xfer, not return 0
that mean cdns_i2c_process_msg just go out ignore error check and problem occur, So we should do something when arbitration error detect.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-02-16 7:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-29 19:52 [PATCH] i2c: cadence: try reset when master receive error interrupts sxauwsk
2019-02-15 11:07 ` Shubhrajyoti Datta
2019-02-16 7:50 ` sxauwsk [this message]
2019-02-18 6:33 ` Shubhrajyoti Datta
2019-02-18 7:16 ` sxauwsk
2019-02-18 7:59 ` Shubhrajyoti Datta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2019021615501780626817@163.com \
--to=sxauwsk@163.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=shubhrajyoti.datta@gmail.com \
--cc=shubhrajyoti.datta@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).