linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: "Russell King" <linux@armlinux.org.uk>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Robert Yang" <decatf@gmail.com>,
	"Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 7/8] ARM: tegra: Support L2 cache maintenance done via firmware
Date: Mon, 18 Feb 2019 03:17:25 +0300	[thread overview]
Message-ID: <20190218001726.16785-8-digetx@gmail.com> (raw)
In-Reply-To: <20190218001726.16785-1-digetx@gmail.com>

Trusted Foundations firmware require MMU to be enabled for L2 cache
maintenance on Tegra30, hence perform the maintenance early/late on
suspend-resume respectively.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/mach-tegra/pm.c    | 36 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-tegra/sleep.S | 11 +++++++----
 2 files changed, 43 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 1ad5719779b0..66c8cd63dd86 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -38,6 +38,7 @@
 #include <asm/smp_plat.h>
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
+#include <asm/trusted_foundations.h>
 
 #include "iomap.h"
 #include "pm.h"
@@ -195,8 +196,27 @@ void tegra_idle_lp2_last(void)
 	cpu_cluster_pm_enter();
 	suspend_cpu_complex();
 
+	/*
+	 * L2 cache disabling using kernel API only allowed when all
+	 * secondary CPU's are offline. Cache have to be disabled early
+	 * if cache maintenance is done via Trusted Foundations firmware.
+	 * Note that CPUIDLE won't ever enter powergate on Tegra30 if any
+	 * of secondary CPU's is online and this is the LP2 codepath only
+	 * for Tegra20/30.
+	 */
+	if (trusted_foundations_registered())
+		outer_disable();
+
 	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
 
+	/*
+	 * Resume L2 cache if it wasn't re-enabled early during resume,
+	 * which is the case for Tegra30 that has to re-enable the cache
+	 * via firmware call. In other cases cache is already enabled and
+	 * hence re-enabling is a no-op.
+	 */
+	outer_resume();
+
 	restore_cpu_complex();
 	cpu_cluster_pm_exit();
 }
@@ -340,8 +360,24 @@ static int tegra_suspend_enter(suspend_state_t state)
 		break;
 	}
 
+	/*
+	 * Cache have to be disabled early if cache maintenance is done
+	 * via Trusted Foundations firmware. Otherwise this is a no-op,
+	 * like on Tegra114+.
+	 */
+	if (trusted_foundations_registered())
+		outer_disable();
+
 	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func);
 
+	/*
+	 * Resume L2 cache if it wasn't re-enabled early during resume,
+	 * which is the case for Tegra30 that has to re-enable the cache
+	 * via firmware call. In other cases cache is already enabled and
+	 * hence re-enabling is a no-op.
+	 */
+	outer_resume();
+
 	switch (mode) {
 	case TEGRA_SUSPEND_LP1:
 		tegra_suspend_exit_lp1();
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 5e3496753df1..0a8086d5a47a 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -132,10 +132,13 @@ ENTRY(tegra_shut_off_mmu)
 #ifdef CONFIG_CACHE_L2X0
 	/* Disable L2 cache */
 	check_cpu_part_num 0xc09, r9, r10
-	movweq	r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000)
-	movteq	r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000)
-	moveq	r3, #0
-	streq	r3, [r2, #L2X0_CTRL]
+	retne	r0
+
+	mov32	r2, TEGRA_ARM_PERIF_BASE + 0x3000
+	ldr	r3, [r2, #L2X0_CTRL]
+	mov	r9, #0
+	tst	r3, #1
+	strne	r9, [r2, #L2X0_CTRL]
 #endif
 	ret	r0
 ENDPROC(tegra_shut_off_mmu)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-02-18  0:36 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-18  0:17 [PATCH v4 0/8] Support Trusted Foundations firmware on Tegra30 Dmitry Osipenko
2019-02-18  0:17 ` [PATCH v4 1/8] ARM: trusted_foundations: Implement L2 cache initialization callback Dmitry Osipenko
2019-02-18  0:17 ` [PATCH v4 2/8] ARM: trusted_foundations: Make prepare_idle call to take mode argument Dmitry Osipenko
2019-02-18  0:17 ` [PATCH v4 3/8] ARM: trusted_foundations: Provide information about whether firmware is registered Dmitry Osipenko
2019-02-18  0:17 ` [PATCH v4 4/8] ARM: tegra: Set up L2 cache using Trusted Foundations firmware Dmitry Osipenko
2019-02-18  0:17 ` [PATCH v4 5/8] ARM: tegra: Don't apply CPU erratas in insecure mode Dmitry Osipenko
2019-02-18  0:17 ` [PATCH v4 6/8] ARM: tegra: Always boot CPU in ARM-mode Dmitry Osipenko
2019-02-18  0:17 ` Dmitry Osipenko [this message]
2019-02-18  0:17 ` [PATCH v4 8/8] ARM: tegra: Add firmware calls required for suspend-resume Dmitry Osipenko
2019-02-18  8:51 ` [PATCH v4 0/8] Support Trusted Foundations firmware on Tegra30 Thierry Reding
2019-02-20 13:30 ` Dmitry Osipenko
2019-02-20 16:36   ` Michał Mirosław
2019-02-20 17:01     ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190218001726.16785-8-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=decatf@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mirq-linux@rere.qmqm.pl \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).