* [PATCH] ARM: dts: exynos: Add pin configuration for read strobe for Odroid XU3/XU4 eMMC
@ 2019-02-22 10:19 ` Anand Moon
2019-02-22 10:29 ` Marek Szyprowski
0 siblings, 1 reply; 3+ messages in thread
From: Anand Moon @ 2019-02-22 10:19 UTC (permalink / raw)
To: devicetree, linux-arm-kernel, linux-samsung-soc
Cc: Rob Herring, linux-kernel, Krzysztof Kozlowski, Marek Szyprowski
Add Read Strobe RDQS pin configuration for eMMC to support higher data rate read/write.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 6 ++++++
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index b82af7c89654..4fb3865e082a 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -206,6 +206,12 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
+ sd0_rdqs: sd0-rdqs {
+ samsung,pins = "gpc0-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
sd1_clk: sd1-clk {
samsung,pins = "gpc1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index b299e541cac0..d41397748ed2 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -411,7 +411,7 @@
samsung,dw-mshc-hs400-timing = <0 2>;
samsung,read-strobe-delay = <90>;
pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: exynos: Add pin configuration for read strobe for Odroid XU3/XU4 eMMC
2019-02-22 10:19 ` [PATCH] ARM: dts: exynos: Add pin configuration for read strobe for Odroid XU3/XU4 eMMC Anand Moon
@ 2019-02-22 10:29 ` Marek Szyprowski
2019-02-22 10:33 ` Anand Moon
0 siblings, 1 reply; 3+ messages in thread
From: Marek Szyprowski @ 2019-02-22 10:29 UTC (permalink / raw)
To: Anand Moon, devicetree, linux-arm-kernel, linux-samsung-soc
Cc: Rob Herring, linux-kernel, Krzysztof Kozlowski
Hi Anand,
On 2019-02-22 11:19, Anand Moon wrote:
> Add Read Strobe RDQS pin configuration for eMMC to support higher data rate read/write.
>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 6 ++++++
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> index b82af7c89654..4fb3865e082a 100644
> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> @@ -206,6 +206,12 @@
> samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
> };
>
> + sd0_rdqs: sd0-rdqs {
> + samsung,pins = "gpc0-7";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + };
> +
The above lines are not needed. There is already a sd0_rclk node with
exactly the same configuration just above your change.
> sd1_clk: sd1-clk {
> samsung,pins = "gpc1-0";
> samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index b299e541cac0..d41397748ed2 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -411,7 +411,7 @@
> samsung,dw-mshc-hs400-timing = <0 2>;
> samsung,read-strobe-delay = <90>;
> pinctrl-names = "default";
> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
> bus-width = <8>;
> cap-mmc-highspeed;
> mmc-hs200-1_8v;
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: exynos: Add pin configuration for read strobe for Odroid XU3/XU4 eMMC
2019-02-22 10:29 ` Marek Szyprowski
@ 2019-02-22 10:33 ` Anand Moon
0 siblings, 0 replies; 3+ messages in thread
From: Anand Moon @ 2019-02-22 10:33 UTC (permalink / raw)
To: Marek Szyprowski
Cc: devicetree, linux-samsung-soc, Linux Kernel, Krzysztof Kozlowski,
Rob Herring, linux-arm-kernel
Hi Marek,
On Fri, 22 Feb 2019 at 15:59, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>
> Hi Anand,
>
> On 2019-02-22 11:19, Anand Moon wrote:
> > Add Read Strobe RDQS pin configuration for eMMC to support higher data rate read/write.
> >
> > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > ---
> > arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 6 ++++++
> > arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
> > 2 files changed, 7 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> > index b82af7c89654..4fb3865e082a 100644
> > --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> > +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> > @@ -206,6 +206,12 @@
> > samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
> > };
> >
> > + sd0_rdqs: sd0-rdqs {
> > + samsung,pins = "gpc0-7";
> > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> > + };
> > +
>
> The above lines are not needed. There is already a sd0_rclk node with
> exactly the same configuration just above your change.
>
Sorry once again, I failed to look closely., sorry for the noise.
Best Regards
-Anand
> > sd1_clk: sd1-clk {
> > samsung,pins = "gpc1-0";
> > samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> > index b299e541cac0..d41397748ed2 100644
> > --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> > @@ -411,7 +411,7 @@
> > samsung,dw-mshc-hs400-timing = <0 2>;
> > samsung,read-strobe-delay = <90>;
> > pinctrl-names = "default";
> > - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
> > + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
> > bus-width = <8>;
> > cap-mmc-highspeed;
> > mmc-hs200-1_8v;
>
> Best regards
> --
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-02-22 10:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20190222102034epcas3p373245ed6e3e83e297bcaff48aec37992@epcas3p3.samsung.com>
2019-02-22 10:19 ` [PATCH] ARM: dts: exynos: Add pin configuration for read strobe for Odroid XU3/XU4 eMMC Anand Moon
2019-02-22 10:29 ` Marek Szyprowski
2019-02-22 10:33 ` Anand Moon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).