[PATCH V4 0/4] irq: imx-irqsteer: add 32 interrupts chan and multi outputs support

[PATCH V4 0/4] irq: imx-irqsteer: add 32 interrupts chan and multi outputs support

[Aisheng Dong]

Not all 64 interrupts may be used in one group. e.g. most irqsteer in
imx8qxp and imx8qm subsystems supports only 32 interrupts.
And one irqsteer channel can support up to 8 output interrupts.

This patch series aims to support 32 interrupts chan and multi output
interrupts.

Tested on:
iMX8QXP MEK with MIPI CSI capture and DC Display
iMX8MQ EVK with MIPI DSI Display

Change Log:
v3->v4:
 * no code changes except adding more commit message for Patch 1

Dong Aisheng (4):
  dt-binding: irq: imx-irqsteer: use irq number instead of group number
  dt-bindings: irq: imx-irqsteer: add multi output interrupts support
  irq: imx-irqsteer: change to use reg_num instead of irq_group
  irq: imx: irqsteer: add multi output interrupts support

 .../bindings/interrupt-controller/fsl,irqsteer.txt |  11 +-
 drivers/irqchip/irq-imx-irqsteer.c                 | 115 +++++++++++++++------
 2 files changed, 89 insertions(+), 37 deletions(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 1/4] dt-binding: irq: imx-irqsteer: use irq number instead of group number

[Aisheng Dong]

Not all 64 interrupts may be used in one group. e.g. most irqsteer in
imx8qxp and imx8qm subsystems supports only 32 interrupts.

As the IP integration parameters are Channel number and interrupts number,
let's use fsl,irqs-num to represents how many interrupts supported
by this irqsteer channel.

Note this will break the compatibility of old binding. As the original
fsl,irq-groups was born out of a misunderstanding of the HW config
options and we are not aware of any users of the current binding.
And the old binding was just published in recent months, so it's
worth to change now to avoid confusing in the future.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v3->v4:
 * add more commit messages to describe the compatibility break
v2->v3:
 * no changes
v1->v2:
 * change property name fsl,irqs-per-chan to fsl,num-irqs.
---
 .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt       | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
index 45790ce..6d0a41b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
@@ -16,8 +16,8 @@ Required properties:
 - #interrupt-cells: Specifies the number of cells needed to encode an
   interrupt source. The value must be 1.
 - fsl,channel: The output channel that all input IRQs should be steered into.
-- fsl,irq-groups: Number of IRQ groups managed by this controller instance.
-  Each group manages 64 input interrupts.
+- fsl,num-irqs: Number of input interrupts of this channel.
+  Should be multiple of 32 input interrupts and up to 512 interrupts.
 
 Example:
 
@@ -28,7 +28,7 @@ Example:
 		clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
 		clock-names = "ipg";
 		fsl,channel = <0>;
-		fsl,irq-groups = <1>;
+		fsl,num-irqs = <64>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
 	};
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V4 1/4] dt-binding: irq: imx-irqsteer: use irq number instead of group number

[Rob Herring]

On Wed, 20 Feb 2019 11:40:40 +0000, Aisheng Dong wrote:
> Not all 64 interrupts may be used in one group. e.g. most irqsteer in
> imx8qxp and imx8qm subsystems supports only 32 interrupts.
> 
> As the IP integration parameters are Channel number and interrupts number,
> let's use fsl,irqs-num to represents how many interrupts supported
> by this irqsteer channel.
> 
> Note this will break the compatibility of old binding. As the original
> fsl,irq-groups was born out of a misunderstanding of the HW config
> options and we are not aware of any users of the current binding.
> And the old binding was just published in recent months, so it's
> worth to change now to avoid confusing in the future.
> 
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: devicetree@vger.kernel.org
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
> ChangeLog:
> v3->v4:
>  * add more commit messages to describe the compatibility break
> v2->v3:
>  * no changes
> v1->v2:
>  * change property name fsl,irqs-per-chan to fsl,num-irqs.
> ---
>  .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt       | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 2/4] dt-bindings: irq: imx-irqsteer: add multi output interrupts support

[Aisheng Dong]

One irqsteer channel can support up to 8 output interrupts.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v3->v4:
 * no changes
v2->v3:
 * fix a typo
v1->v2:
 * remove one unnecessary note.
---
 .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt        | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
index 6d0a41b..582991c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
@@ -6,8 +6,9 @@ Required properties:
 	- "fsl,imx8m-irqsteer"
 	- "fsl,imx-irqsteer"
 - reg: Physical base address and size of registers.
-- interrupts: Should contain the parent interrupt line used to multiplex the
-  input interrupts.
+- interrupts: Should contain the up to 8 parent interrupt lines used to
+  multiplex the input interrupts. They should be specified sequentially
+  from output 0 to 7.
 - clocks: Should contain one clock for entry in clock-names
   see Documentation/devicetree/bindings/clock/clock-bindings.txt
 - clock-names:
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V4 2/4] dt-bindings: irq: imx-irqsteer: add multi output interrupts support

[Rob Herring]

On Wed, 20 Feb 2019 11:40:43 +0000, Aisheng Dong wrote:
> One irqsteer channel can support up to 8 output interrupts.
> 
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: devicetree@vger.kernel.org
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
> ChangeLog:
> v3->v4:
>  * no changes
> v2->v3:
>  * fix a typo
> v1->v2:
>  * remove one unnecessary note.
> ---
>  .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt        | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 3/4] irq: imx-irqsteer: change to use reg_num instead of irq_group

[Aisheng Dong]

One group can manage 64 interrupts by using two registers (e.g. STATUS/SET).
However, the integrated irqsteer may support only 32 interrupts which
needs only one register in a group. But the current driver assume there's
a mininum of two registers in a group which result in a wrong register map
for 32 interrupts per channel irqsteer. Let's use the reg_num caculated by
interrupts per channel instead of irq_group to cover this case.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
v2->v4:
 * no changes
v1->v2:
 * The using of property name updated accordingly
---
 drivers/irqchip/irq-imx-irqsteer.c | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
index 5b3f1d7..67ed862 100644
--- a/drivers/irqchip/irq-imx-irqsteer.c
+++ b/drivers/irqchip/irq-imx-irqsteer.c
@@ -13,7 +13,7 @@
 #include <linux/of_platform.h>
 #include <linux/spinlock.h>
 
-#define CTRL_STRIDE_OFF(_t, _r)	(_t * 8 * _r)
+#define CTRL_STRIDE_OFF(_t, _r)	(_t * 4 * _r)
 #define CHANCTRL		0x0
 #define CHANMASK(n, t)		(CTRL_STRIDE_OFF(t, 0) + 0x4 * (n) + 0x4)
 #define CHANSET(n, t)		(CTRL_STRIDE_OFF(t, 1) + 0x4 * (n) + 0x4)
@@ -26,7 +26,7 @@ struct irqsteer_data {
 	struct clk		*ipg_clk;
 	int			irq;
 	raw_spinlock_t		lock;
-	int			irq_groups;
+	int			reg_num;
 	int			channel;
 	struct irq_domain	*domain;
 	u32			*saved_reg;
@@ -35,7 +35,7 @@ struct irqsteer_data {
 static int imx_irqsteer_get_reg_index(struct irqsteer_data *data,
 				      unsigned long irqnum)
 {
-	return (data->irq_groups * 2 - irqnum / 32 - 1);
+	return (data->reg_num - irqnum / 32 - 1);
 }
 
 static void imx_irqsteer_irq_unmask(struct irq_data *d)
@@ -46,9 +46,9 @@ static void imx_irqsteer_irq_unmask(struct irq_data *d)
 	u32 val;
 
 	raw_spin_lock_irqsave(&data->lock, flags);
-	val = readl_relaxed(data->regs + CHANMASK(idx, data->irq_groups));
+	val = readl_relaxed(data->regs + CHANMASK(idx, data->reg_num));
 	val |= BIT(d->hwirq % 32);
-	writel_relaxed(val, data->regs + CHANMASK(idx, data->irq_groups));
+	writel_relaxed(val, data->regs + CHANMASK(idx, data->reg_num));
 	raw_spin_unlock_irqrestore(&data->lock, flags);
 }
 
@@ -60,9 +60,9 @@ static void imx_irqsteer_irq_mask(struct irq_data *d)
 	u32 val;
 
 	raw_spin_lock_irqsave(&data->lock, flags);
-	val = readl_relaxed(data->regs + CHANMASK(idx, data->irq_groups));
+	val = readl_relaxed(data->regs + CHANMASK(idx, data->reg_num));
 	val &= ~BIT(d->hwirq % 32);
-	writel_relaxed(val, data->regs + CHANMASK(idx, data->irq_groups));
+	writel_relaxed(val, data->regs + CHANMASK(idx, data->reg_num));
 	raw_spin_unlock_irqrestore(&data->lock, flags);
 }
 
@@ -94,13 +94,13 @@ static void imx_irqsteer_irq_handler(struct irq_desc *desc)
 
 	chained_irq_enter(irq_desc_get_chip(desc), desc);
 
-	for (i = 0; i < data->irq_groups * 64; i += 32) {
+	for (i = 0; i < data->reg_num * 32; i += 32) {
 		int idx = imx_irqsteer_get_reg_index(data, i);
 		unsigned long irqmap;
 		int pos, virq;
 
 		irqmap = readl_relaxed(data->regs +
-				       CHANSTATUS(idx, data->irq_groups));
+				       CHANSTATUS(idx, data->reg_num));
 
 		for_each_set_bit(pos, &irqmap, 32) {
 			virq = irq_find_mapping(data->domain, pos + i);
@@ -146,12 +146,15 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
 
 	raw_spin_lock_init(&data->lock);
 
-	of_property_read_u32(np, "fsl,irq-groups", &data->irq_groups);
+	of_property_read_u32(np, "fsl,num-irqs", &data->reg_num);
 	of_property_read_u32(np, "fsl,channel", &data->channel);
 
+	/* one register bit map represents 32 input interrupts */
+	data->reg_num /= 32;
+
 	if (IS_ENABLED(CONFIG_PM_SLEEP)) {
 		data->saved_reg = devm_kzalloc(&pdev->dev,
-					sizeof(u32) * data->irq_groups * 2,
+					sizeof(u32) * data->reg_num,
 					GFP_KERNEL);
 		if (!data->saved_reg)
 			return -ENOMEM;
@@ -166,7 +169,7 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
 	/* steer all IRQs into configured channel */
 	writel_relaxed(BIT(data->channel), data->regs + CHANCTRL);
 
-	data->domain = irq_domain_add_linear(np, data->irq_groups * 64,
+	data->domain = irq_domain_add_linear(np, data->reg_num * 32,
 					     &imx_irqsteer_domain_ops, data);
 	if (!data->domain) {
 		dev_err(&pdev->dev, "failed to create IRQ domain\n");
@@ -199,9 +202,9 @@ static void imx_irqsteer_save_regs(struct irqsteer_data *data)
 {
 	int i;
 
-	for (i = 0; i < data->irq_groups * 2; i++)
+	for (i = 0; i < data->reg_num; i++)
 		data->saved_reg[i] = readl_relaxed(data->regs +
-						CHANMASK(i, data->irq_groups));
+						CHANMASK(i, data->reg_num));
 }
 
 static void imx_irqsteer_restore_regs(struct irqsteer_data *data)
@@ -209,9 +212,9 @@ static void imx_irqsteer_restore_regs(struct irqsteer_data *data)
 	int i;
 
 	writel_relaxed(BIT(data->channel), data->regs + CHANCTRL);
-	for (i = 0; i < data->irq_groups * 2; i++)
+	for (i = 0; i < data->reg_num; i++)
 		writel_relaxed(data->saved_reg[i],
-			       data->regs + CHANMASK(i, data->irq_groups));
+			       data->regs + CHANMASK(i, data->reg_num));
 }
 
 static int imx_irqsteer_suspend(struct device *dev)
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 4/4] irq: imx: irqsteer: add multi output interrupts support

[Aisheng Dong]

One irqsteer channel can support up to 8 output interrupts.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v3->v4:
 * no changes
v2->v3:
 * add error check for imx_irqsteer_get_hwirq_base
 * use DIV_ROUND_UP
 * merge 'hwirq +=32' into for loop
 * common error path in probe to avoid replicating clk_disable_unprepare
v1->v2:
 * calculate irq_count by fsl,num-irqs instead of parsing interrupts
   property from devicetree to match the input interrupts and outputs
 * improve output interrupt handler by searching only two registers
   withint the same group
---
 drivers/irqchip/irq-imx-irqsteer.c | 88 +++++++++++++++++++++++++++++---------
 1 file changed, 68 insertions(+), 20 deletions(-)

diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
index 67ed862..d1098f4 100644
--- a/drivers/irqchip/irq-imx-irqsteer.c
+++ b/drivers/irqchip/irq-imx-irqsteer.c
@@ -10,6 +10,7 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/spinlock.h>
 
@@ -21,10 +22,13 @@
 #define CHAN_MINTDIS(t)		(CTRL_STRIDE_OFF(t, 3) + 0x4)
 #define CHAN_MASTRSTAT(t)	(CTRL_STRIDE_OFF(t, 3) + 0x8)
 
+#define CHAN_MAX_OUTPUT_INT	0x8
+
 struct irqsteer_data {
 	void __iomem		*regs;
 	struct clk		*ipg_clk;
-	int			irq;
+	int			irq[CHAN_MAX_OUTPUT_INT];
+	int			irq_count;
 	raw_spinlock_t		lock;
 	int			reg_num;
 	int			channel;
@@ -87,23 +91,47 @@ static const struct irq_domain_ops imx_irqsteer_domain_ops = {
 	.xlate		= irq_domain_xlate_onecell,
 };
 
+static int imx_irqsteer_get_hwirq_base(struct irqsteer_data *data, u32 irq)
+{
+	int i;
+
+	for (i = 0; i < data->irq_count; i++) {
+		if (data->irq[i] == irq)
+			return i * 64;
+	}
+
+	return -EINVAL;
+}
+
 static void imx_irqsteer_irq_handler(struct irq_desc *desc)
 {
 	struct irqsteer_data *data = irq_desc_get_handler_data(desc);
-	int i;
+	int hwirq;
+	int irq, i;
 
 	chained_irq_enter(irq_desc_get_chip(desc), desc);
 
-	for (i = 0; i < data->reg_num * 32; i += 32) {
-		int idx = imx_irqsteer_get_reg_index(data, i);
+	irq = irq_desc_get_irq(desc);
+	hwirq = imx_irqsteer_get_hwirq_base(data, irq);
+	if (hwirq < 0) {
+		pr_warn("%s: unable to get hwirq base for irq %d\n",
+			__func__, irq);
+		return;
+	}
+
+	for (i = 0; i < 2; i++, hwirq += 32) {
+		int idx = imx_irqsteer_get_reg_index(data, hwirq);
 		unsigned long irqmap;
 		int pos, virq;
 
+		if (hwirq >= data->reg_num * 32)
+			break;
+
 		irqmap = readl_relaxed(data->regs +
 				       CHANSTATUS(idx, data->reg_num));
 
 		for_each_set_bit(pos, &irqmap, 32) {
-			virq = irq_find_mapping(data->domain, pos + i);
+			virq = irq_find_mapping(data->domain, pos + hwirq);
 			if (virq)
 				generic_handle_irq(virq);
 		}
@@ -117,7 +145,8 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct irqsteer_data *data;
 	struct resource *res;
-	int ret;
+	u32 irqs_num;
+	int i, ret;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
@@ -130,12 +159,6 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
 		return PTR_ERR(data->regs);
 	}
 
-	data->irq = platform_get_irq(pdev, 0);
-	if (data->irq <= 0) {
-		dev_err(&pdev->dev, "failed to get irq\n");
-		return -ENODEV;
-	}
-
 	data->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
 	if (IS_ERR(data->ipg_clk)) {
 		ret = PTR_ERR(data->ipg_clk);
@@ -146,11 +169,15 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
 
 	raw_spin_lock_init(&data->lock);
 
-	of_property_read_u32(np, "fsl,num-irqs", &data->reg_num);
+	of_property_read_u32(np, "fsl,num-irqs", &irqs_num);
 	of_property_read_u32(np, "fsl,channel", &data->channel);
 
-	/* one register bit map represents 32 input interrupts */
-	data->reg_num /= 32;
+	/*
+	 * There is one output irq for each group of 64 inputs.
+	 * One register bit map can represent 32 input interrupts.
+	 */
+	data->irq_count = DIV_ROUND_UP(irqs_num, 64);
+	data->reg_num = irqs_num / 32;
 
 	if (IS_ENABLED(CONFIG_PM_SLEEP)) {
 		data->saved_reg = devm_kzalloc(&pdev->dev,
@@ -173,23 +200,44 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
 					     &imx_irqsteer_domain_ops, data);
 	if (!data->domain) {
 		dev_err(&pdev->dev, "failed to create IRQ domain\n");
-		clk_disable_unprepare(data->ipg_clk);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out;
 	}
 
-	irq_set_chained_handler_and_data(data->irq, imx_irqsteer_irq_handler,
-					 data);
+	if (!data->irq_count || data->irq_count > CHAN_MAX_OUTPUT_INT) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	for (i = 0; i < data->irq_count; i++) {
+		data->irq[i] = irq_of_parse_and_map(np, i);
+		if (!data->irq[i]) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		irq_set_chained_handler_and_data(data->irq[i],
+						 imx_irqsteer_irq_handler,
+						 data);
+	}
 
 	platform_set_drvdata(pdev, data);
 
 	return 0;
+out:
+	clk_disable_unprepare(data->ipg_clk);
+	return ret;
 }
 
 static int imx_irqsteer_remove(struct platform_device *pdev)
 {
 	struct irqsteer_data *irqsteer_data = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < irqsteer_data->irq_count; i++)
+		irq_set_chained_handler_and_data(irqsteer_data->irq[i],
+						 NULL, NULL);
 
-	irq_set_chained_handler_and_data(irqsteer_data->irq, NULL, NULL);
 	irq_domain_remove(irqsteer_data->domain);
 
 	clk_disable_unprepare(irqsteer_data->ipg_clk);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel