From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: David Airlie <airlied@linux.ie>, Chen-Yu Tsai <wens@csie.org>,
dri-devel@lists.freedesktop.org, Daniel Vetter <daniel@ffwll.ch>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [RFC PATCH] drm/sun4i: Implement gamma correction
Date: Thu, 14 Mar 2019 16:42:03 +0100 [thread overview]
Message-ID: <20190314154203.7fixwajcplie5l3j@flea> (raw)
In-Reply-To: <20190314025838.5867-1-anarsoul@gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 5369 bytes --]
Hi Vasily,
On Wed, Mar 13, 2019 at 07:58:38PM -0700, Vasily Khoruzhick wrote:
> Add support for gamma corretion to sun4i TCON driver. Its LUT has 256
> entries and can be updated only when gamma correction is disabled.
>
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
It's not really clear to me what you expect a comment on?
Maxime
> ---
> drivers/gpu/drm/sun4i/sun4i_crtc.c | 15 ++++++++++++++
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 33 ++++++++++++++++++++++++++++++
> drivers/gpu/drm/sun4i/sun4i_tcon.h | 12 ++++++++++-
> 3 files changed, 59 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_crtc.c b/drivers/gpu/drm/sun4i/sun4i_crtc.c
> index 3eedf335a935..719259d09632 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_crtc.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_crtc.c
> @@ -101,6 +101,20 @@ static void sun4i_crtc_atomic_flush(struct drm_crtc *crtc,
> drm_crtc_send_vblank_event(crtc, event);
> spin_unlock_irq(&crtc->dev->event_lock);
> }
> +
> + if (crtc->state->color_mgmt_changed) {
> + if (crtc->state->gamma_lut) {
> + /* LUT can be only updated when gamma correction is
> + * disabled
> + */
> + sun4i_tcon_enable_gamma(scrtc->tcon, false);
> + sun4i_tcon_load_gamma_lut(scrtc->tcon,
> + crtc->state->gamma_lut->data);
> + sun4i_tcon_enable_gamma(scrtc->tcon, true);
> + } else
> + sun4i_tcon_enable_gamma(scrtc->tcon, false);
> + }
> +
> }
>
> static void sun4i_crtc_atomic_disable(struct drm_crtc *crtc,
> @@ -184,6 +198,7 @@ static const struct drm_crtc_funcs sun4i_crtc_funcs = {
> .set_config = drm_atomic_helper_set_config,
> .enable_vblank = sun4i_crtc_enable_vblank,
> .disable_vblank = sun4i_crtc_disable_vblank,
> + .gamma_set = drm_atomic_helper_legacy_gamma_set,
> };
>
> struct sun4i_crtc *sun4i_crtc_init(struct drm_device *drm,
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index cf45d0f940f9..3f5f9d4f54a6 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -215,6 +215,34 @@ void sun4i_tcon_enable_vblank(struct sun4i_tcon *tcon, bool enable)
> }
> EXPORT_SYMBOL(sun4i_tcon_enable_vblank);
>
> +void sun4i_tcon_load_gamma_lut(struct sun4i_tcon *tcon,
> + struct drm_color_lut *lut)
> +{
> + int i;
> +
> + for (i = 0; i < SUN4I_TCON_GAMMA_LUT_SIZE; i++) {
> + u32 r, g, b;
> +
> + r = drm_color_lut_extract(lut[i].red, 8);
> + g = drm_color_lut_extract(lut[i].green, 8);
> + b = drm_color_lut_extract(lut[i].blue, 8);
> +
> + regmap_write(tcon->regs, SUN4I_TCON_GAMMA_TABLE_REG + 4 * i,
> + SUN4I_TCON_GAMMA_TABLE_R(r) |
> + SUN4I_TCON_GAMMA_TABLE_G(g) |
> + SUN4I_TCON_GAMMA_TABLE_B(b));
> + }
> +}
> +EXPORT_SYMBOL(sun4i_tcon_load_gamma_lut);
> +
> +void sun4i_tcon_enable_gamma(struct sun4i_tcon *tcon, bool enable)
> +{
> + regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
> + SUN4I_TCON_GCTL_GAMMA_ENABLE,
> + enable ? SUN4I_TCON_GCTL_GAMMA_ENABLE : 0);
> +}
> +EXPORT_SYMBOL(sun4i_tcon_enable_gamma);
> +
> /*
> * This function is a helper for TCON output muxing. The TCON output
> * muxing control register in earlier SoCs (without the TCON TOP block)
> @@ -1261,6 +1289,11 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
>
> list_add_tail(&tcon->list, &drv->tcon_list);
>
> + drm_mode_crtc_set_gamma_size(&tcon->crtc->crtc,
> + SUN4I_TCON_GAMMA_LUT_SIZE);
> + drm_crtc_enable_color_mgmt(&tcon->crtc->crtc, 0, false,
> + tcon->crtc->crtc.gamma_size);
> +
> return 0;
>
> err_free_dotclock:
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
> index 84cfb1952ff7..68a29e49e426 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
> @@ -22,6 +22,7 @@
>
> #define SUN4I_TCON_GCTL_REG 0x0
> #define SUN4I_TCON_GCTL_TCON_ENABLE BIT(31)
> +#define SUN4I_TCON_GCTL_GAMMA_ENABLE BIT(30)
> #define SUN4I_TCON_GCTL_IOMAP_MASK BIT(0)
> #define SUN4I_TCON_GCTL_IOMAP_TCON1 (1 << 0)
> #define SUN4I_TCON_GCTL_IOMAP_TCON0 (0 << 0)
> @@ -215,7 +216,13 @@
> #define SUN4I_TCON1_FILL_BEG2_REG 0x31c
> #define SUN4I_TCON1_FILL_END2_REG 0x320
> #define SUN4I_TCON1_FILL_DATA2_REG 0x324
> -#define SUN4I_TCON1_GAMMA_TABLE_REG 0x400
> +
> +#define SUN4I_TCON_GAMMA_TABLE_REG 0x400
> +#define SUN4I_TCON_GAMMA_TABLE_B(x) ((x) & 0xff)
> +#define SUN4I_TCON_GAMMA_TABLE_G(x) (((x) & 0xff) << 8)
> +#define SUN4I_TCON_GAMMA_TABLE_R(x) (((x) & 0xff) << 16)
> +
> +#define SUN4I_TCON_GAMMA_LUT_SIZE 256
>
> #define SUN4I_TCON_MAX_CHANNELS 2
>
> @@ -278,6 +285,9 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon,
> const struct drm_display_mode *mode);
> void sun4i_tcon_set_status(struct sun4i_tcon *crtc,
> const struct drm_encoder *encoder, bool enable);
> +void sun4i_tcon_load_gamma_lut(struct sun4i_tcon *tcon,
> + struct drm_color_lut *lut);
> +void sun4i_tcon_enable_gamma(struct sun4i_tcon *tcon, bool enable);
>
> extern const struct of_device_id sun4i_tcon_of_table[];
>
> --
> 2.21.0
>
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-14 15:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-14 2:58 [RFC PATCH] drm/sun4i: Implement gamma correction Vasily Khoruzhick
2019-03-14 15:42 ` Maxime Ripard [this message]
2019-03-14 17:54 ` Vasily Khoruzhick
2019-03-18 12:20 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190314154203.7fixwajcplie5l3j@flea \
--to=maxime.ripard@bootlin.com \
--cc=airlied@linux.ie \
--cc=anarsoul@gmail.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox