Re: [PATCH] ARM: imx_v6_v7_defconfig: Enable CONFIG_PWM_IMX27

[Thierry Reding <thierry.reding@gmail.com>]

[-- Attachment #1.1: Type: text/plain, Size: 3517 bytes --]

On Thu, Mar 21, 2019 at 10:49:03AM +0100, Uwe Kleine-König wrote:
> Hello,
> 
> On Wed, Mar 20, 2019 at 01:01:26PM +0000, Leonard Crestez wrote:
> > Commit d80f8206905c ("pwm: imx: Split into two drivers") also adds a new
> > CONFIG_PWM_IMX27 for the PWM block on recent IMX chips and we should
> > enable it by default for imx.
> > 
> > Restoring the PWM driver fixes an infinite probe loop in 5.1-rc1 on
> > various imx6qdl-sabresd boards.
> > 
> > Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> > Reported-by: Abel Vesa <abel.vesa@nxp.com>
> 
> This is prior art:
> 
> https://patchwork.ozlabs.org/project/linux-pwm/list/?series=85452&state=%2A&archive=both
> 
> unfortunately this didn't get an Ack by Shawn and Thierry (added to
> recipients) marked it as "Not Applicable".

If I mark patches as "not applicable" it generally means that I don't
intend to apply them to the PWM tree.

Thierry

> Given that the driver change is in Linus Torvald's tree now (since
> v5.1-rc1~38) it doesn't matter much via which tree this goes in and
> Shawn's tree is the easier now.
> 
> @Shawn: Would you please apply my patches? If you don't have them any
> more, I can bounce them to you. See
> 
> 	git show v5.1-rc1~38^2~17 -- drivers/pwm/Kconfig
> 
> for their justification.
> 
> > ---
> >  arch/arm/configs/imx_v6_v7_defconfig | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > Probe loop repeats following lines:
> > 
> > [    3.625031] pwm-backlight backlight-lvds: backlight-lvds supply power not found, using dummy regulator
> > [    3.635868] panel-simple panel: panel supply power not found, using dummy regulator
> > [    3.644844] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > [    3.651478] [drm] No driver support for vblank timestamp query.
> > [    3.657660] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops)
> > [    3.665240] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops)
> > [    3.672819] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops)
> > [    3.680393] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops)
> > [    3.688312] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY)
> > [    3.699743] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops)
> > [    3.707343] imx-drm display-subsystem: failed to bind ldb (ops imx_ldb_ops): -517
> > [    3.716921] imx-drm display-subsystem: master bind failed: -517
> >
> > Maybe it's an imx-drm bug which got exposed by accident?
> 
> IMHO this should be debugged independent of this patch.
>  
> > diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
> > index 5586a5074a96..2fa5074f5244 100644
> > --- a/arch/arm/configs/imx_v6_v7_defconfig
> > +++ b/arch/arm/configs/imx_v6_v7_defconfig
> > @@ -397,10 +397,11 @@ CONFIG_SENSORS_ISL29018=y
> >  CONFIG_MAG3110=y
> >  CONFIG_MPL3115=y
> >  CONFIG_PWM=y
> >  CONFIG_PWM_FSL_FTM=y
> >  CONFIG_PWM_IMX=y
> > +CONFIG_PWM_IMX27=y
> 
> PWM_IMX is gone, so this can be dropped (but see my patch referenced
> above).
> 
> >  CONFIG_NVMEM_IMX_OCOTP=y
> >  CONFIG_NVMEM_VF610_OCOTP=y
> >  CONFIG_TEE=y
> >  CONFIG_OPTEE=y
> >  CONFIG_MUX_MMIO=y
> 
> Best regards
> Uwe
> 
> -- 
> Pengutronix e.K.                           | Uwe Kleine-König            |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel