From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <maxime.ripard@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/28] ARM: dts: sunxi: Fix GIC compatible
Date: Mon, 25 Mar 2019 14:52:37 +0100 [thread overview]
Message-ID: <20190325135300.6440-5-maxime.ripard@bootlin.com> (raw)
In-Reply-To: <20190325135300.6440-1-maxime.ripard@bootlin.com>
As can be shown by the YAML schema now, the combination of GIC compatibles
we were using has never been an option.
Switch to the gic-400 variant, which is the more correct option.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 2 +-
arch/arm/boot/dts/sun7i-a20.dtsi | 2 +-
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 2 +-
arch/arm/boot/dts/sun8i-v3s.dtsi | 2 +-
arch/arm/boot/dts/sun9i-a80.dtsi | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 2445b51dec14..2bc273ce2fe4 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -1027,7 +1027,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 792897a1a215..c153ded1a275 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1453,7 +1453,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 5d2c438e5959..1c1320cfd546 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -599,7 +599,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 7340b01c1994..2d06070bd2bf 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -931,7 +931,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 7918064e0940..ebb496bc8cf5 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -413,7 +413,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
<0x01c84000 0x2000>,
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 7a495c84ab65..7ac1e50808a2 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -527,7 +527,7 @@
};
gic: interrupt-controller@1c41000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c41000 0x1000>,
<0x01c42000 0x2000>,
<0x01c44000 0x2000>,
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-25 13:54 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-25 13:52 [PATCH 01/28] dt-bindings: arm: Remove the CPU compatible documentation Maxime Ripard
2019-03-25 13:52 ` [PATCH 02/28] ARM: dts: sun9i: optimus: Fix fixed-regulators Maxime Ripard
2019-03-25 16:49 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 03/28] ARM: dts: sunxi: Remove stale pinctrl-names entry Maxime Ripard
2019-03-25 16:50 ` Chen-Yu Tsai
2019-03-25 20:02 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 04/28] ARM: dts: sun5i: lichee-pi one: " Maxime Ripard
2019-03-25 16:50 ` Chen-Yu Tsai
2019-03-25 13:52 ` Maxime Ripard [this message]
2019-03-25 16:50 ` [PATCH 05/28] ARM: dts: sunxi: Fix GIC compatible Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 06/28] ARM: dts: sunxi: Switch to new GPIOs properties for i2c-gpio Maxime Ripard
2019-03-25 16:55 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 07/28] ARM: sunxi: Fix the USB PHY ID detect GPIO properties Maxime Ripard
2019-03-25 16:55 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 08/28] ARM: sunxi: Fix the USB PHY VBUS " Maxime Ripard
2019-03-25 16:56 ` Chen-Yu Tsai
2019-03-25 19:41 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 09/28] ARM: dts: sunxi: Fix the TCON output clock Maxime Ripard
2019-03-25 16:58 ` Chen-Yu Tsai
2019-03-25 19:48 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 10/28] ARM: dts: sun8i: tbs-a711: Fix typo in regulators Maxime Ripard
2019-03-25 16:59 ` Chen-Yu Tsai
2019-03-25 19:50 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 11/28] ARM: sunxi: dts: Split USB PHY cells into an array Maxime Ripard
2019-03-25 16:59 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 12/28] ARM: dts: sun8i: r40: Fix AHCI reset-names property Maxime Ripard
2019-03-25 17:00 ` Chen-Yu Tsai
2019-03-25 19:52 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 13/28] ARM: dts: sun8i: r40: Remove useless AHCI properties Maxime Ripard
2019-03-25 17:00 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 14/28] arm64: dts: allwinner: a64: Fix endpoints nodes Maxime Ripard
2019-03-25 17:02 ` Chen-Yu Tsai
2019-03-25 19:57 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 15/28] ARM: dts: sunxi: Remove pinctrl size-cells property Maxime Ripard
2019-03-25 17:02 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 16/28] ARM: dts: sun8i: A23/A33: Fix pinctrl node names Maxime Ripard
2019-03-25 17:02 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 17/28] ARM: dts: sun9i: Remove deprecated pinctrl properties Maxime Ripard
2019-03-26 3:03 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 18/28] arm64: dts: allwinner: a64: Add missing PIO clocks Maxime Ripard
2019-03-25 17:04 ` Chen-Yu Tsai
2019-03-25 19:58 ` Maxime Ripard
2019-03-25 13:52 ` [PATCH 19/28] arm64: dts: allwinner: Fix pinctrl node names Maxime Ripard
2019-03-25 17:04 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 20/28] ARM: dts: sun8i: h3: Refactor the " Maxime Ripard
2019-03-25 17:06 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 21/28] ARM: dts: sunxi: Add default dr_mode Maxime Ripard
2019-03-25 17:07 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 22/28] ARM: dts: sun8i: h3: " Maxime Ripard
2019-03-26 2:46 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 23/28] arm64: dts: allwinner: a64: " Maxime Ripard
2019-03-26 2:47 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 24/28] ARM: dts: sun8i: a83t: Fix the SPDIF binding Maxime Ripard
2019-03-26 2:48 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 25/28] ARM: dts: sun8i: h3: " Maxime Ripard
2019-03-26 2:53 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 26/28] arm64: dts: allwinner: a64: " Maxime Ripard
2019-03-26 2:54 ` Chen-Yu Tsai
2019-03-26 2:55 ` Chen-Yu Tsai
2019-03-25 13:52 ` [PATCH 27/28] arm64: dts: allwinner: a64: Fix the Codec I2S binding Maxime Ripard
2019-03-26 2:55 ` Chen-Yu Tsai
2019-03-25 13:53 ` [PATCH 28/28] ARM: dts: sun8i: a83t: Fix the " Maxime Ripard
2019-03-26 2:58 ` Chen-Yu Tsai
2019-03-25 16:48 ` [PATCH 01/28] dt-bindings: arm: Remove the CPU compatible documentation Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190325135300.6440-5-maxime.ripard@bootlin.com \
--to=maxime.ripard@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox