From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Jagan Teki <jagan@amarulasolutions.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-amarula@amarulasolutions.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/2] arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node
Date: Thu, 18 Apr 2019 13:23:57 +0200 [thread overview]
Message-ID: <20190418112357.qic227rdwordmzyh@flea> (raw)
In-Reply-To: <20190418083543.11695-1-jagan@amarulasolutions.com>
[-- Attachment #1.1: Type: text/plain, Size: 1888 bytes --]
On Thu, Apr 18, 2019 at 02:05:42PM +0530, Jagan Teki wrote:
> Add Goodix GT5663 capacitive touch controller node on
> Amarula A64-Relic board.
>
> The CTP connected to board with,
> - SDA, SCK from i2c1
> - GPIO-LD0 as AVDD28 supply
> - PH4 gpio as interrupt pin
> - PH8 gpio as reset pin
> - X axis is inverted
> - Y axis is inverted
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - drop i2c1, bias-pull-up
>
> .../allwinner/sun50i-a64-amarula-relic.dts | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> index 3575db216016..3819ce396073 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> @@ -49,6 +49,24 @@
> bias-pull-up;
> };
>
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
That's the default already
> + status = "okay";
> +
> + touchscreen@5d {
> + compatible = "goodix,gt5663";
> + reg = <0x5d>;
> + AVDD28-supply = <®_ldo_io0>; /* VCC-CTP: GPIO0-LDO */
> + interrupt-parent = <&pio>;
> + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
> + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */
> + reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH8 */
> + touchscreen-inverted-x;
> + touchscreen-inverted-y;
> + };
> +};
> +
> &mmc1 {
> pinctrl-names = "default";
> pinctrl-0 = <&mmc1_pins>;
> @@ -212,6 +230,13 @@
> regulator-name = "vdd-cpus";
> };
>
> +®_ldo_io0 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
The name of that regulator is AVDD28, which indicates that it would be
a 2.8V regulator?
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-04-18 11:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-18 8:35 [PATCH v2 1/2] arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node Jagan Teki
2019-04-18 8:35 ` [PATCH v2 2/2] arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTP Jagan Teki
2019-04-18 11:24 ` Maxime Ripard
2019-04-18 11:23 ` Maxime Ripard [this message]
2019-04-18 12:30 ` [PATCH v2 1/2] arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node Jagan Teki
2019-04-18 12:57 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190418112357.qic227rdwordmzyh@flea \
--to=maxime.ripard@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jagan@amarulasolutions.com \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michael@amarulasolutions.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox