* [PATCH 1/1] iommu/arm-smmu: Add SID information to context fault log
@ 2019-04-15 8:07 Vivek Gautam
2019-04-15 8:54 ` Marc Gonzalez
2019-04-15 9:41 ` Robin Murphy
0 siblings, 2 replies; 8+ messages in thread
From: Vivek Gautam @ 2019-04-15 8:07 UTC (permalink / raw)
To: joro, will.deacon, robin.murphy, iommu
Cc: linux-arm-kernel, linux-arm-msm, linux-kernel, vivek.gautam
Extract the SID and add the information to context fault log.
This is specially useful in a distributed smmu architecture
where multiple masters are connected to smmu. SID information
helps to quickly identify the faulting master device.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
drivers/iommu/arm-smmu-regs.h | 4 ++++
drivers/iommu/arm-smmu.c | 14 ++++++++++++--
2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/arm-smmu-regs.h b/drivers/iommu/arm-smmu-regs.h
index a1226e4ab5f8..e5be0344b610 100644
--- a/drivers/iommu/arm-smmu-regs.h
+++ b/drivers/iommu/arm-smmu-regs.h
@@ -147,6 +147,10 @@ enum arm_smmu_s2cr_privcfg {
#define CBAR_IRPTNDX_SHIFT 24
#define CBAR_IRPTNDX_MASK 0xff
+#define ARM_SMMU_GR1_CBFRSYNRA(n) (0x400 + ((n) << 2))
+#define CBFRSYNRA_V2_SID_MASK 0xffff
+#define CBFRSYNRA_V1_SID_MASK 0x7fff
+
#define ARM_SMMU_GR1_CBA2R(n) (0x800 + ((n) << 2))
#define CBA2R_RW64_32BIT (0 << 0)
#define CBA2R_RW64_64BIT (1 << 0)
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 045d93884164..aa3426dc68d0 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -575,7 +575,10 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
struct arm_smmu_device *smmu = smmu_domain->smmu;
+ void __iomem *gr1_base = ARM_SMMU_GR1(smmu);
void __iomem *cb_base;
+ u32 cbfrsynra;
+ u16 sid;
cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
fsr = readl_relaxed(cb_base + ARM_SMMU_CB_FSR);
@@ -586,9 +589,16 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
fsynr = readl_relaxed(cb_base + ARM_SMMU_CB_FSYNR0);
iova = readq_relaxed(cb_base + ARM_SMMU_CB_FAR);
+ cbfrsynra = readl_relaxed(gr1_base +
+ ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx));
+ if (smmu->version > ARM_SMMU_V1)
+ sid = cbfrsynra & CBFRSYNRA_V2_SID_MASK;
+ else
+ sid = cbfrsynra & CBFRSYNRA_V1_SID_MASK;
+
dev_err_ratelimited(smmu->dev,
- "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cb=%d\n",
- fsr, iova, fsynr, cfg->cbndx);
+ "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cb=%d sid = %u\n",
+ fsr, iova, fsynr, cfg->cbndx, sid);
writel(fsr, cb_base + ARM_SMMU_CB_FSR);
return IRQ_HANDLED;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 1/1] iommu/arm-smmu: Add SID information to context fault log
2019-04-15 8:07 [PATCH 1/1] iommu/arm-smmu: Add SID information to context fault log Vivek Gautam
@ 2019-04-15 8:54 ` Marc Gonzalez
2019-04-15 12:04 ` Vivek Gautam
2019-04-15 9:41 ` Robin Murphy
1 sibling, 1 reply; 8+ messages in thread
From: Marc Gonzalez @ 2019-04-15 8:54 UTC (permalink / raw)
To: Vivek Gautam; +Cc: MSM, Linux ARM
Trimming CC list for very minor suggestions (feel free to ignore).
On 15/04/2019 10:07, Vivek Gautam wrote:
> Extract the SID and add the information to context fault log.
> This is specially useful in a distributed smmu architecture
> where multiple masters are connected to smmu. SID information
> helps to quickly identify the faulting master device.
I find it slightly clearer to keep acronyms capitalized, such as SMMU.
> @@ -575,7 +575,10 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
> struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
> struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
> struct arm_smmu_device *smmu = smmu_domain->smmu;
> + void __iomem *gr1_base = ARM_SMMU_GR1(smmu);
> void __iomem *cb_base;
> + u32 cbfrsynra;
> + u16 sid;
>
> cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
> fsr = readl_relaxed(cb_base + ARM_SMMU_CB_FSR);
> @@ -586,9 +589,16 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
> fsynr = readl_relaxed(cb_base + ARM_SMMU_CB_FSYNR0);
> iova = readq_relaxed(cb_base + ARM_SMMU_CB_FAR);
>
> + cbfrsynra = readl_relaxed(gr1_base +
> + ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx));
I find it slightly clearer to write
void __iomem *reg;
...
reg = ARM_SMMU_GR1(smmu) + ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx);
cbfrsynra = readl_relaxed(reg);
Regards.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/1] iommu/arm-smmu: Add SID information to context fault log
2019-04-15 8:54 ` Marc Gonzalez
@ 2019-04-15 12:04 ` Vivek Gautam
0 siblings, 0 replies; 8+ messages in thread
From: Vivek Gautam @ 2019-04-15 12:04 UTC (permalink / raw)
To: Marc Gonzalez; +Cc: MSM, Linux ARM
Hi Marc,
On 4/15/2019 2:24 PM, Marc Gonzalez wrote:
> Trimming CC list for very minor suggestions (feel free to ignore)
Thanks for the review. Please find my responses inline below.
>
> On 15/04/2019 10:07, Vivek Gautam wrote:
>
>> Extract the SID and add the information to context fault log.
>> This is specially useful in a distributed smmu architecture
>> where multiple masters are connected to smmu. SID information
>> helps to quickly identify the faulting master device.
> I find it slightly clearer to keep acronyms capitalized, such as SMMU.
Sure, will change it.
>
>
>> @@ -575,7 +575,10 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
>> struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
>> struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
>> struct arm_smmu_device *smmu = smmu_domain->smmu;
>> + void __iomem *gr1_base = ARM_SMMU_GR1(smmu);
>> void __iomem *cb_base;
>> + u32 cbfrsynra;
>> + u16 sid;
>>
>> cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
>> fsr = readl_relaxed(cb_base + ARM_SMMU_CB_FSR);
>> @@ -586,9 +589,16 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
>> fsynr = readl_relaxed(cb_base + ARM_SMMU_CB_FSYNR0);
>> iova = readq_relaxed(cb_base + ARM_SMMU_CB_FAR);
>>
>> + cbfrsynra = readl_relaxed(gr1_base +
>> + ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx));
> I find it slightly clearer to write
>
> void __iomem *reg;
> ...
> reg = ARM_SMMU_GR1(smmu) + ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx);
> cbfrsynra = readl_relaxed(reg);
I would actually argue here, to go with the flow of how this function
declares the variables, for the simple case of symmetry.
Let me know what do you think.
Thanks & regards
Vivek
>
> Regards.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/1] iommu/arm-smmu: Add SID information to context fault log
2019-04-15 8:07 [PATCH 1/1] iommu/arm-smmu: Add SID information to context fault log Vivek Gautam
2019-04-15 8:54 ` Marc Gonzalez
@ 2019-04-15 9:41 ` Robin Murphy
2019-04-15 12:05 ` Vivek Gautam
1 sibling, 1 reply; 8+ messages in thread
From: Robin Murphy @ 2019-04-15 9:41 UTC (permalink / raw)
To: Vivek Gautam, joro, will.deacon, iommu
Cc: linux-arm-msm, linux-kernel, linux-arm-kernel
On 15/04/2019 09:07, Vivek Gautam wrote:
> Extract the SID and add the information to context fault log.
> This is specially useful in a distributed smmu architecture
> where multiple masters are connected to smmu. SID information
> helps to quickly identify the faulting master device.
Hmm, given how it's UNKNOWN for translation faults, which are arguably
the most likely context fault, I reckon it probably makes more sense to
just dump the raw register value for the user to interpret, as we do for
fsr/fsynr.
Robin.
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> ---
> drivers/iommu/arm-smmu-regs.h | 4 ++++
> drivers/iommu/arm-smmu.c | 14 ++++++++++++--
> 2 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iommu/arm-smmu-regs.h b/drivers/iommu/arm-smmu-regs.h
> index a1226e4ab5f8..e5be0344b610 100644
> --- a/drivers/iommu/arm-smmu-regs.h
> +++ b/drivers/iommu/arm-smmu-regs.h
> @@ -147,6 +147,10 @@ enum arm_smmu_s2cr_privcfg {
> #define CBAR_IRPTNDX_SHIFT 24
> #define CBAR_IRPTNDX_MASK 0xff
>
> +#define ARM_SMMU_GR1_CBFRSYNRA(n) (0x400 + ((n) << 2))
> +#define CBFRSYNRA_V2_SID_MASK 0xffff
> +#define CBFRSYNRA_V1_SID_MASK 0x7fff
> +
> #define ARM_SMMU_GR1_CBA2R(n) (0x800 + ((n) << 2))
> #define CBA2R_RW64_32BIT (0 << 0)
> #define CBA2R_RW64_64BIT (1 << 0)
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index 045d93884164..aa3426dc68d0 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -575,7 +575,10 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
> struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
> struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
> struct arm_smmu_device *smmu = smmu_domain->smmu;
> + void __iomem *gr1_base = ARM_SMMU_GR1(smmu);
> void __iomem *cb_base;
> + u32 cbfrsynra;
> + u16 sid;
>
> cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
> fsr = readl_relaxed(cb_base + ARM_SMMU_CB_FSR);
> @@ -586,9 +589,16 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
> fsynr = readl_relaxed(cb_base + ARM_SMMU_CB_FSYNR0);
> iova = readq_relaxed(cb_base + ARM_SMMU_CB_FAR);
>
> + cbfrsynra = readl_relaxed(gr1_base +
> + ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx));
> + if (smmu->version > ARM_SMMU_V1)
> + sid = cbfrsynra & CBFRSYNRA_V2_SID_MASK;
> + else
> + sid = cbfrsynra & CBFRSYNRA_V1_SID_MASK;
> +
> dev_err_ratelimited(smmu->dev,
> - "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cb=%d\n",
> - fsr, iova, fsynr, cfg->cbndx);
> + "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cb=%d sid = %u\n",
> + fsr, iova, fsynr, cfg->cbndx, sid);
>
> writel(fsr, cb_base + ARM_SMMU_CB_FSR);
> return IRQ_HANDLED;
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH 1/1] iommu/arm-smmu: Add SID information to context fault log
2019-04-15 9:41 ` Robin Murphy
@ 2019-04-15 12:05 ` Vivek Gautam
2019-04-15 17:37 ` [PATCH 1/1] iommu/arm-smmu: Log CBFRSYNRA register on context fault Vivek Gautam
0 siblings, 1 reply; 8+ messages in thread
From: Vivek Gautam @ 2019-04-15 12:05 UTC (permalink / raw)
To: Robin Murphy, joro, will.deacon, iommu
Cc: linux-arm-msm, linux-kernel, linux-arm-kernel
On 4/15/2019 3:11 PM, Robin Murphy wrote:
> On 15/04/2019 09:07, Vivek Gautam wrote:
>> Extract the SID and add the information to context fault log.
>> This is specially useful in a distributed smmu architecture
>> where multiple masters are connected to smmu. SID information
>> helps to quickly identify the faulting master device.
>
> Hmm, given how it's UNKNOWN for translation faults, which are arguably
> the most likely context fault, I reckon it probably makes more sense
> to just dump the raw register value for the user to interpret, as we
> do for fsr/fsynr.
Thanks Robin. Sure will update it to dump the raw register value.
Regards
Vivek
>
> Robin.
>
>> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
>> ---
>> drivers/iommu/arm-smmu-regs.h | 4 ++++
>> drivers/iommu/arm-smmu.c | 14 ++++++++++++--
>> 2 files changed, 16 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/iommu/arm-smmu-regs.h
>> b/drivers/iommu/arm-smmu-regs.h
>> index a1226e4ab5f8..e5be0344b610 100644
>> --- a/drivers/iommu/arm-smmu-regs.h
>> +++ b/drivers/iommu/arm-smmu-regs.h
>> @@ -147,6 +147,10 @@ enum arm_smmu_s2cr_privcfg {
>> #define CBAR_IRPTNDX_SHIFT 24
>> #define CBAR_IRPTNDX_MASK 0xff
>> +#define ARM_SMMU_GR1_CBFRSYNRA(n) (0x400 + ((n) << 2))
>> +#define CBFRSYNRA_V2_SID_MASK 0xffff
>> +#define CBFRSYNRA_V1_SID_MASK 0x7fff
>> +
>> #define ARM_SMMU_GR1_CBA2R(n) (0x800 + ((n) << 2))
>> #define CBA2R_RW64_32BIT (0 << 0)
>> #define CBA2R_RW64_64BIT (1 << 0)
>> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
>> index 045d93884164..aa3426dc68d0 100644
>> --- a/drivers/iommu/arm-smmu.c
>> +++ b/drivers/iommu/arm-smmu.c
>> @@ -575,7 +575,10 @@ static irqreturn_t arm_smmu_context_fault(int
>> irq, void *dev)
>> struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
>> struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
>> struct arm_smmu_device *smmu = smmu_domain->smmu;
>> + void __iomem *gr1_base = ARM_SMMU_GR1(smmu);
>> void __iomem *cb_base;
>> + u32 cbfrsynra;
>> + u16 sid;
>> cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
>> fsr = readl_relaxed(cb_base + ARM_SMMU_CB_FSR);
>> @@ -586,9 +589,16 @@ static irqreturn_t arm_smmu_context_fault(int
>> irq, void *dev)
>> fsynr = readl_relaxed(cb_base + ARM_SMMU_CB_FSYNR0);
>> iova = readq_relaxed(cb_base + ARM_SMMU_CB_FAR);
>> + cbfrsynra = readl_relaxed(gr1_base +
>> + ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx));
>> + if (smmu->version > ARM_SMMU_V1)
>> + sid = cbfrsynra & CBFRSYNRA_V2_SID_MASK;
>> + else
>> + sid = cbfrsynra & CBFRSYNRA_V1_SID_MASK;
>> +
>> dev_err_ratelimited(smmu->dev,
>> - "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x,
>> cb=%d\n",
>> - fsr, iova, fsynr, cfg->cbndx);
>> + "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x,
>> cb=%d sid = %u\n",
>> + fsr, iova, fsynr, cfg->cbndx, sid);
>> writel(fsr, cb_base + ARM_SMMU_CB_FSR);
>> return IRQ_HANDLED;
>>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH 1/1] iommu/arm-smmu: Log CBFRSYNRA register on context fault
2019-04-15 12:05 ` Vivek Gautam
@ 2019-04-15 17:37 ` Vivek Gautam
2019-04-19 0:24 ` Bjorn Andersson
0 siblings, 1 reply; 8+ messages in thread
From: Vivek Gautam @ 2019-04-15 17:37 UTC (permalink / raw)
To: joro, will.deacon, robin.murphy, iommu
Cc: linux-arm-kernel, linux-arm-msm, linux-kernel, vivek.gautam
Bits[15:0] in CBFRSYNRA register contain information about
StreamID of the incoming transaction that generated the
fault. Dump CBFRSYNRA register to get this info.
This is specially useful in a distributed SMMU architecture
where multiple masters are connected to the SMMU.
SID information helps to quickly identify the faulting
master device.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
V1 of the patch available @
https://lore.kernel.org/patchwork/patch/1061615/
Changes from v1:
- Dump the raw register value of CBFRSYNRA register in the
context fault log rather than extracting the SID inforamtion
and dumping that.
drivers/iommu/arm-smmu-regs.h | 2 ++
drivers/iommu/arm-smmu.c | 8 ++++++--
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/arm-smmu-regs.h b/drivers/iommu/arm-smmu-regs.h
index a1226e4ab5f8..e9132a926761 100644
--- a/drivers/iommu/arm-smmu-regs.h
+++ b/drivers/iommu/arm-smmu-regs.h
@@ -147,6 +147,8 @@ enum arm_smmu_s2cr_privcfg {
#define CBAR_IRPTNDX_SHIFT 24
#define CBAR_IRPTNDX_MASK 0xff
+#define ARM_SMMU_GR1_CBFRSYNRA(n) (0x400 + ((n) << 2))
+
#define ARM_SMMU_GR1_CBA2R(n) (0x800 + ((n) << 2))
#define CBA2R_RW64_32BIT (0 << 0)
#define CBA2R_RW64_64BIT (1 << 0)
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 045d93884164..a4773e8c6b0e 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -575,7 +575,9 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
struct arm_smmu_device *smmu = smmu_domain->smmu;
+ void __iomem *gr1_base = ARM_SMMU_GR1(smmu);
void __iomem *cb_base;
+ u32 cbfrsynra;
cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
fsr = readl_relaxed(cb_base + ARM_SMMU_CB_FSR);
@@ -585,10 +587,12 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
fsynr = readl_relaxed(cb_base + ARM_SMMU_CB_FSYNR0);
iova = readq_relaxed(cb_base + ARM_SMMU_CB_FAR);
+ cbfrsynra = readl_relaxed(gr1_base +
+ ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx));
dev_err_ratelimited(smmu->dev,
- "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cb=%d\n",
- fsr, iova, fsynr, cfg->cbndx);
+ "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra = 0x%x, cb=%d\n",
+ fsr, iova, fsynr, cbfrsynra, cfg->cbndx);
writel(fsr, cb_base + ARM_SMMU_CB_FSR);
return IRQ_HANDLED;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 1/1] iommu/arm-smmu: Log CBFRSYNRA register on context fault
2019-04-15 17:37 ` [PATCH 1/1] iommu/arm-smmu: Log CBFRSYNRA register on context fault Vivek Gautam
@ 2019-04-19 0:24 ` Bjorn Andersson
2019-04-19 5:34 ` Vivek Gautam
0 siblings, 1 reply; 8+ messages in thread
From: Bjorn Andersson @ 2019-04-19 0:24 UTC (permalink / raw)
To: Vivek Gautam
Cc: linux-arm-msm, joro, will.deacon, linux-kernel, iommu,
robin.murphy, linux-arm-kernel
On Mon 15 Apr 10:37 PDT 2019, Vivek Gautam wrote:
> Bits[15:0] in CBFRSYNRA register contain information about
> StreamID of the incoming transaction that generated the
> fault. Dump CBFRSYNRA register to get this info.
> This is specially useful in a distributed SMMU architecture
> where multiple masters are connected to the SMMU.
> SID information helps to quickly identify the faulting
> master device.
>
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> ---
>
> V1 of the patch available @
> https://lore.kernel.org/patchwork/patch/1061615/
>
> Changes from v1:
> - Dump the raw register value of CBFRSYNRA register in the
> context fault log rather than extracting the SID inforamtion
> and dumping that.
>
> drivers/iommu/arm-smmu-regs.h | 2 ++
> drivers/iommu/arm-smmu.c | 8 ++++++--
> 2 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iommu/arm-smmu-regs.h b/drivers/iommu/arm-smmu-regs.h
> index a1226e4ab5f8..e9132a926761 100644
> --- a/drivers/iommu/arm-smmu-regs.h
> +++ b/drivers/iommu/arm-smmu-regs.h
> @@ -147,6 +147,8 @@ enum arm_smmu_s2cr_privcfg {
> #define CBAR_IRPTNDX_SHIFT 24
> #define CBAR_IRPTNDX_MASK 0xff
>
> +#define ARM_SMMU_GR1_CBFRSYNRA(n) (0x400 + ((n) << 2))
> +
> #define ARM_SMMU_GR1_CBA2R(n) (0x800 + ((n) << 2))
> #define CBA2R_RW64_32BIT (0 << 0)
> #define CBA2R_RW64_64BIT (1 << 0)
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index 045d93884164..a4773e8c6b0e 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -575,7 +575,9 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
> struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
> struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
> struct arm_smmu_device *smmu = smmu_domain->smmu;
> + void __iomem *gr1_base = ARM_SMMU_GR1(smmu);
> void __iomem *cb_base;
> + u32 cbfrsynra;
>
> cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
> fsr = readl_relaxed(cb_base + ARM_SMMU_CB_FSR);
> @@ -585,10 +587,12 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
>
> fsynr = readl_relaxed(cb_base + ARM_SMMU_CB_FSYNR0);
> iova = readq_relaxed(cb_base + ARM_SMMU_CB_FAR);
> + cbfrsynra = readl_relaxed(gr1_base +
> + ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx));
The 80 char limit is more like a guideline anyways...please don't wrap
this.
>
> dev_err_ratelimited(smmu->dev,
> - "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cb=%d\n",
> - fsr, iova, fsynr, cfg->cbndx);
> + "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra = 0x%x, cb=%d\n",
Drop the spaces around '='.
With those addressed, you have my
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> + fsr, iova, fsynr, cbfrsynra, cfg->cbndx);
>
> writel(fsr, cb_base + ARM_SMMU_CB_FSR);
> return IRQ_HANDLED;
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH 1/1] iommu/arm-smmu: Log CBFRSYNRA register on context fault
2019-04-19 0:24 ` Bjorn Andersson
@ 2019-04-19 5:34 ` Vivek Gautam
0 siblings, 0 replies; 8+ messages in thread
From: Vivek Gautam @ 2019-04-19 5:34 UTC (permalink / raw)
To: Bjorn Andersson
Cc: linux-arm-msm, Will Deacon, open list,
list@263.net:IOMMU DRIVERS <iommu@lists.linux-foundation.org>, Joerg Roedel <joro@8bytes.org>, ,
Robin Murphy, Linux ARM
On Fri, Apr 19, 2019 at 5:55 AM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Mon 15 Apr 10:37 PDT 2019, Vivek Gautam wrote:
>
> > Bits[15:0] in CBFRSYNRA register contain information about
> > StreamID of the incoming transaction that generated the
> > fault. Dump CBFRSYNRA register to get this info.
> > This is specially useful in a distributed SMMU architecture
> > where multiple masters are connected to the SMMU.
> > SID information helps to quickly identify the faulting
> > master device.
> >
> > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> > ---
> >
> > V1 of the patch available @
> > https://lore.kernel.org/patchwork/patch/1061615/
> >
> > Changes from v1:
> > - Dump the raw register value of CBFRSYNRA register in the
> > context fault log rather than extracting the SID inforamtion
> > and dumping that.
> >
> > drivers/iommu/arm-smmu-regs.h | 2 ++
> > drivers/iommu/arm-smmu.c | 8 ++++++--
> > 2 files changed, 8 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/iommu/arm-smmu-regs.h b/drivers/iommu/arm-smmu-regs.h
> > index a1226e4ab5f8..e9132a926761 100644
> > --- a/drivers/iommu/arm-smmu-regs.h
> > +++ b/drivers/iommu/arm-smmu-regs.h
> > @@ -147,6 +147,8 @@ enum arm_smmu_s2cr_privcfg {
> > #define CBAR_IRPTNDX_SHIFT 24
> > #define CBAR_IRPTNDX_MASK 0xff
> >
> > +#define ARM_SMMU_GR1_CBFRSYNRA(n) (0x400 + ((n) << 2))
> > +
> > #define ARM_SMMU_GR1_CBA2R(n) (0x800 + ((n) << 2))
> > #define CBA2R_RW64_32BIT (0 << 0)
> > #define CBA2R_RW64_64BIT (1 << 0)
> > diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> > index 045d93884164..a4773e8c6b0e 100644
> > --- a/drivers/iommu/arm-smmu.c
> > +++ b/drivers/iommu/arm-smmu.c
> > @@ -575,7 +575,9 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
> > struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
> > struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
> > struct arm_smmu_device *smmu = smmu_domain->smmu;
> > + void __iomem *gr1_base = ARM_SMMU_GR1(smmu);
> > void __iomem *cb_base;
> > + u32 cbfrsynra;
> >
> > cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
> > fsr = readl_relaxed(cb_base + ARM_SMMU_CB_FSR);
> > @@ -585,10 +587,12 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
> >
> > fsynr = readl_relaxed(cb_base + ARM_SMMU_CB_FSYNR0);
> > iova = readq_relaxed(cb_base + ARM_SMMU_CB_FAR);
> > + cbfrsynra = readl_relaxed(gr1_base +
> > + ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx));
>
> The 80 char limit is more like a guideline anyways...please don't wrap
> this.
>
> >
> > dev_err_ratelimited(smmu->dev,
> > - "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cb=%d\n",
> > - fsr, iova, fsynr, cfg->cbndx);
> > + "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra = 0x%x, cb=%d\n",
>
> Drop the spaces around '='.
>
> With those addressed, you have my
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Thanks for the review Bjorn. Will address above comments and respin.
Best regards
Vivek
>
> Regards,
> Bjorn
>
> > + fsr, iova, fsynr, cbfrsynra, cfg->cbndx);
> >
> > writel(fsr, cb_base + ARM_SMMU_CB_FSR);
> > return IRQ_HANDLED;
> > --
> > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> > of Code Aurora Forum, hosted by The Linux Foundation
> >
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-04-19 5:34 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-04-15 8:07 [PATCH 1/1] iommu/arm-smmu: Add SID information to context fault log Vivek Gautam
2019-04-15 8:54 ` Marc Gonzalez
2019-04-15 12:04 ` Vivek Gautam
2019-04-15 9:41 ` Robin Murphy
2019-04-15 12:05 ` Vivek Gautam
2019-04-15 17:37 ` [PATCH 1/1] iommu/arm-smmu: Log CBFRSYNRA register on context fault Vivek Gautam
2019-04-19 0:24 ` Bjorn Andersson
2019-04-19 5:34 ` Vivek Gautam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).