From: MosesChristopher <moseschristopherb@gmail.com>
To: mchehab@kernel.org, gregkh@linuxfoundation.org,
slongerbeam@gmail.com, p.zabel@pengutronix.de,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com
Cc: devel@driverdev.osuosl.org,
Moses Christopher <moseschristopherb@gmail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: [PATCH] staging: media: use help instead of ---help--- in Kconfig
Date: Sat, 20 Apr 2019 11:04:07 +0000 [thread overview]
Message-ID: <20190420110407.20215-1-moseschristopherb@gmail.com> (raw)
From: Moses Christopher <moseschristopherb@gmail.com>
- Resolve the following warning from the Kconfig,
"WARNING: prefer 'help' over '---help---' for new help texts"
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
---
drivers/staging/media/Kconfig | 2 +-
drivers/staging/media/bcm2048/Kconfig | 2 +-
drivers/staging/media/imx/Kconfig | 4 ++--
drivers/staging/media/ipu3/Kconfig | 2 +-
drivers/staging/media/omap4iss/Kconfig | 2 +-
5 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index 1da5c20d65c0..277df2b39384 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -1,7 +1,7 @@
menuconfig STAGING_MEDIA
bool "Media staging drivers"
default n
- ---help---
+ help
This option allows you to select a number of media drivers that
don't have the "normal" Linux kernel quality level.
Most of them don't follow properly the V4L, DVB and/or RC API's,
diff --git a/drivers/staging/media/bcm2048/Kconfig b/drivers/staging/media/bcm2048/Kconfig
index a9fc6e186494..a1526175eccb 100644
--- a/drivers/staging/media/bcm2048/Kconfig
+++ b/drivers/staging/media/bcm2048/Kconfig
@@ -5,7 +5,7 @@
config I2C_BCM2048
tristate "Broadcom BCM2048 FM Radio Receiver support"
depends on I2C && VIDEO_V4L2 && RADIO_ADAPTERS
- ---help---
+ help
Say Y here if you want support to BCM2048 FM Radio Receiver.
This device driver supports only i2c bus.
diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig
index 36b276ea2ecc..f6d220b649fb 100644
--- a/drivers/staging/media/imx/Kconfig
+++ b/drivers/staging/media/imx/Kconfig
@@ -6,7 +6,7 @@ config VIDEO_IMX_MEDIA
depends on HAS_DMA
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
- ---help---
+ help
Say yes here to enable support for video4linux media controller
driver for the i.MX5/6 SOC.
@@ -17,7 +17,7 @@ config VIDEO_IMX_CSI
tristate "i.MX5/6 Camera Sensor Interface driver"
depends on VIDEO_IMX_MEDIA && VIDEO_DEV && I2C
default y
- ---help---
+ help
A video4linux camera sensor interface driver for i.MX5/6.
config VIDEO_IMX7_CSI
diff --git a/drivers/staging/media/ipu3/Kconfig b/drivers/staging/media/ipu3/Kconfig
index 75cd889f18f7..d5e50f88684a 100644
--- a/drivers/staging/media/ipu3/Kconfig
+++ b/drivers/staging/media/ipu3/Kconfig
@@ -5,7 +5,7 @@ config VIDEO_IPU3_IMGU
depends on X86
select IOMMU_IOVA
select VIDEOBUF2_DMA_SG
- ---help---
+ help
This is the Video4Linux2 driver for Intel IPU3 image processing unit,
found in Intel Skylake and Kaby Lake SoCs and used for processing
images and video.
diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig
index 841cc0b3ce13..4dcbc5065821 100644
--- a/drivers/staging/media/omap4iss/Kconfig
+++ b/drivers/staging/media/omap4iss/Kconfig
@@ -6,5 +6,5 @@ config VIDEO_OMAP4
depends on ARCH_OMAP4 || COMPILE_TEST
select MFD_SYSCON
select VIDEOBUF2_DMA_CONTIG
- ---help---
+ help
Driver for an OMAP 4 ISS controller.
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-04-20 11:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-20 11:04 MosesChristopher [this message]
2019-04-23 6:36 ` [PATCH] staging: media: use help instead of ---help--- in Kconfig Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190420110407.20215-1-moseschristopherb@gmail.com \
--to=moseschristopherb@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=s.hauer@pengutronix.de \
--cc=sakari.ailus@linux.intel.com \
--cc=shawnguo@kernel.org \
--cc=slongerbeam@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).