From: Maxime Ripard <maxime.ripard@bootlin.com>
To: "Clément Péron" <peron.clem@gmail.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
Liam Girdwood <lgirdwood@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Takashi Iwai <tiwai@suse.com>,
Chen-Yu Tsai <wens@csie.org>, Mark Brown <broonie@kernel.org>,
Jaroslav Kysela <perex@perex.cz>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/5] ASoC: sun4i-spdif: Add support for H6 SoC
Date: Thu, 2 May 2019 10:25:26 +0200 [thread overview]
Message-ID: <20190502082526.c5zo4uzceqzizbxo@flea> (raw)
In-Reply-To: <20190419191730.9437-3-peron.clem@gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 3855 bytes --]
On Fri, Apr 19, 2019 at 09:17:27PM +0200, Clément Péron wrote:
> Allwinner H6 has a different mapping for the fifo register controller.
>
> Actually only the fifo tx flush bit is used.
>
> Add a new quirk to know the correct fifo tx flush bit.
>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
> sound/soc/sunxi/sun4i-spdif.c | 42 ++++++++++++++++++++++++++++++-----
> 1 file changed, 36 insertions(+), 6 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
> index b4af4aabead1..19e4bf9caa24 100644
> --- a/sound/soc/sunxi/sun4i-spdif.c
> +++ b/sound/soc/sunxi/sun4i-spdif.c
> @@ -75,6 +75,18 @@
> #define SUN4I_SPDIF_FCTL_RXOM(v) ((v) << 0)
> #define SUN4I_SPDIF_FCTL_RXOM_MASK GENMASK(1, 0)
>
> +#define SUN50I_H6_SPDIF_FCTL (0x14)
> + #define SUN50I_H6_SPDIF_FCTL_HUB_EN BIT(31)
> + #define SUN50I_H6_SPDIF_FCTL_FTX BIT(30)
> + #define SUN50I_H6_SPDIF_FCTL_FRX BIT(29)
> + #define SUN50I_H6_SPDIF_FCTL_TXTL(v) ((v) << 12)
> + #define SUN50I_H6_SPDIF_FCTL_TXTL_MASK GENMASK(19, 12)
> + #define SUN50I_H6_SPDIF_FCTL_RXTL(v) ((v) << 4)
> + #define SUN50I_H6_SPDIF_FCTL_RXTL_MASK GENMASK(10, 4)
> + #define SUN50I_H6_SPDIF_FCTL_TXIM BIT(2)
> + #define SUN50I_H6_SPDIF_FCTL_RXOM(v) ((v) << 0)
> + #define SUN50I_H6_SPDIF_FCTL_RXOM_MASK GENMASK(1, 0)
> +
> #define SUN4I_SPDIF_FSTA (0x18)
> #define SUN4I_SPDIF_FSTA_TXE BIT(14)
> #define SUN4I_SPDIF_FSTA_TXECNTSHT (8)
> @@ -169,16 +181,25 @@ struct sun4i_spdif_dev {
> struct snd_soc_dai_driver cpu_dai_drv;
> struct regmap *regmap;
> struct snd_dmaengine_dai_dma_data dma_params_tx;
> + const struct sun4i_spdif_quirks *quirks;
I guess this will generate a warning since the structure hasn't been
defined yet?
> +};
> +
> +struct sun4i_spdif_quirks {
> + unsigned int reg_dac_txdata; /* TX FIFO offset for DMA config */
> + unsigned int reg_fctl_ftx; /* TX FIFO flush bitmask */
> + bool has_reset;
You don't really need to move it around, you can just add the
structure prototype.
If you do want to move it around, then please do so in a separate patch
> };
>
> static void sun4i_spdif_configure(struct sun4i_spdif_dev *host)
> {
> + const struct sun4i_spdif_quirks *quirks = host->quirks;
> +
> /* soft reset SPDIF */
> regmap_write(host->regmap, SUN4I_SPDIF_CTL, SUN4I_SPDIF_CTL_RESET);
>
> /* flush TX FIFO */
> regmap_update_bits(host->regmap, SUN4I_SPDIF_FCTL,
> - SUN4I_SPDIF_FCTL_FTX, SUN4I_SPDIF_FCTL_FTX);
> + quirks->reg_fctl_ftx, quirks->reg_fctl_ftx);
>
> /* clear TX counter */
> regmap_write(host->regmap, SUN4I_SPDIF_TXCNT, 0);
> @@ -405,22 +426,26 @@ static struct snd_soc_dai_driver sun4i_spdif_dai = {
> .name = "spdif",
> };
>
> -struct sun4i_spdif_quirks {
> - unsigned int reg_dac_txdata; /* TX FIFO offset for DMA config */
> - bool has_reset;
> -};
> -
> static const struct sun4i_spdif_quirks sun4i_a10_spdif_quirks = {
> .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
> + .reg_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
> };
>
> static const struct sun4i_spdif_quirks sun6i_a31_spdif_quirks = {
> .reg_dac_txdata = SUN4I_SPDIF_TXFIFO,
> + .reg_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
> .has_reset = true,
> };
>
> static const struct sun4i_spdif_quirks sun8i_h3_spdif_quirks = {
> .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
> + .reg_fctl_ftx = SUN4I_SPDIF_FCTL_FTX,
> + .has_reset = true,
> +};
>
> +static const struct sun4i_spdif_quirks sun50i_h6_spdif_quirks = {
> + .reg_dac_txdata = SUN8I_SPDIF_TXFIFO,
> + .reg_fctl_ftx = SUN50I_H6_SPDIF_FCTL_FTX,
> .has_reset = true,
The reg_dac_txdata and reg_fctl_ftx changes here should also be part
of a separate patch.
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-02 8:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-19 19:17 [PATCH v2 0/5] Allwinner H6 SPDIF support Clément Péron
2019-04-19 19:17 ` [PATCH v2 1/5] dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible Clément Péron
2019-05-01 19:50 ` Rob Herring
2019-05-01 21:52 ` Rob Herring
2019-05-02 8:20 ` Maxime Ripard
2019-04-19 19:17 ` [PATCH v2 2/5] ASoC: sun4i-spdif: Add support for H6 SoC Clément Péron
2019-05-02 8:25 ` Maxime Ripard [this message]
2019-05-02 9:39 ` Clément Péron
2019-05-03 14:54 ` Maxime Ripard
2019-04-19 19:17 ` [PATCH v2 3/5] arm64: dts: allwinner: Add SPDIF node for Allwinner H6 Clément Péron
2019-04-19 19:17 ` [PATCH v2 4/5] arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1 Clément Péron
2019-04-19 19:17 ` [PATCH v2 5/5] arm64: defconfig: Enable Sun4i SPDIF module Clément Péron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190502082526.c5zo4uzceqzizbxo@flea \
--to=maxime.ripard@bootlin.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=perex@perex.cz \
--cc=peron.clem@gmail.com \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox