[PATCH 01/15] clocksource/drivers/sun4i: Add a compatible for suniv

[PATCH 01/15] clocksource/drivers/sun4i: Add a compatible for suniv

[Daniel Lezcano]

From: Mesih Kilinc <mesihkilinc@gmail.com>

The suniv (new F-series) chip has a timer with less functionality than
the A10 timer, e.g. it has only 3 channels.

Add a new compatible for it. As we didn't use the extra channels on A10
either now, the code needn't to be changed.

The suniv chip is based on ARM926EJ-S CPU, thus it has no architecture timer.

Register sun4i_timer as sched_clock on it.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-sun4i.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/timer-sun4i.c b/drivers/clocksource/timer-sun4i.c
index 6e0180aaf784..65f38f6ca714 100644
--- a/drivers/clocksource/timer-sun4i.c
+++ b/drivers/clocksource/timer-sun4i.c
@@ -186,7 +186,8 @@ static int __init sun4i_timer_init(struct device_node *node)
 	 */
 	if (of_machine_is_compatible("allwinner,sun4i-a10") ||
 	    of_machine_is_compatible("allwinner,sun5i-a13") ||
-	    of_machine_is_compatible("allwinner,sun5i-a10s"))
+	    of_machine_is_compatible("allwinner,sun5i-a10s") ||
+	    of_machine_is_compatible("allwinner,suniv-f1c100s"))
 		sched_clock_register(sun4i_timer_sched_read, 32,
 				     timer_of_rate(&to));
 
@@ -218,3 +219,5 @@ static int __init sun4i_timer_init(struct device_node *node)
 }
 TIMER_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
 		       sun4i_timer_init);
+TIMER_OF_DECLARE(suniv, "allwinner,suniv-f1c100s-timer",
+		       sun4i_timer_init);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 07/15] ARM: at91: move SoC specific definitions to SoC folder

[Daniel Lezcano]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Move linux/atmel_tc.h to the SoC specific folder include/soc/at91.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/tcb_clksrc.c                   | 2 +-
 drivers/misc/atmel_tclib.c                         | 2 +-
 drivers/pwm/pwm-atmel-tcb.c                        | 2 +-
 include/{linux/atmel_tc.h => soc/at91/atmel_tcb.h} | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)
 rename include/{linux/atmel_tc.h => soc/at91/atmel_tcb.h} (99%)

diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 43f4d5c4d6fa..138a12090149 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -11,7 +11,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
-#include <linux/atmel_tc.h>
+#include <soc/at91/atmel_tcb.h>
 
 
 /*
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
index ac24a4bd63f7..194f774ab3a1 100644
--- a/drivers/misc/atmel_tclib.c
+++ b/drivers/misc/atmel_tclib.c
@@ -1,4 +1,3 @@
-#include <linux/atmel_tc.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/init.h>
@@ -10,6 +9,7 @@
 #include <linux/slab.h>
 #include <linux/export.h>
 #include <linux/of.h>
+#include <soc/at91/atmel_tcb.h>
 
 /*
  * This is a thin library to solve the problem of how to portably allocate
diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c
index 0d0f8376bc35..7da1fdb4d269 100644
--- a/drivers/pwm/pwm-atmel-tcb.c
+++ b/drivers/pwm/pwm-atmel-tcb.c
@@ -17,10 +17,10 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-#include <linux/atmel_tc.h>
 #include <linux/pwm.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
+#include <soc/at91/atmel_tcb.h>
 
 #define NPWM	6
 
diff --git a/include/linux/atmel_tc.h b/include/soc/at91/atmel_tcb.h
similarity index 99%
rename from include/linux/atmel_tc.h
rename to include/soc/at91/atmel_tcb.h
index 468fdfa643f0..c3c7200ce151 100644
--- a/include/linux/atmel_tc.h
+++ b/include/soc/at91/atmel_tcb.h
@@ -7,8 +7,8 @@
  * (at your option) any later version.
  */
 
-#ifndef ATMEL_TC_H
-#define ATMEL_TC_H
+#ifndef __SOC_ATMEL_TCB_H
+#define __SOC_ATMEL_TCB_H
 
 #include <linux/compiler.h>
 #include <linux/list.h>
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 08/15] clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib

[Daniel Lezcano]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

atmel_tclib is probed too late in the boot process to be able to use the
TCB as the boot clocksource. This is an issue for SoCs without the PIT
(sams70, samv70 and samv71 families) as they simply currently can't boot.

Get rid of the atmel_tclib dependency and probe everything on our own using
the correct device tree binding.

This also allows getting rid of ATMEL_TCB_CLKSRC_BLOCK and makes the driver
a bit more flexible as the TCB is not hardcoded in the kernel anymore.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/tcb_clksrc.c | 108 +++++++++++++++++++------------
 drivers/misc/Kconfig             |  14 +---
 2 files changed, 70 insertions(+), 52 deletions(-)

diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 138a12090149..bf68504da94a 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -9,7 +9,8 @@
 #include <linux/err.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
-#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/syscore_ops.h>
 #include <soc/at91/atmel_tcb.h>
 
@@ -28,13 +29,6 @@
  *     source, used in either periodic or oneshot mode.  This runs
  *     at 32 KiHZ, and can handle delays of up to two seconds.
  *
- * A boot clocksource and clockevent source are also currently needed,
- * unless the relevant platforms (ARM/AT91, AVR32/AT32) are changed so
- * this code can be used when init_timers() is called, well before most
- * devices are set up.  (Some low end AT91 parts, which can run uClinux,
- * have only the timers in one TC block... they currently don't support
- * the tclib code, because of that initialization issue.)
- *
  * REVISIT behavior during system suspend states... we should disable
  * all clocks and save the power.  Easily done for clockevent devices,
  * but clocksources won't necessarily get the needed notifications.
@@ -112,7 +106,6 @@ void tc_clksrc_resume(struct clocksource *cs)
 }
 
 static struct clocksource clksrc = {
-	.name           = "tcb_clksrc",
 	.rating         = 200,
 	.read           = tc_get_cycles,
 	.mask           = CLOCKSOURCE_MASK(32),
@@ -214,7 +207,6 @@ static int tc_next_event(unsigned long delta, struct clock_event_device *d)
 
 static struct tc_clkevt_device clkevt = {
 	.clkevt	= {
-		.name			= "tc_clkevt",
 		.features		= CLOCK_EVT_FEAT_PERIODIC |
 					  CLOCK_EVT_FEAT_ONESHOT,
 		/* Should be lower than at91rm9200's system timer */
@@ -330,39 +322,73 @@ static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_id
 	writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
 }
 
-static int __init tcb_clksrc_init(void)
-{
-	static char bootinfo[] __initdata
-		= KERN_DEBUG "%s: tc%d at %d.%03d MHz\n";
+static const u8 atmel_tcb_divisors[5] = { 2, 8, 32, 128, 0, };
+
+static const struct of_device_id atmel_tcb_of_match[] = {
+	{ .compatible = "atmel,at91rm9200-tcb", .data = (void *)16, },
+	{ .compatible = "atmel,at91sam9x5-tcb", .data = (void *)32, },
+	{ /* sentinel */ }
+};
 
-	struct platform_device *pdev;
-	struct atmel_tc *tc;
+static int __init tcb_clksrc_init(struct device_node *node)
+{
+	struct atmel_tc tc;
 	struct clk *t0_clk;
+	const struct of_device_id *match;
 	u32 rate, divided_rate = 0;
 	int best_divisor_idx = -1;
 	int clk32k_divisor_idx = -1;
+	int bits;
 	int i;
 	int ret;
 
-	tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK);
-	if (!tc) {
-		pr_debug("can't alloc TC for clocksource\n");
-		return -ENODEV;
+	/* Protect against multiple calls */
+	if (tcaddr)
+		return 0;
+
+	tc.regs = of_iomap(node->parent, 0);
+	if (!tc.regs)
+		return -ENXIO;
+
+	t0_clk = of_clk_get_by_name(node->parent, "t0_clk");
+	if (IS_ERR(t0_clk))
+		return PTR_ERR(t0_clk);
+
+	tc.slow_clk = of_clk_get_by_name(node->parent, "slow_clk");
+	if (IS_ERR(tc.slow_clk))
+		return PTR_ERR(tc.slow_clk);
+
+	tc.clk[0] = t0_clk;
+	tc.clk[1] = of_clk_get_by_name(node->parent, "t1_clk");
+	if (IS_ERR(tc.clk[1]))
+		tc.clk[1] = t0_clk;
+	tc.clk[2] = of_clk_get_by_name(node->parent, "t2_clk");
+	if (IS_ERR(tc.clk[2]))
+		tc.clk[2] = t0_clk;
+
+	tc.irq[2] = of_irq_get(node->parent, 2);
+	if (tc.irq[2] <= 0) {
+		tc.irq[2] = of_irq_get(node->parent, 0);
+		if (tc.irq[2] <= 0)
+			return -EINVAL;
 	}
-	tcaddr = tc->regs;
-	pdev = tc->pdev;
 
-	t0_clk = tc->clk[0];
+	match = of_match_node(atmel_tcb_of_match, node->parent);
+	bits = (uintptr_t)match->data;
+
+	for (i = 0; i < ARRAY_SIZE(tc.irq); i++)
+		writel(ATMEL_TC_ALL_IRQ, tc.regs + ATMEL_TC_REG(i, IDR));
+
 	ret = clk_prepare_enable(t0_clk);
 	if (ret) {
 		pr_debug("can't enable T0 clk\n");
-		goto err_free_tc;
+		return ret;
 	}
 
 	/* How fast will we be counting?  Pick something over 5 MHz.  */
 	rate = (u32) clk_get_rate(t0_clk);
-	for (i = 0; i < 5; i++) {
-		unsigned divisor = atmel_tc_divisors[i];
+	for (i = 0; i < ARRAY_SIZE(atmel_tcb_divisors); i++) {
+		unsigned divisor = atmel_tcb_divisors[i];
 		unsigned tmp;
 
 		/* remember 32 KiHz clock for later */
@@ -381,27 +407,29 @@ static int __init tcb_clksrc_init(void)
 		best_divisor_idx = i;
 	}
 
-
-	printk(bootinfo, clksrc.name, CONFIG_ATMEL_TCB_CLKSRC_BLOCK,
-			divided_rate / 1000000,
+	clksrc.name = kbasename(node->parent->full_name);
+	clkevt.clkevt.name = kbasename(node->parent->full_name);
+	pr_debug("%s at %d.%03d MHz\n", clksrc.name, divided_rate / 1000000,
 			((divided_rate % 1000000) + 500) / 1000);
 
-	if (tc->tcb_config && tc->tcb_config->counter_width == 32) {
+	tcaddr = tc.regs;
+
+	if (bits == 32) {
 		/* use apropriate function to read 32 bit counter */
 		clksrc.read = tc_get_cycles32;
 		/* setup ony channel 0 */
-		tcb_setup_single_chan(tc, best_divisor_idx);
+		tcb_setup_single_chan(&tc, best_divisor_idx);
 	} else {
-		/* tclib will give us three clocks no matter what the
+		/* we have three clocks no matter what the
 		 * underlying platform supports.
 		 */
-		ret = clk_prepare_enable(tc->clk[1]);
+		ret = clk_prepare_enable(tc.clk[1]);
 		if (ret) {
 			pr_debug("can't enable T1 clk\n");
 			goto err_disable_t0;
 		}
 		/* setup both channel 0 & 1 */
-		tcb_setup_dual_chan(tc, best_divisor_idx);
+		tcb_setup_dual_chan(&tc, best_divisor_idx);
 	}
 
 	/* and away we go! */
@@ -410,7 +438,7 @@ static int __init tcb_clksrc_init(void)
 		goto err_disable_t1;
 
 	/* channel 2:  periodic and oneshot timer support */
-	ret = setup_clkevents(tc, clk32k_divisor_idx);
+	ret = setup_clkevents(&tc, clk32k_divisor_idx);
 	if (ret)
 		goto err_unregister_clksrc;
 
@@ -420,14 +448,14 @@ static int __init tcb_clksrc_init(void)
 	clocksource_unregister(&clksrc);
 
 err_disable_t1:
-	if (!tc->tcb_config || tc->tcb_config->counter_width != 32)
-		clk_disable_unprepare(tc->clk[1]);
+	if (bits != 32)
+		clk_disable_unprepare(tc.clk[1]);
 
 err_disable_t0:
 	clk_disable_unprepare(t0_clk);
 
-err_free_tc:
-	atmel_tc_free(tc);
+	tcaddr = NULL;
+
 	return ret;
 }
-arch_initcall(tcb_clksrc_init);
+TIMER_OF_DECLARE(atmel_tcb_clksrc, "atmel,tcb-timer", tcb_clksrc_init);
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 42ab8ec92a04..268a01d3d6f3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -61,7 +61,8 @@ config ATMEL_TCLIB
 
 config ATMEL_TCB_CLKSRC
 	bool "TC Block Clocksource"
-	depends on ATMEL_TCLIB
+	depends on ARCH_AT91
+	select TIMER_OF if OF
 	default y
 	help
 	  Select this to get a high precision clocksource based on a
@@ -72,17 +73,6 @@ config ATMEL_TCB_CLKSRC
 	  may be used as a clock event device supporting oneshot mode
 	  (delays of up to two seconds) based on the 32 KiHz clock.
 
-config ATMEL_TCB_CLKSRC_BLOCK
-	int
-	depends on ATMEL_TCB_CLKSRC
-	default 0
-	range 0 1
-	help
-	  Some chips provide more than one TC block, so you have the
-	  choice of which one to use for the clock framework.  The other
-	  TC can be used for other purposes, such as PWM generation and
-	  interval timing.
-
 config DUMMY_IRQ
 	tristate "Dummy IRQ handler"
 	default n
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 09/15] clocksource/drivers/tcb_clksrc: Use tcb as sched_clock

[Daniel Lezcano]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Now that the driver is registered early enough, use the TCB as the
sched_clock which is much more accurate than the jiffies implementation.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/tcb_clksrc.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index bf68504da94a..9de8c10ab546 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -11,6 +11,7 @@
 #include <linux/io.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/sched_clock.h>
 #include <linux/syscore_ops.h>
 #include <soc/at91/atmel_tcb.h>
 
@@ -114,6 +115,16 @@ static struct clocksource clksrc = {
 	.resume		= tc_clksrc_resume,
 };
 
+static u64 notrace tc_sched_clock_read(void)
+{
+	return tc_get_cycles(&clksrc);
+}
+
+static u64 notrace tc_sched_clock_read32(void)
+{
+	return tc_get_cycles32(&clksrc);
+}
+
 #ifdef CONFIG_GENERIC_CLOCKEVENTS
 
 struct tc_clkevt_device {
@@ -335,6 +346,7 @@ static int __init tcb_clksrc_init(struct device_node *node)
 	struct atmel_tc tc;
 	struct clk *t0_clk;
 	const struct of_device_id *match;
+	u64 (*tc_sched_clock)(void);
 	u32 rate, divided_rate = 0;
 	int best_divisor_idx = -1;
 	int clk32k_divisor_idx = -1;
@@ -419,6 +431,7 @@ static int __init tcb_clksrc_init(struct device_node *node)
 		clksrc.read = tc_get_cycles32;
 		/* setup ony channel 0 */
 		tcb_setup_single_chan(&tc, best_divisor_idx);
+		tc_sched_clock = tc_sched_clock_read32;
 	} else {
 		/* we have three clocks no matter what the
 		 * underlying platform supports.
@@ -430,6 +443,7 @@ static int __init tcb_clksrc_init(struct device_node *node)
 		}
 		/* setup both channel 0 & 1 */
 		tcb_setup_dual_chan(&tc, best_divisor_idx);
+		tc_sched_clock = tc_sched_clock_read;
 	}
 
 	/* and away we go! */
@@ -442,6 +456,8 @@ static int __init tcb_clksrc_init(struct device_node *node)
 	if (ret)
 		goto err_unregister_clksrc;
 
+	sched_clock_register(tc_sched_clock, 32, divided_rate);
+
 	return 0;
 
 err_unregister_clksrc:
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 10/15] ARM: at91: Implement clocksource selection

[Daniel Lezcano]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Allow selecting and unselecting the PIT clocksource driver so it doesn't
have to be compiled when unused.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/arm/mach-at91/Kconfig | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 903f23c309df..da1d97a06c53 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -107,6 +107,29 @@ config SOC_AT91SAM9
 	    AT91SAM9X35
 	    AT91SAM9XE
 
+comment "Clocksource driver selection"
+
+config ATMEL_CLOCKSOURCE_PIT
+	bool "Periodic Interval Timer (PIT) support"
+	depends on SOC_AT91SAM9 || SOC_SAMA5
+	default SOC_AT91SAM9 || SOC_SAMA5
+	select ATMEL_PIT
+	help
+	  Select this to get a clocksource based on the Atmel Periodic Interval
+	  Timer. It has a relatively low resolution and the TC Block clocksource
+	  should be preferred.
+
+config ATMEL_CLOCKSOURCE_TCB
+	bool "Timer Counter Blocks (TCB) support"
+	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAMA5
+	select ATMEL_TCB_CLKSRC
+	help
+	  Select this to get a high precision clocksource based on a
+	  TC block with a 5+ MHz base clock rate.
+	  On platforms with 16-bit counters, two timer channels are combined
+	  to make a single 32-bit timer.
+	  It can also be used as a clock event device supporting oneshot mode.
+
 config HAVE_AT91_UTMI
 	bool
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 14/15] clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static

[Daniel Lezcano]

From: kbuild test robot <lkp@intel.com>

Statisticize tc_clksrc_suspend and tc_clksrc_resume.

Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-atmel-tcb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c
index 9de8c10ab546..6ed31f9def7e 100644
--- a/drivers/clocksource/timer-atmel-tcb.c
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -66,7 +66,7 @@ static u64 tc_get_cycles32(struct clocksource *cs)
 	return readl_relaxed(tcaddr + ATMEL_TC_REG(0, CV));
 }
 
-void tc_clksrc_suspend(struct clocksource *cs)
+static void tc_clksrc_suspend(struct clocksource *cs)
 {
 	int i;
 
@@ -81,7 +81,7 @@ void tc_clksrc_suspend(struct clocksource *cs)
 	bmr_cache = readl(tcaddr + ATMEL_TC_BMR);
 }
 
-void tc_clksrc_resume(struct clocksource *cs)
+static void tc_clksrc_resume(struct clocksource *cs)
 {
 	int i;
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 15/15] misc: atmel_tclib: Do not probe already used TCBs

[Daniel Lezcano]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

The TCBs that have children are using the proper DT bindings and don't need
to be handled by tclib.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/misc/atmel_tclib.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
index 194f774ab3a1..2c6850ef0e9c 100644
--- a/drivers/misc/atmel_tclib.c
+++ b/drivers/misc/atmel_tclib.c
@@ -111,6 +111,9 @@ static int __init tc_probe(struct platform_device *pdev)
 	struct resource	*r;
 	unsigned int	i;
 
+	if (of_get_child_count(pdev->dev.of_node))
+		return -EBUSY;
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return -EINVAL;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel