[PATCH 1/2] clk: bcm: Make BCM2835 clock drivers selectable

[Florian Fainelli <f.fainelli@gmail.com>]

Make the BCM2835 clock driver selectable by other
architectures/platforms. ARCH_BRCMSTB will be selecting that driver in
the next commit since new chips like 7211 use the same CPRMAN clock
controller that this driver supports.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/clk/bcm/Kconfig  | 9 +++++++++
 drivers/clk/bcm/Makefile | 4 ++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index 4c4bd85f707c..0b873e23f128 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -1,3 +1,12 @@
+config CLK_BCM2835
+	bool "Broadcom BCM2835 clock support"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on COMMON_CLK
+	default ARCH_BCM2835
+	help
+	  Enable common clock framework support for Broadcom BCM2835
+	  SoCs.
+
 config CLK_BCM_63XX
 	bool "Broadcom BCM63xx clock support"
 	depends on ARCH_BCM_63XX || COMPILE_TEST
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 002661d39128..e924f25bc6c8 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -5,8 +5,8 @@ obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
 obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
-obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
-obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835-aux.o
+obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2835.o
+obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2835-aux.o
 obj-$(CONFIG_ARCH_BCM_53573)	+= clk-bcm53573-ilp.o
 obj-$(CONFIG_CLK_BCM_CYGNUS)	+= clk-cygnus.o
 obj-$(CONFIG_CLK_BCM_HR2)	+= clk-hr2.o
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel