From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Marek Vasut <marex@denx.de>, Fabio Estevam <festevam@gmail.com>,
Shawn Guo <shawnguo@kernel.org>,
NXP Linux Team <linux-imx@nxp.com>
Subject: [PATCH V2 2/8] ARM: dts: imx53: Update USB configuration on M53Menlo
Date: Thu, 16 May 2019 00:45:55 +0200 [thread overview]
Message-ID: <20190515224601.4527-2-marex@denx.de> (raw)
In-Reply-To: <20190515224601.4527-1-marex@denx.de>
Turn USBH1 into Host and update the GPIO polarity of the
regulator to match new hardware.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
---
V2: Add enable-active-high property to the regulator node
---
arch/arm/boot/dts/imx53-m53menlo.dts | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 62bc6a95a477..7dddd7028bec 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -50,7 +50,8 @@
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
@@ -268,8 +269,10 @@
pinctrl_usb: usbgrp {
fsl,pins = <
- MX53_PAD_GPIO_2__GPIO1_2 0x1d5
- MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5
+ MX53_PAD_GPIO_2__GPIO1_2 0x1c4
+ MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4
+ MX53_PAD_GPIO_4__GPIO1_4 0x1c4
+ MX53_PAD_GPIO_18__GPIO7_13 0x1c4
>;
};
};
@@ -322,7 +325,7 @@
pinctrl-0 = <&pinctrl_usb>;
vbus-supply = <®_usbh1_vbus>;
phy_type = "utmi";
- dr_mode = "peripheral";
+ dr_mode = "host";
status = "okay";
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-15 22:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-15 22:45 [PATCH V2 1/8] ARM: dts: imx53: Update UART configuration on M53Menlo Marek Vasut
2019-05-15 22:45 ` Marek Vasut [this message]
2019-05-15 22:45 ` [PATCH V2 3/8] ARM: dts: imx53: Add ethernet PHY reset " Marek Vasut
2019-05-15 22:45 ` [PATCH V2 4/8] ARM: dts: imx53: Select netdev trigger for Yellow LED " Marek Vasut
2019-05-15 22:45 ` [PATCH V2 5/8] ARM: dts: imx53: Add power GPIOs " Marek Vasut
2019-05-15 22:45 ` [PATCH V2 6/8] ARM: dts: imx53: Add GPIO beeper " Marek Vasut
2019-05-15 22:46 ` [PATCH V2 7/8] ARM: dts: imx53: Add GPIO line names " Marek Vasut
2019-05-15 22:46 ` [PATCH V2 8/8] ARM: dts: imx53: Update pinmux settings " Marek Vasut
2019-05-16 11:36 ` [PATCH V2 1/8] ARM: dts: imx53: Update UART configuration " Fabio Estevam
2019-05-17 2:18 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190515224601.4527-2-marex@denx.de \
--to=marex@denx.de \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).